LELY STORM 130 P

LELY STORM 130 P
Flywheel forage harvesters
Efficient and energy saving forage
harvesters giving maximum output
www.lely.com
innovators in agriculture

Lely Storm 130 P
The Lely Storm 130 P sets new standards in trailed forage harvesting. Extremely high capacity
combined with low maintenance make this machine ideal for contractors and large farmers.
The reliability and long life of Lely Storm forage harvesters has been proven over many years
with high trade-in values acting as a proof of their quality.
Significant fuel saving
The Lely Storm 130 P has a high crop throughput with a minimal effort. The 130 P can already work accurately
and clean from about 55 kW (75 hp) This low horse power requirement allows significant fuel savings and
energy friendly chopping.
A clean sweep with the 1800 pick-up
Wide, bulky or uneven swaths with short crop are easily managed by the Lely Storm pick-up. The closely
spaced tines which are only only 54 mm apart in conjunction with the guide wheels ensure a clean and
neat pick up of the crop. The pick-up accurately follows the ground contours giving a smooth lifting action
without breaking the flow of the swath. The guide wheels are easily removed to reduce transport width
to a minimum. The tough auger ensures an even in-feed of the crop. The strong drive-line on the pick-up,
consisting of heavy duty chains and pinions is very reliable and is protected by a slip clutch in the event of an
overload.
2

Lely Storm
Huge flywheel power concept
The 4 intake rollers create maximum compression and ensure reliable and even
in-feed of the crop. The 1,300 mm flywheel with 10 knives and 5 blowing paddles
maximizes the chopping quality and provides powerful and rapid filling of
trailers. Setting of the flywheel to the shear bar is safe and simple without the
need for special tools.The easy and consistent blade sharpening system ensures
your knives will operate at peak performance at all times. The design of the
heavy duty reversible shear bar ensures easy maintenance.
Simple change of cutting length
The intake gearbox is supplied with easily interchangeable gears which provide
positive drive to the feed rollers and efficient pick-up reversing in all conditions.
The feed intake rollers are driven separately by heavy duty PTO shafts fitted with
individual slip clutches.
Unique onboard hydraulic system
The onboard hydraulics provide an independent, accurate oil flow which can
be fine tuned to the tasks in hand. A built-in oil pump with its own oil reservoir
supplies the hydraulic power for raising the pick-up, reversing the drive and
spout rotation. All parts of the system are fully integrated with electro-hydraulic
in-cab controls, which help reduce operator fatigue on long working days.
Lely Storm 130 P Profi
The Lely Storm 130 P Profi is equipped with an electronic metal detector. This
helps prevent damage by metal objects. The double stop ratchet stops the feed
rollers dead, immediately after detection. The on board hydraulics automatically
switch the drive to neutral.
Disc cutter
Five blowing paddles maximizes chopping quality
and provides powerful and rapid filling of trailers.
Power band drive
Tough, efficient, and low maintenance power band
drive system for the fly-wheel.
Sharpening
Quick and simple – with the rotor operating at low rpm and the intake feed
rollers in neutral, simply wind the grinding disc up to the knives. The knives will
quickly be razor sharp, again helping to maximise output.
3

TECHNICAL SPECIFICATIONS
LELY STORM 130 P 130 P Profi
Fly wheel diameter (cm) 130 130
Number of knives 10 10
Theoretical cutting length (mm)* 6 – 44 6 – 44
Required power (kW/HP) 55 / 75 55 / 75
Weight with 1800 mm pick-up (Kg) 1,730 1,730
PTO drive (rpm) 1,000 1,000
Pick-up width (mm) 1800 1800
Pick-up tine bars 5 5
Pick-up tine spacing (mm) 54 54
Blowing paddles 5 5 / 10
Disc cutter speed (rpm) 550 / 620 550 / 620
Electro-hydraulic control box Finger-tip Finger-tip
Tractor connection
Reverse gearbox
1 hydraulic single acting for
hitch (optional)
Oilbath with built-in dogclutch
1 hydraulic single acting for
hitch (optional)
Oilbath with built-in dogclutch
Shearbar Reversible with hard facing Reversible with hard facing
Grinding device
Integral with free running
grinding disc
Integral with free running
grinding disc
Tyres 11.5/80-15.3 11.5/80-15.3
Electronic metal detector X S
Vertical sprout extension O O
Horizontal spout extension O O
Trailer hitch O O
Lely, Astronaut, Astri, Atlantis, Attis, AWS, C4C, Calm, Commodus, Compedes, Cosmix, Discovery, F4C, Fertiliner, Gravitor, Grazeway,
Hibiscus, Hubble, Juno, L4C, Lely Center, Lelywash, Lotus, Luna, Nautilus, Orbiter, Qwes, SAE, Shuttle, Splendimo, Storm, T4C, Tigo,
Viseo, Voyager, Walkway and Welger are registered trademarks of the Lely Group. The right of exclusive use belongs to the companies
of the Lely Group. All rights reserved. The information given in this publication is provided for information purposes only and does not
constitute an offer for sale. Certain products may not be available in individual countries and products supplied may differ from those
illustrated. No part of this publication may be copied or published by means of printing, photocopying, microfilm or any other process
whatsoever without prior permission in writing by Lely Holding S.à r.l. Although the contents of this publication have been compiled with
the greatest possible care, Lely cannot accept liability for any damage that might arise from errors or omissions in this publication.
www.lely.com
Live Life Lely