Superchips Redline Users Manual - RealTruck.com

O P E R A T I N G I N S T R U C T I O N S
is being displayed. If you are
in the menus while driving,
your miles are not calculated.
--ODOMETER SETUP--
1. Locate the “Maintenance
Manager” by entering the “Main
Menu”.
2. Turn “ON” the Maintenance
Manager. (If
it is turned off,
you will not be
notified when
service is
due.)
3. Choose
“Odometer” to
set your current
Odometer
reading.
The following screen will appear:
4. Use the
Arrow buttons
to adjust the
values up or
down.
5. Press the Enter button to
move to the next Digit.
6. Once all digits have been entered,
the Maintenance Manager
screen will reappear showing
your entered value.
7. Once the Odometer is entered
and displayed,
chose
the “Maintenance
Items”
option, and
refer to the following section.
--MAINTENANCE SETUP--
1. Chose the item you would
like to maintain. For demonstration
purposes, the “Change
Engine Oil”
item will be
used in this
example.
2. Turn the ALERT ON.
NOTE: Once
a Maintenance
Item
is turned
on, the Alert
Status Box
to the left of
the item will
light up. If
it is green,
the item is
not yet due for service. If it is
yellow, the item is about to be
due and within the specified
Alert Threshold. If it is red,
the item is due for service. If
it remains black, the item is
not turned on. This all depends
on the following settings.
18