Component Catalogue - Lifting Systems 07/05/2013 - KLH

O N S I T E I N S T A L L E D L I F T I N G S Y S T E M S
03 ON SITE INSTALLED LIFTING SYSTEMS
Würth System
The proprietary system consists of Assy Kombi screws
and a lifting anchor in accordance with the enclosed data
sheet.
The Würth lifting system is only suitable for horizontal
panel delivery and horizontal panel handling (e.g. floor
panels), vertical handling is not permitted.
The Assy Kombi screw needs to be installed in the pull
direction of the crane chain. Diagonal pull forces are not
permitted with this system.
TRANSPORT ANCHOR
with chain link and stop on cross
bar
In conjunction with the ASSY® 3.0
Combi Screw, an expertise is
available for the system
Steel, yellow galvanized (A2C)
Load
level in
tons
Weight
in kg
a
in
mm
c
in
mm
d
in
mm
e
in
mm
f
in
mm
g
in
mm
h
in
mm
Art. No. P.
Qty.
1.0-1.3 0.7 12 165 130 30 40 5 13 0184 000 13 2
Function and application:
• For transporting wooden components in
conjunction with the ASSY ® 3.0 Combi
Screw.
• Any rotating, tilting and swiveling
movement is possible and harmless even
under load.
• The transport anchor enables the safe,
simple lifting o of all types of wooden
components.
• Expertise available. This is available
at www.wuerth.de, in the section: My
industry/Engineers, planners, architects/
Approvals/.
• The transport anchor complies with the
Machine Directive (89/392/EEC) in the
version 93/44/EEC.
Maintenance
• The transport anchor must be inspected
by an expert/safety representative of the
company at least once a year. In addition
to damage of any kind, the degree of
wearing must primarily be determined.
• Modi cations and repairs, especially
welding on the transport anchor are not
permitted!
• For safety reasons, the screws may only
be used once.
The permissible
maximum limit
dimension for the
dimension "h" is 13 mm.
If the limit dimension is
exceeded, the anchor
may no longer be used.
h
Recess: Depth 3 cm/dia. 70 mm
MWF - 12/11 - 07997 - ©
The load-bearing capacity of the transport anchor in conjunction with
the ASSY ® 3.0 Combi Screw must be proven separately –
see test report/expertise.
Screws: ASSY ® 3.0 Combi
dia. 12 mm, Art. No. 0184 112 …
Recommendation: 0184 212 181
Total length just 180 mm
Thread length 145 mm
Installation and handling of the Würth system is to be carried out strictly in accordance with the manufacturers’ recommendations.
1 8