Drainage Design Management System User's Manual
Drainage Design Management System User's Manual Drainage Design Management System User's Manual
9. Establish Sub Basin Data Select Sub Basins from the Hydrology\Basins Menu. Add or Copy records to populate the necessary data as shown below. Forms may look different depending on the established project defaults. To populate the remaining data, click “Update Data”. This updates all records for the Sub Basin data for this Project. Following the Update Data, if there are any errors or values falling outside standards, then a report will come to the screen that can be printed. Review this report to see what needs to be fixed. 10. Establish Routing Data Select Routing from the Hydrology\Basins Menu. Add or Copy records to populate the necessary data as shown below. Forms may look different depending on the established project defaults. KVL Consultants, Inc Drainage Design Management System – User’s Manual 92-38.doc Ex-7
11. Develop Draft HEC-1 Input File Select Develop Draft Model Data from the Hydrology\HEC-1 Menu. Select the appropriate Major Basin and check whether or not to create Draft Routing Cards. Click on “Create Draft”. 12. Edit Draft HEC-1 Input File Select Edit HEC-1 Data from the Hydrology\HEC-1 Menu. Select the appropriate Major Basin ID. The best way to edit this data is to export the file to an ASCII file and edit the data and then import the ASCII file when edits are complete. Click “Export” to export the file. A dialogue box comes up with the default model runs path and the Basin ID. Click save. KVL Consultants, Inc Drainage Design Management System – User’s Manual 92-38.doc Ex-8
- Page 1 and 2: FLOOD CONTROL DISTRICT of MARICOPA
- Page 3 and 4: Table of Contents (Cont’d) 6. GIS
- Page 5 and 6: A table also consists of one or mor
- Page 7 and 8: 2. General Features Main Menu The M
- Page 9 and 10: Marks the current record for deleti
- Page 11 and 12: Open To open an existing project, m
- Page 13 and 14: Backup Project Use this option to b
- Page 15 and 16: 4. Hydrology Rainfall Prefre The se
- Page 17 and 18: There are three columns in the Soil
- Page 19 and 20: It is important to enter appropriat
- Page 21 and 22: Distributions Time-Area The selecti
- Page 23 and 24: Edit HEC-1 Data This selection allo
- Page 25 and 26: 5. Hydraulics To be developed KVL C
- Page 27 and 28: 7. Utilities Export Data The select
- Page 29 and 30: good practice is to first export a
- Page 31 and 32: 8. Help and Window Help About This
- Page 33 and 34: 1. Establish Path for Model Runs Cr
- Page 35 and 36: 4. Establish Land Use Defaults Sele
- Page 37: 7. Establish Soil Data Select Data
- Page 41: 13. Run HEC-1 Model Select Run HEC-
9. Establish Sub Basin Data<br />
Select Sub Basins from the Hydrology\Basins Menu. Add or Copy records to populate<br />
the necessary data as shown below. Forms may look different depending on the<br />
established project defaults. To populate the remaining data, click “Update Data”. This<br />
updates all records for the Sub Basin data for this Project.<br />
Following the Update Data, if there are any errors or values falling outside standards,<br />
then a report will come to the screen that can be printed. Review this report to see what<br />
needs to be fixed.<br />
10. Establish Routing Data<br />
Select Routing from the Hydrology\Basins Menu. Add or Copy records to populate the<br />
necessary data as shown below. Forms may look different depending on the established<br />
project defaults.<br />
KVL Consultants, Inc<br />
<strong>Drainage</strong> <strong>Design</strong> <strong>Management</strong> <strong>System</strong> – User’s <strong>Manual</strong><br />
92-38.doc<br />
Ex-7
Change language