Drainage Design Management System User's Manual

More documents

Recommendations

Info

3. File New The selection of New from the File Menu is used to create a new project. It is necessary to fill in the Project ID, Title and the path to the model runs on the Title form. The Project ID will be used throughout the application for all files that refer to this project. Model runs for all projects will have the same naming convention. It is therefore necessary to establish separate folders for each project’s model runs. Create the folder using Windows Explorer and then use the button to locate the folder. When finished with the Title data, enter the Hydrology default data. The Hydrology view varies depending on which model is selected. KVL Consultants, Inc 3-1 Drainage Design Management System – User’s Manual 92-38.doc
Open To open an existing project, make a selection from the drop down list. Edit The selection of Edit from the File Menu is used to edit an existing project. All data on this form can be modified except the Project ID. If it is necessary to change the Project ID, “Rename” the project in Management. If default data is changed, make sure that the appropriate data on other forms is also modified. For example, if the reach routing method is changed from “Normal Depth” to “Kinematic Wave”, it will be necessary to modify the routing data. KVL Consultants, Inc 3-2 Drainage Design Management System – User’s Manual 92-38.doc
Page 1 and 2: FLOOD CONTROL DISTRICT of MARICOPA
Page 3 and 4: Table of Contents (Cont’d) 6. GIS
Page 5 and 6: A table also consists of one or mor
Page 7 and 8: 2. General Features Main Menu The M
Page 9: Marks the current record for deleti
Page 13 and 14: Backup Project Use this option to b
Page 15 and 16: 4. Hydrology Rainfall Prefre The se
Page 17 and 18: There are three columns in the Soil
Page 19 and 20: It is important to enter appropriat
Page 21 and 22: Distributions Time-Area The selecti
Page 23 and 24: Edit HEC-1 Data This selection allo
Page 25 and 26: 5. Hydraulics To be developed KVL C
Page 27 and 28: 7. Utilities Export Data The select
Page 29 and 30: good practice is to first export a
Page 31 and 32: 8. Help and Window Help About This
Page 33 and 34: 1. Establish Path for Model Runs Cr
Page 35 and 36: 4. Establish Land Use Defaults Sele
Page 37 and 38: 7. Establish Soil Data Select Data
Page 39 and 40: 11. Develop Draft HEC-1 Input File
Page 41: 13. Run HEC-1 Model Select Run HEC-

Drainage Design Management System User's Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?