LT3-00032-2-A - DDKS Industries, hydraulic components distributor
LT3-00032-2-A - DDKS Industries, hydraulic components distributor
LT3-00032-2-A - DDKS Industries, hydraulic components distributor
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FLUID CONNECTION<br />
NOMENCLATURE<br />
(For ISO circuits Figures 14 & 15)<br />
FLUID CONNECTIONS<br />
item<br />
description<br />
1 piston pump<br />
2 vane chambers<br />
3 rotary servo<br />
4 auxiliary pump<br />
5 servo pressure relief valve<br />
(modulated by operating pressure)<br />
6 replenish pressure relief valve<br />
7 sequence valve<br />
8 compensator pilot valve<br />
9 override pressure valve or<br />
servo pressure sequence valve<br />
10 replenish ring check valve<br />
11 external auxiliary boost pump<br />
12 shuttle valve<br />
specification term Goldcup P2430P Goldcup P24/30S<br />
A & B system, in. 2.0 2.0<br />
SAE code 62 split flange mm 50,8 50,8<br />
AG1, BG1, A,B system gage<br />
straight thread, o-ring seal SAE -6 -6<br />
AG2, BG2, A,B system gage<br />
straight thread, o-ring seal SAE -8 -8<br />
C, aux. pump inlet, servo & repl. in. 2.0 2.0<br />
SAE code 61 split flange mm 50,8 50,8<br />
D1, D2, case drains,<br />
straight thread, o-ring seal SAE -20 -20<br />
D3, shuttle drain SAE - -16<br />
DG, case gage<br />
straight thread, o-ring seal SAE -6 -6<br />
DG2, case filling for vertical mounted<br />
units, straight thread, o-ring seal SAE -4 -4<br />
DV, external drain pilot valve SAE - -4<br />
FA, FB, control pressure gage<br />
straight thread, o-ring seal SAE -6 -6<br />
1) G, aux. pump outlet, servo & repl.<br />
to external filter SAE -12 -12<br />
H1, aux. pump inlet, servo & repl., from<br />
external filter, str. thd., 0-ring seal SAE -12 -12<br />
H2, servo gage, straight thread,<br />
o-ring seal SAE -6 -6<br />
K, optional replenishing supply inlet,<br />
straight thread, o-ring seal SAE -32 -32<br />
KA, shuttle relief inlet SAE - -12<br />
KG, replenishing gage,<br />
straight thread, o-ring seal SAE -6 -6<br />
V, compensator vent, VA, A-side<br />
vent, VB, B-side vent, straight<br />
thread, o-ring seal SAE -4 -4<br />
1) Reference: viewing main shaft end of pump this port is located at 5 o’clock in the<br />
standard adapter cover and at 11 o’clock position in the rear drive adapters.<br />
40