General Sports Medicine Brochure - Biomet

Biomet Sports Medicine, a wholly owned subsidiary of Biomet, Inc., entered the 

arthroscopy market in 1990 when it purchased the assets of Arrow Surgical Technologies, 

Inc. of San Dimas, California. Today the product line offering includes more than 3,000 

products to address the $1.2 billion worldwide market. Working in conjunction with the 

industry’s most innovative surgeons, Biomet Sports Medicine is now focusing its research 

and development efforts on technique-specific instruments and implants for anterior 

cruciate ligament (ACL) reconstruction and arthroscopic shoulder repairs. 

Along with the development of new products for the 

arthroscopic industry, Biomet Sports Medicine invests heavily 

in surgeon education, providing them hands-on learning 

opportunities to keep them current in modern arthroscopic 

surgical procedures. The Biomet Sports Medicine Sales Force is 

likewise educated to become an informational asset for surgeons. 

Training takes place in two state-of-the-art cadaver labs, one in 

Warsaw, Indiana and the other in Ontario, California. 

Warsaw, Indiana 

Biomet Sports Medicine is headquartered in Warsaw, Indiana within the Biomet, Inc. 

home office. California is the home of Biomet Sports Medicine’s instruments and implants 

manufacturing site in Ontario and capital equipment in Redding. Shipping of finished 

goods comes from each of these three locations specific to the products that are 

produced there. 

Biomet Sports Medicine is pleased to offer the most advanced arthroscopic products 

available today. Should you have questions regarding the product line or would like 

to have a Sales Representative contact you, please call the Corporate Headquarters at 

800.348.9500 ext. 1501 for information.

Howell 65˚ Tibial Guide 

• Aids in the prevention of 

PCL impingement 

• Aids in the prevention of roof 

impingement without 

performing a roofplasty 

• Allows for replication of the 

tension pattern of the intact ACL 

Autogenous Bone Coring System 

• Allows for the harvesting of bone 

plugs from both the tibial and 

transverse tunnels for later 

implantation in ACL surgery 

• Positions autogenous bone in 

femoral and tibial tunnels near 

the joint aperture 

• Increases the strength and 

stiffness of fixation in soft tissue 

ACL reconstruction 

• Harvest a bone plug that can be 

used to replace the patella and tibial 

defects in Bone-Patellar Tendon-Bone 

ACL reconstructions 

Fanelli PCL/ACL Guide 

• Adjustable guide facilitates 

accurate and reproducible tunnel 

placement for PCL and ACL 

reconstruction 

• One guide used for both tibial 

and femoral tunnels in PCL 


Fanelli System Instruments 

• Unique instruments protect the 

neurovascular structures at the 

posterior aspect of the knee.

KNEES 

Graft Tensioning Boot 

• Self retaining tensioner eliminates 

manual tensioning 

• Allows surgeon to use both hands 

for tibial fixation 

• Tension grafts up to 20 lbs. 

Tendon Strippers 

• Closed-Ended stripper easily 

separates hamstring tendons from 

muscle attachments when grafts are 

detached from the distal tibia 

• Open-Ended stripper bluntly strips 

hamstring tendons from muscle 

attachments when grafts are left 

attached to the distal tibia 

acl/pcl instrumentation 

Bone-Tendon-Bone 

Instrument System 

• Complete with graft harvest, tunnel 

and fixation instrumentation 

• Accommodates either the Howell 

65˚ Tibial Guide, Modular Guide or the 

Fanelli PCL/ACL Guide 

• Instrumentation for titanium TunneLoc ® 

interference screws or LactoSorb ® 

Gentle Threads interference screws 

ACL/PCL Disposables 

• Disposable guide wire kits 

that are unique to each 

fixation system 

• Bone-tendon-bone blade 

kits for various capital 

equipment saws

Bone Mulch Screw 

• Only femoral tunnel fixation that 

allows visualization of 

graft passage 

• Cannulation allows compaction 

of bone into femoral tunnel 

around ACL graft 

• Bone graft fills voids, promoting 

rapid healing of ACL graft 

to tunnel 

• Strength: 1126 N (1) 

• Stiffness: 225 N/mm (1) 

EZLoc Femoral 

Fixation Device 

• Titanium implant that has 

optimal strength properties and 

captures cortical bone 

• Surgical technique that has 

minimal steps with reliable and 

reproducible deployment 

• Device captures the cortical 

bone of the femur, preventing 

movement under cyclic loading 

• Strength: 1427 N (2) 

Allograft Cross Pin 

• Non-cannulated for 

maximum strength 

• Allograft Cross Pin has a 

failure load of 889 N (2) 

AXL Cross Pin 

• Made of titanium or 

LactoSorb ® L15 

resorbable copolymer 

• Simplified graft passage with 

the use of the graft pusher 

• Reliable implant placement by 

implanting over a rigid wire 

• U-guide aids in accurate 

transverse tunnel placement 

• Ti Strength: 1780 N (2) 

• L15 Strength: 1031 N (2) 

Gentle Threads 

Interference Screws 

• Blunt thread design assists in 

protecting the graft 

• Driver design distributes 

torque evenly throughout the 

entire screw to help prevent 

the screw from breaking or 

stripping 

• Screws are compatible with 

1.5mm Nitinol guide wires 

• Easy-out screw remover 

virtually eliminates the 

difficulty of removing screws 

• Round head and fully threaded 

designs both available

KNEES 

Bio-Core 

Interference Screw 

• Resorbable interference screw 

made of LactoSorb ® L15 


• Fenestrations allow screw 

contents to be in contact with 

tendon/tunnel wall 

• Ability to be filled with 

osteoconductive material to 

allow for bone growth 

• Screw insertion is no different 

than other interference screws 

• Nothing else like it on the market 

ToggleLoc Femoral 


• Femoral fixation device that 

captures the cortical bone 

of the femur 

• Designed with a simple surgical 

technique with few steps and no 

need for a U-guide 

• Loop is made of polyethylene, 

designed for strength and stiffness 

• Packaged pre-loaded with Max- 

Braid PE passing suture on 

a unique card, allowing simple 

loading of the graft 

• Requires only simple instruments, 

a depth gauge and a 4.5mm 

drill bit 

ToggleLoc Femoral 

Fixation Device with 

ZipLoop Technology 

• ZipLoop Technology maximizes 

soft tissue graft-to-tunnel 

interface 

• One implant for varying tunnel 

lengths—eliminates the need for 

multiple sizes 

• Tension can be applied from 

femoral side after tibial fixation is 

achieved 

• Uniquely woven polyethylene 

construct is gentle to graft and is 

slippage resistant 

acl/pcl fixation 

TunneLoc Round Head 


• Round head reduces the possibility 

of graft damage during or after 

graft implantation 

• Standard 2.5mm and 3.5mm 

hex for easier insertion and removal 

• Cannulated for use with a 

guide wire 

• Less aggressive middle 

threads reduce the possibility 

of graft damage 

• Tapered tip for easier starts 

and straighter tracking 

TunneLoc Fully Threaded 


• Universal screw for either 

tibial or femoral applications 

• Designed to reduce the 

possibility of bone plug 

migration during placement 

• Cannulated for use with a 

guide wire 

• Standard 3.5mm hex for easy 

insertion and removal 

• Tapered tip for easier starts 

and straighter tracking 

Poly Suture Button 

• Solid fixation for either 

primary or auxiliary 

fixation in ACL or PCL 


• Distal fixation allows 

circumferential healing 

of the ACL graft to the 

tunnel wall

WasherLoc Tibial 


• Bi-cortical fixation with either 

cortical or cancellous screws 

• Countersunk to avoid 

hardware prominence and 

patient discomfort 

• Distal fixation allows 

circumferential healing of 

graft to the tunnel wall 

• Strength: 905 N (3) 


No-Profile Screw 

and Washer 

• Designed to be the lowest profile 

screw and washer on the market 

• 14, 18 and 20mm washers 

maximize soft tissue fixation 

• Cruciate screwdriver reduces 

strippage that results from high 

torque used in screw insertion 

and removal 

• Tapping and self-tapping screws 

available in 30–60mm in 2mm 

increments 

CentraLoc Tibial 


• Made of LactoSorb ® L15 


• Smooth post increases 

tunnel-to-graft interface 

assisting circumferential healing 

• Insertion is as easy as an 

interference screw, but without 

the need for a guide wire 

or dilator 

• Strength: 1176 N (2) 


Resorbable No-Profile 

Screw and Washer 

• LactoSorb ® L15 resorbable copolymer 

with 80% strength in eight months (2) 

• Versatile soft tissue applications 

• Simple technique 

• Strength: 712N (2)

KNEES 

Meniscus Staple 

• Two-pronged implant for optimal 

pullout and strength retention 

throughout the healing process 

• U-shape helps to prevent implant 

from migrating through the tear 

during insertion 

• No head to contact condylar 

surface 

• Small curved instrumentation 

provides access to all zones 

• Implant placement is more 

versatile due to the width of two 

pronged implant. 

• 11 and 13mm lengths 

Meniscus Screw 

• Countersunk implant will 

assist in preventing femoral 

condyle damage 

• Tapered implant can be 

removed for repositioning 

• Greater tactile feel than 

pushing or malleting 

the implant 

• Implant packaged pre-loaded 

on disposable driver 

MENISCUS REPAIR 

CARTILAGE REPAIR 

OCD Microfracture System 

• Pick designed to stimulate 

healing of osteochondral 

defects—safer than drilling 

• Instrumentation designed 

to access difficult regions of 

the intraarticular space for 

debridement 

LactoNail ® Bone Fixation 

• Various lengths and diameters 

to meet surgeon’s preference 

• Compression head 

• Barbed shaft to maintain 

compression 

• Easy insertion 

• Instruments may be 

used during an open or 

arthroscopic procedure 

• Strength: 87 lbs. (2)

CurvTek ® Bone Tunneling System 

• Consistent tunnels regardless of 

bone quality 

• Creates a strong bone bridge for each 

suture tie down 

• Fast and easy to use 

Charlotte Shoulder System 

• Complements all open, mini-open 

and arthroscopic procedures 

• Time-saving instrumentation 

• Modular system 

Nordt Knot Tightener 

• Allows both pushing and tightening 

of knots 

• Statistically as secure as hand-tied knots (10) 

• Most secure arthroscopic knots compared 

to a single hole and cannulated doublediameter 

knot pushers (10) 

• Allows tying of any type or size of suture

SHOULDERS 

BiPass Suture Punch 

• Dual purpose instrument that 

passes and retrieves suture 

simultaneously reducing O.R. time 

• Unique “trap door” captures 

suture—reducing suture 

management steps 

• Nitinol pusher maintains suture 

integrity 

• One hand operation for 

arthroscopic rotator cuff repair 

• Ergonomic, low profile design 

• Large tissue bite—up to 16mm for 

double row rotator cuff repair 

SpeedPass 

Suture Retrievers 

• Various tip curvatures 

for arthroscopic Bankart, 

SLAP and rotator cuff 

repairs 

• Sharp tip allows easy 

penetration through 

tissue 

• Simple thumb slide 

deployment system 

utilizing Nitinol loop for 

retrieving or passing any 

type of suture 

• Pigtail 70˚ curvature is 

ideal for reaching the low 

five o’clock position for 

anterior labral repair or 

capsular tissue plication 

SpeedPass 

Suture Lariat 

• Various tip curvatures 

for arthroscopic Bankart, 

SLAP and rotator cuff 

repairs 

• Sharp tip allows easy 

penetration through 

tissue 

• Accomplishes a simple 

shuttle step to pass suture 

through tissue 

• Passes suture outside the 

joint utilizing shuttle relay 

technique with Nitinol or 

monofilament 

MaxBraid PE Suture 

SHOULDER SYSTEMS 

• Made from 100% polyethylene 

• Unique braid which allows the suture to lie flat and 

improves knot security 

• Silky smooth feel is gentle on tissue and gloves 

Strength Comparison (lbs.) 

Ethibond 

Excell #2 4 

Fiberwire 

Suture 5 

MaxBraid 

Suture 2 

Tensile 27.01 60.96 69.18 

Knot 12.61 29.83 39.45

LactoScrew ® Suture Anchor 

• Allows the ability to reposition if unsatisfied 

with initial position 

• Simple insertion technique— 

tap only 

• Pullout strength (5.5mm): 87 lbs. (2) 

• 2.8mm, 3.5mm, 5.5mm and 6.8mm sizes 

• LactoSorb ® L15 copolymer resorbs 

in approximately two years (2) 

AutoKnot Pre-Tied Knot 

• Duncan Loop chosen for its great strength, 

efficiency, and gentleness to suture 

• MaxBraid Suture braided with 

Dyneema ® Purity fiber 

• LactoSorb ® L15 copolymer resorbs 

in approximately two years (2) 

• Available on 3.5mm, 5.5mm and 6.8mm 

LactoScrew ® Suture Anchors 

Harpoon ® Suture Anchor 

• Expanding wings for 

superior fixation 

• Stainless steel 

ALLthread 

Suture Anchor 

Ti-Screw Suture Anchor 

with EasySlide 

Surface Treatment 

• Easy sliding sutures 

• Allows the ability to reposition 

• Simple insertion technique 

• Pullout strength (5.0mm): 

120 lbs. (2) 

• Available in titanium, 

LactoSorb ® L15 copolymer 

and PEEK-Opitma ® polymer 

• Fully threaded 

• Cortical bone purchase 

• Double-loaded, double eyelet 

• Titanium anchor is offered in 

a triple eyelet version

Cannulated ArthroRivet Tack 

• Eliminates knot tying and suture 

management problems 

• Strong tissue fixation 

• Easy tissue grasping 

• Small implant size allows for multiple 

implant placement 

• Cannulated to align tack with drill hole 

• Strength: 44 lbs. (2) 

Rotator Cuff Buttress 

• Reduces suture cutting through bone 

during bone tunnel repair 

• No special instruments required 

• Universal size fits left and 

right tuberosities 

• Resorbs in 9–15 months (2) 

SHOULDERS 

Hitch Suture Anchor 

SHOULDER SYSTEMS 

MicroMax 

Suture Anchor 

• Easy deployment system 

• Mechanical fixation 

• Loaded with 

MaxBraid Suture 

• Material resorbs in 

approximately two years (2) 

• Small implant size allows for 

multiple implant placement 

• Available in PEEK-Optima ® 

polymer and LactoSorb ® L15 

copolymer 

• Available in 2.4mm for 

labral repair 

• Offset suture loop eyelet 

• Loaded with #2 

MaxBraid Suture 

• Small implant size allows for 

multiple implant placement 

SportMesh Soft Tissue 

Reinforcement 

• Soft tissue scaffold 

• Easy to cut and shape to soft tissue 

• Easy to handle 

• Controlled, intermediate 

resorption process 

• The degradation process causes a 

lack of an inflammatory response 

because the material is non-crystalline 

and has a low pH 

• High porosity which acts as a 

wick to soak and hold blood.

Precision Series Hand Instruments 

• Ergonomically designed handle gives 

surgeons the strength, durability and 

“feel” they desire 

• Teflon bushing in handle reduces the 

possibility of metal-on-metal wear and 

allows for smoother instrument function 

• The solid stainless steel design allows 

the hand and instrument to move as one, 

providing more comfort 

• Can result in less hand fatigue during 

lengthy surgical procedures 

• Designed to be the strongest handle 

and tube configuration available in a 

hand instrument 

hand instruments 

• Tapered tube design creates increased 

stability and strength to both actuator 

and the tube 

• Precision made cutters provide smooth 

and clean cuts even with the most 

difficult tissue 

• Low-profile jaws for easier entry into 

tight joint space 

• Multiple styles and tip configuration allow 

access into all areas

Absorb-O-Mat O.R. Floor Mat 

• Outstanding wicking, absorption 

and retention capabilities 

• Does not release fluids when 

stepped on 

• O.R. floor mat, prevents the mat from 

slipping, providing additional safety 

and peace of mind 

• Various sizes and shapes let you 

choose the best configuration suited 

to your application 

• One square foot absorbs one 

liter of fluid 

ArthroSorb Super Solidifier 

• Designed to quickly gel blood 

and body fluids 

• Guards against spills and 

leaks facilitating safer handling 

and trasport of potentially 

infectious fluids 

• 2 oz. gels up to 2,000 cc 

• Chlorine-free formula eliminates the 

risk of toxicity during incineration 

• Unlike competitive solidifiers, 

ArthroSorb Super Solidifier does not 

cause fluid expansion 

HAND INSTRUMENTS 

FLUID MANAGEMENT 

Fluid Management 

Five Gallon Disposable Container 

• Packaged collapsed, minimizes shelf 

space 

• Universal port fits most waste lines 

• Open/close valve to minimize spillage 

• Convenient carrying handle

ReUnite ® Small Screw System 

• Limited-torque compression head 

• Maximizes surgical options 

• Color-coded drill bits/taps 

• Drill guides for precise placement 

• Can be used with ReUnite ® plates 

ReUnite ® Orthopedic 

Plating System 

• Maximize surgical options 

• Geometric plates 

• Water activated heat packs for 

easy bending and forming 

• Able to be trimmed for 

desired shape 

• Precise pick-ups for handling 

• To be used with the ReUnite ® 

Screw System 

ReUnite ® Large 

Screw System 

• 3.5mm diameter fully 

threaded screws 

• 4.0mm diameter fully 

threaded screws 

• 5.0mm diameter fully and 

partially threaded screws 

• Cannulated or solid 

• Maximizes surgical options 

• Easy screw removal, 

if necessary

ReUnite ® Orthopedic 

Pin System 

• Diameters: 1.5mm x 3.2mm 

• Lengths: 20 – 70mm 

• Length-adjustable inserters 

• Combination depth/K-wire gauge 

and family of K-wires to aid in 

preparation of optimal hole for 

pin placement 

• Disposable kit available 

Weil-Carver Hammertoe System 

• Partially threaded for maximum stability 

• Partially barbed to help prevent 

pistoning 

• Completely internal to eliminate risk of 

pin tract infections 

• Patient-friendly— no external hardware 

small bone & joint 

Rattler Interference Screw 

• Designed for use in soft tissue 

reattachment procedures 

in the shoulder, wrist/hand, 

ankle/foot, elbow and knee 

• Retains 80% of its strength at 

eight weeks while being fully 

resorbed in 9–15 months (2) 

• Provides lasting strength 

throughout the healing 

process while resorbing in a 

timely fashion (2) 

Propeller Head 

Screw System 

• Self-drilling 

• Self-tapping 

• Self-countersinking 

• Low-profile head 

• Titanium alloy — greater torque 

strength, MRI & CT compatible 

• Partial thread lengths 

• Cor-cellous threads for use in 

cortical and cancellous bone 

• Cannulated for precise placement 

• Minimal instrumentation 

simplifies procedure, reduces 

O.R. time 

SMALL BONE & JOINT

PowerTek HR 

Digitial Video Camera 

• 3-chip all digital camera with 

programmable buttons on compact 

camera head 

• Unique software enhances depth 

perception for a natural color 

reproduction 

capital equipment 

PowerTek II Plus 

High Speed Shaver System 

• Capable of speeds up to 12,000 

RPM for efficient bone removal and 

meniscal cutting 

PowerPump ® LT 

Arthroscopy Pump 

• Provides constant visualization by 

maintaining dilation monitored by 

two pressure sensors to provide 

consistent joint pressure

• For use in a diagnostic environment 

• Can be used in addition to MRI or alone 

to determine the next plan of action 

for each patient 

• The InnerVue System is comprised of: 

• The system hardware, software 

and hand piece 

• A disposable scope 

• Reusable instrumentation (cannula, trocar, 

blunt obturator and cannula plug) 

• A procedural kit is also available that 

includes many sterile items such as tubing, 

skin prep, drapes (including the incise 

drape, stand drape, etc.), scalpel, 3-way 

valve, syringe, etc. 

diagnostic scope 

InnerVue Scope Hand Piece 

• Diameter of 1.2mm (about the size 

of an 18 gauge needle) and requires 

one portal 

INNERVUE SYSTEM C APITAL EQUIPMENT

B-One XR Bone Substitute 

• Animal studies jave demonstrated the 

material ban be 50% replaced with bone 

at six months 2 

• B-One XR Bone Substitute is a mixture 

of ceramic calcium sodium phosphate 

(CaNaPO 4O) powder and sodium citrate 

dihydrate (Na 3C 6H 5O 72H 2O) 

CuffPatch Soft Tissue Reinforcement 

• Purified—to remove undesired 

proteins, cellular debris and lipids 

• Laminated—eight layers provide 

optimal fixation 

• Crosslinked to help strengthen 

device for rotator cuff repair 

• Hydrated implant for fast and easy 

implantation—no wait time 

biomaterials 

• Non-refrigerated—the CuffPatch 

implant does not need to be 

refrigerated but should be stored 

at temperatures below 120˚ 

• The 6.5cm x 9cm implant can be 

trimmed to desired size without 

weakening or changing integrity 

of implant

The Strength of Resorbable Fixation 

Introduction 

Surgeons are increasingly recognizing the benefits of resorbable 

technology as an internal fixation option for their patients. 

Elimination of future implant removal surgery, clearer radiographs 

and more physiological load sharing between the implants and 

the surrounding tissues have the potential to positively impact 

both the outcomes and economics of surgery. Recent advances 

in biomaterials science have produced new resorbable polymers. 

Coupled with the introduction of new implant configurations 

similar in form and function to those of traditional metal systems, 

resorbable internal fixation is a dominant treatment modality. 

Resorbable Fixation Dynamics 

The LactoSorb ® copolymer is a unique chemical combination of 

L-lactic acid (82%) and glycolic acid (18%). This formulation 

provides a perfect balance of properties, i.e., strength retention/ 

loss timed to complement healing, complete mass loss in 

9–15 months and enhanced biocompatibility during degradation, 

principally due to the lack of crystallinity. 

The ReUnite ® system includes pins, screws, plates, sheets and mesh 

panels, providing the “building blocks” to suit a wide variety of 

clinical needs. Innovations such as cannulated resorbable screws 

and plates, sheets and mesh panels that can be heated, cut and 

shaped, enhance the versatility of the system. 

Initially, 100% of the strength of the repair site is provided by the 

resorbable implants. When the implants lose all strength, then 

100% of the fixation should be provided by the biological union. 

At intermediate times, the load is shared between the resorbable 

implants and the partially healed union. Ideally, the loss of strength 

of the resorbable fixation should mirror the increase in strength 

of the biological union over a six to eight week period so that 

substantial strength of repair exists through all phases of healing. 6,7 

The LactoSorb ® L15 copolymer is a unique chemical combination 

of L-lactic acid (85%) and glycolic acid (15%). This composition 

possesses the initial strength similar to that of LactoSorb. ® In vitro 

studies show this material to hold about 70% of initial strength 

for over ten months. In addition, based on viscosity profile, the 

polymer is expected to fully degrade in just under 1.5 years. The 

material is thus suitable for applications where strength retention 

for over nine months is demanded. 9 

BIOMATERIALS

References 

1. To JT, Howell SM, Hull ML: “Contributions of femoral fixation methods to the stiffness of anterior cruciate 

ligament replacements at implantation. Journal of Arthroscopic and Related Surgery, 15:379–387, 1999. 

2. Data on file at Biomet Sports Medicine. Bench test results are not necessarily indicative of clinical 

performance 

3. Magen HE, Howell SM, Hull ML: “Structural properties of six tibial fixation methods for anterior cruciate 

ligament soft-tissue grafts.” American Journal of Sports Medicine, 27:35–43, 1999. 

4. Data supplied by DSM Dyneema. 

5. Testing performed by Arthrex, Oct. 2000. 

6. An YH, et al.: Clinical Orthopedics, 355: 330–311; 1998. 

7. Pietrzak WS, et al.: “Bioresorbable implants—practical considerations.” Bone, 19(1); 109S–119S. 

8. Pietrzak WS, et al.: “Effect of stimulated intraoperative heating and shaping on mechanical properties of a 

bioabsorbable fracture plate material.” Applied Biomaterials, 38(1): 17–24; 1997. 

9. Kumar M: “A novel engineered material: In vitro properties for 85L-Lactide 15 Glycolide.” Biomaterials Division, 

Biomet, Inc. 

10. Milia M, Peindl R, Connor P; “Arthroscopic Knot Tying: The role of instrumentation in achieving knot security.” 

Arthroscopy, Vol. 21, Issue 1 pp. 69 – 76, January 2005. 

Dyneema ® is a registered trademark of DSM Dyneema B.V. or an affiliate of Koninklijke DSM N.V. 

Fiberwire is a trademark of Arthrex. 

Ethibond is a trademark of Ethicon. Inc. 

LactoSorb ® is a trademark of Biomet Manufacturing Corp. 

All others are trademarks of Biomet Sports Medicine, Inc.

Should you have questions regarding the product line or would like to 

have a Sales Representative contact you, please call the Corporate Headquarters 

at 800.348.9500 ext. 1501 for information. 

Corporate Headquarters: 

Biomet Sports Medicine 

56 East Bell Drive 

Warsaw, IN 46582 

800.348.9500 

Manufacturing Location: 


4861 East Airport Drive 

Ontario, CA 91761 

800.535.8692 

Capital Equipment Location: 


6704 Lockheed Drive 

Redding, CA 96002

This material is intended for the Biomet Sports Medicine Sales Force 

and surgeons only. It is not intended to be redistributed without 

the express written consent of Biomet Sports Medicine. 

P.O. Box 587, Warsaw, IN 46581-0587 • 800.348.9500 ext. 1501 • ©2005, 2006, 2007 Biomet Sports Medicine, Inc. All Rights Reserved 

web site: www.biometsportsmedicine.com 

Form No. Y-BMT-1046/013107/K

General Sports Medicine Brochure - Biomet

Create successful ePaper yourself

Delete template?

Save as template?