MATERIAL SAFETY DATA SHEET - Sage Products Inc.

MATERIAL SAFETY DATA SHEET
Manufactured for: Manufactured by: Telephone:
Sage Products Inc. Foamex International Product Info 815 455 4700
3909 Three Oaks Road 1000 Columbia Avenue Technical Info 610 859 3138
Cary, IL 60013 Linwood, PA 19061 Emergency 610 859 3000
1 PRODUCT IDENTIFICATION
Product Name:
Pink or Green Foam Piece; Foam for Toothette – 145LF (R8653);
SOB Foam Head (8663); Toothette Plus Swab (R8666); Foam for
SOS (R8667)(R8691), Foam Head for SOB;
Product Number(s): 5601, 5602, 5602UT, 5602UT-X, 5603, 5604A-1*, 5605, 5699,
5699UT*, 6000, 6000-C, 6001, 6002, 6006, 6012, 6013, 6013-C,
6013-X, 6013-K, 6050, 6055, 6070, 6070-X, 6071, 6072, 6075,
6075-X, 6076, 6077, 6100, 6113, 6115, 6119*, 6120, 6171*,
6173, 6312-K, 6370-K, 6402, 6404, 6404-X, 6412, 6414, 6424,
6424-C, 6512, 6512-C, 6513, 6513-C, 6513-X, 6514-X, 6515-X,
6550, 6550-C, 6552, 6552-C, 6570, 6570-C, 6571, 6572, 6572-C,
6573-X, 6577-X, 6600*, 6600-C*, 6601*, 6602, 6602-C*, 6613,
6615, 6671, 6673, 6704, 6713*, 6771*, 6802, 6804, 6804-C,
6808, 6808-C, 6808-X, 6812, 6902, 6904, 9001, 6005, 6434,
6434-C, 6521-X, 6808-J, 6804-J, 6922, 6924, 9002, 9001-S,
9011, 6306, 6308, 6922-C, 9011-S, 9002-S, 6924-C,6516-J,
Sage Item Number: R8653, R8663, R8666, R8667, R8691 , 6714
Chemical Name:
Polyurethane Foam
* = Obsolete
Chemical Hazard Rating: Health 0
Flammability 1
Reactivity 0
2 HAZARDOUS INGREDIENTS / REPORTED HEALTH EFFECTS
None. Material is a fully cross-linked reaction product of polyhydroxy polyol,
toluene di-isocyanate, catalysts, surfactants, pigments, and water.
3 PHYSICAL DATA
Boiling Point: N/A Specific Gravity: 1 - 1 - 20 pcf
Solubility in Water: Insoluble. Evaporation Rate: None.
Vapor Pressure: None. pH = N/A
Vapor Density: None. Appearance & Odor: Uniform cellular
structure. Slight, characteristic odor.
4 FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: >500F
EXTINGUISHING MEDIA: Dry chemical, water, carbon dioxide.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained breathing apparatus in
enclosed areas.
SAGE MSDS #33 1

5 REACTIVITY DATA
Stability: Stable.
Hazardous Polymerization: Will not occur.
Conditions to Avoid: High temperature, open flame, strong oxidizers.
Incompatibility (Materials to avoid): Strong oxidizing acids, will degrade.
Hazardous Decomposition Products: Carbon monoxide, oxides of nitrogen, hydrogen
cyanide, acrylonitrile.
6 HEALTH HAZARD DATA
EMERGENCY AND FIRST AID PROCEDURES:
Eyes:
Skin :
Flush with water.
N/A
Inhalation : If overexposed to fumes or smoke, remove to fresh air. If
respiratory problems persist consult physician.
Ingestion :
N/A
7 SPILL OR LEAK PROCEDURES
IT IS MANDATORY TO KNOW AND FOLLOW YOUR LOCAL, STATE AND FEDERAL REGULATIONS ON
THE PROPER HANDLING AND DISPOSAL OF THIS MATERIAL.
RECOMMENDED STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED.
Waste Disposal Method: Landfill or incinerate.
Small Spills:
Large Spills:
Sweep up. No special steps needed.
Sweep up. No special steps needed.
8 SPECIAL PROTECTION INFORMATION
Respiratory Protection:
Local Exhaust:
Eye Protection:
Other Protective Equipment:
Fumes: organic vapor cartridges. Dusts: use dust mask.
Needed for hot wire cutting or flame lamination.
As appropriate around moving machine parts.
Dust collection equipment during buffing.
9 SPECIAL PRECAUTIONS
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING (SEE ALSO SECTIONS 4 & 7): STORE
AT ROOM TEMPERATURE.
SAGE MSDS #33 2

Large quantities should be stored in sprinkler protected areas, away from heat
or open flames.
10 PREPARATION OF MSDS
Prepared by Regulatory Affairs Department on: 12/5/96
This data was prepared from current, reliable sources, however, Sage Products Inc.
makes no warranty regarding its accuracy. Because of conditions beyond our control,
it is the user’s responsibility to determine safe conditions for usage.
Date Issued: 10/21/13 Revisions: 10/21/13
SAGE MSDS #33 3