O&O BlueCon 7 - O&O Software

3. You can create advanced settings for your image under Options.
Imaging Options
4. Click on Create Image, once you have completed the required settings.
5. Enter the target path of the drive you wish the image to be saved to. You can either
accept the suggested path or select another location.
6. The Image is automatically named after the creation date. You can however enter a name
manually. All information from the image will be saved, which you can later access
through Image Information in the Tools list.
7. Select Start. The image file will now be created.
Note:
Further settings options, i.e. Imaging Methods, can be found in the Chapter Imaging
Options.
Note:
If a drive is not large enough to store an image you will be prompted to select another.
You can also at this stage rename the file, i.e. 2_Test.omg.
Note:
Should not all connected drives be displayed, under Selection click on Refresh Drives.
82 l About O&O DiskImage User's Guide for O&O BlueCon 7