O&O BlueCon 7 - O&O Software

1. Select the Drivers icon.
2. You can now highlight a driver from the list. There are various options available to determine
the settings of each respective driver.
• Disabled: Sets the startup type to Disabled. The driver will not be loaded. To disable a
driver, select disabled from the Startup Type menu.
• Boot: Sets the startup type to Boot. The device starts before all others. The driver is
loaded and started whilst Windows boots up.
• System: Sets the startup type to System. The device starts after all boot devices have
been started. The driver will be started by the system at a defined time. This does not
necessarily have to be during the system startup.
• Auto: Sets the startup type to Automatic. The device starts only after all boot and system
devices have been started.
• Manual: Sets the startup type to Manual. The device will not start. The user can start it
up manually after logging on.
Service Management
You can find Services next to the Driver Management icon in the toolbar. The Service Management
function in the O&O DeviceManager can customize the startup type of Windows
services. This means defective or superfluous services can be disabled and thus enabling a
system start again. Proceed in the same way as with Driver Management.
Service Management
16 l O&O DeviceManager User's Guide for O&O BlueCon 7