O&O DiskImage 7 User's Guide - O&O Software
O&O DiskImage 7 User's Guide - O&O Software O&O DiskImage 7 User's Guide - O&O Software
Start directly from bootable disk 2. Select the device for which you want to load a driver. 3. Click Load. 4. Select the desired driver such as one on a connected hard disk, USB Stick or CD*. 5. In the dialog, select Open to install the driver. 6. You'll then see a program message informing you about the status of the installation. * Note: You can remove the Start CD from the drive in order to insert a driver CD from a manufacturer. Note: Under certain circumstances, you may receive a notice requiring you to restart if you have loaded an additional driver under Windows PE. This message is automatically generated by Windows PE but is irrelevant when starting from a CD. Simply reject the request and follow the further instructions in the pop-up window. Note: Encrypted drives are not supported under Windows PE Loading drivers O&O DiskImage-51
Start directly from bootable disk Create boot medium You can also run O&O DiskImage without installation directly from a bootable medium. The boot medium is based on Windows PE and can be used for, among other things, restoring your entire computer or the system partition provided you have created a corresponding image. If you purchased O&O DiskImage online, you've received an Email containing all the information you'll need for creating a bootable medium. To create the medium, you'll need our O&O BuildPE program, a blank disk (CD-R, DVD, Blu-ray Disc or USB-Stick) and the needed hardware (burner for CD-R/DVD or Blu-ray). You can learn more about creating a bootable medium with O&O BuildPE by visiting our website:http://www.oo-software.com/home/en/support/faq/oobuildpe/ If you're unsure, just contact our Support. We'll be happy to help you further. Remember to keep your license information handy:support@oo-software.com. O&O DiskImage-52
- Page 10 and 11: About O&O DiskImage 7 About O&O Dis
- Page 12 and 13: About O&O DiskImage 7 Image file An
- Page 14 and 15: System requirements System requirem
- Page 16 and 17: Features at a glance Mount files fr
- Page 18 and 19: Features at a glance Encryption You
- Page 20 and 21: Features at a glance Adapt size of
- Page 22 and 23: Features at a glance User Interface
- Page 24 and 25: Installation and registration Onlin
- Page 26 and 27: Installation and registration Just
- Page 28 and 29: Quick Start • For the simplified
- Page 30 and 31: Quick Start Note: If there is not e
- Page 32 and 33: Quick Start Add job Folder view: So
- Page 34 and 35: Quick Start Drive restoration Enabl
- Page 36 and 37: Quick Start 1. Please make sure tha
- Page 38 and 39: Quick Start Select Clone driving Se
- Page 40 and 41: Settings for drive imaging Image of
- Page 42 and 43: Settings for drive imaging Exclude
- Page 44 and 45: Settings for drive imaging Ignore b
- Page 46 and 47: File backup options When creating a
- Page 48 and 49: Settings for the restoration of dri
- Page 50 and 51: Machine independent restoration (M.
- Page 52 and 53: Machine independent restoration (M.
- Page 54 and 55: Machine independent restoration (M.
- Page 56 and 57: Settings for Cloning drives 1. To l
- Page 58 and 59: Start directly from bootable disk S
- Page 62 and 63: Scheduling functions Scheduling fun
- Page 64 and 65: Scheduling functions Scheduling job
- Page 66 and 67: Scheduling functions Job Assistant:
- Page 68 and 69: Scheduling functions Run commands b
- Page 70 and 71: Scheduling functions Mark the job s
- Page 72 and 73: Tools Image information O&O DiskIma
- Page 74 and 75: Create bootable media Burn Wizard W
- Page 76 and 77: Create bootable media Mount image f
- Page 78 and 79: Create bootable media Unmount drive
- Page 80 and 81: Create bootable media Combine incre
- Page 82 and 83: Create bootable media Map network d
- Page 84 and 85: Program settings Program settings Y
- Page 86 and 87: Program settings Reset security con
- Page 88 and 89: Program settings 7. You can also ad
- Page 90 and 91: Program settings Under Behavior you
- Page 92 and 93: Program settings Context menu of th
- Page 94 and 95: View 3. Read image information - di
- Page 96 and 97: Frequently asked questions • merg
- Page 98 and 99: Frequently asked questions Call the
- Page 100 and 101: Frequently asked questions Name of
- Page 102 and 103: Frequently asked questions IDS_ERRO
- Page 104 and 105: Support and Contact Support and Con
- Page 106 and 107: End user license agreement 3.7 (EUL
- Page 108 and 109: End user license agreement 3.7 (EUL
Start directly from bootable disk<br />
2. Select the device for which you want to load a driver.<br />
3. Click Load.<br />
4. Select the desired driver such as one on a connected hard disk, USB Stick or CD*.<br />
5. In the dialog, select Open to install the driver.<br />
6. You'll then see a program message informing you about the status of the installation.<br />
* Note: You can remove the Start CD from the drive in order to insert a driver CD from a manufacturer.<br />
Note: Under certain circumstances, you may receive a notice requiring you to restart if you have loaded an additional<br />
driver under Windows PE. This message is automatically generated by Windows PE but is irrelevant when<br />
starting from a CD. Simply reject the request and follow the further instructions in the pop-up window.<br />
Note: Encrypted drives are not supported under Windows PE<br />
Loading drivers<br />
O&O <strong>DiskImage</strong>-51
Change language