O&O DiskImage 7 User's Guide - O&O Software

Settings for drive imaging
Exclude files from an image
When using the imaging method Used Sector Imaging you have the option of excluding data from the image or compression.
Please follow these instructions for excluding data:
1. Enable the check next to the drive to be imaged under Drive imaging.
2. Make sure you have selected the method Complete/only used sectors under Imaging options.
3. In the Imaging options click on Advanced and open the dialogue to exclude files in Exclude from imaging.
4. In the right hand window select the files and folders you wish to exclude from the imaging and confirm this with
Add. Only the data on your selected drives will be excluded.
5. You can close the window after your settings are made. The changes you made will then be applied.
Exclude data from compression
Data that is already compressed, e.g. *.rar or *.zip files, will not be compressed any further during the imaging process
and so may be excluded from compression. To exclude data from compression, please follow the procedure laid down
in Exclude files from an image.
Lock a drive
You can lock the drive you wish to image during the imaging process. This prevents any changes being made to the
drive while the image is being created. The drive will no longer be displayed in Explorer and all applications will be
closed. The drive is not locked by default.
O&O DiskImage-33