Installation and System Requirements - O&O Software
Installation and System Requirements - O&O Software Installation and System Requirements - O&O Software
Job View In Jobs at the bottom of the screen, all defragmentation jobs available on the computer will be displayed. You can edit or remove these jobs by highlighting them and selecting the relevant function from the Menu. You can also access these functions by right-clicking. Report View When you have chosen to have status reports created, these will be displayed in Reports at the bottom of the screen. You can open a report by double-clicking it and having it displayed in your internet browser. Drive Status View Drive Status at the bottom of the screen displays additional information on selected drives before and after the defragmentation. General Divided into four sections, this Tab supplies information about your drive, the drive allocation, and the file system. The refreshed pie chart will dynamically represent the proportional level of fragmentation during a defragmentation run. Status Report The status report informs you about the file system and the number of files on your drive as well as about the dynamic, current status of the defragmentation. It contains the number of fragmented files before and after the defragmentation along with some additional information. File Status View File Status at the bottom of the screen provides an overview of the largest and most heavily fragmented files on your drive. The contents of this file system statistic can also be found in the status reports. You have to first analyze the file statistics of a drive in order to have them displayed here. This will occur after you click Analysis in the Ribbon Bar. O&O ClusterInspector O&O Defrag’s ClusterInspector offers you a convenient way of finding individual files within the Block View. The ClusterInspector can be enabled by clicking on a block in the Block View. The dialog window shows which clusters are occupied by which files. The File name can be found next to the cluster. To choose another cluster or block, enter the Start Cluster number. The list will be immediately refreshed. User's Guide for O&O Defrag 11 User Interface (GUI) l 23
ClusterInspector All about the file In the ClusterInspector you are provided with information regarding where individual file fragments are located on your hard disk and in addition, can see the cluster number or number of file fragments of a file. 1. Click on a cluster in the Block View. 2. The Cluster Inspector will then be opened and under Details it gives you the option to learn more about the selected file fragment. 3. All the corresponding file fragments will be highlighted in the block view. You can see the number of file fragments the file is divided into and where the fragments are located on the hard disk. The size of the respective fragments will also be displayed. Settings General The settings will specify the way O&O Defrag performs during analysis and defragmentation. Reports and Logging You can create status reports which you may be later examined as HTML documents. A maximum of 999 reports can be saved for one computer. You can enable this option if you want to log all O&O Defrag actions simultaneously in the Windows result log. You’ll be able to specify the level of detail you want recorded, whereby Level 1 records only errors as opposed to Level 4 which saves all information. Please note that Level 4 can include an enormous number of results which may end up using considerable disk space. Exclude Files If you don’t want to include certain files and/or directories in a defragmentation, you’ll be able to specify them here. These files will be ignored in the defragmentation. 24 l User Interface (GUI) User's Guide for O&O Defrag 11
- Page 2 and 3: O&O Defrag 11 Rev. 2008-08-27 ©199
- Page 4 and 5: Recommended Application . . . . . .
- Page 6 and 7: About O&O Defrag Welcome to O&O Def
- Page 8 and 9: The Workstation Edition contains th
- Page 10 and 11: In a network, you must be the domai
- Page 12 and 13: When updating from a previous versi
- Page 14 and 15: Online Registration Using a Trial V
- Page 16 and 17: 1. In the Defragmentation tab click
- Page 18 and 19: Defragment Single Drives 1. Select
- Page 20 and 21: Windows Vista/ XP/2003/2008 Windows
- Page 22 and 23: shadow copies. Although these files
- Page 24 and 25: Recommended Application The COMPLET
- Page 26 and 27: User Interface (GUI) Main View The
- Page 30 and 31: Task Tray Control If desired, an ic
- Page 32 and 33: Settings: Offline Defragmentation T
- Page 34 and 35: O&O Defrag Screen Saver The O&O Def
- Page 36 and 37: Controls: In this section, it is po
- Page 38 and 39: Creating A New Job Schedule On the
- Page 40 and 41: Drives Select the drives and defrag
- Page 42 and 43: O&O ActivityGuard Pro This feature
- Page 44 and 45: Please note: All commands must exis
- Page 46 and 47: Status Report Deleting Status Repor
- Page 48 and 49: COMPMOD:{C[,] | ... | Z | ALL} Star
- Page 50 and 51: MFT could not be defragmented Not e
- Page 52 and 53: Size of Drive All drive sizes suppo
- Page 54 and 55: O&O Defrag and Firewalls When I sta
- Page 56 and 57: O&O Support and Contact Technical S
Job View<br />
In Jobs at the bottom of the screen, all defragmentation jobs available on the computer<br />
will be displayed. You can edit or remove these jobs by highlighting them <strong>and</strong> selecting the<br />
relevant function from the Menu. You can also access these functions by right-clicking.<br />
Report View<br />
When you have chosen to have status reports created, these will be displayed in Reports at<br />
the bottom of the screen. You can open a report by double-clicking it <strong>and</strong> having it displayed<br />
in your internet browser.<br />
Drive Status View<br />
Drive Status at the bottom of the screen displays additional information on selected drives<br />
before <strong>and</strong> after the defragmentation.<br />
General<br />
Divided into four sections, this Tab supplies information about your drive, the drive allocation,<br />
<strong>and</strong> the file system. The refreshed pie chart will dynamically represent the proportional<br />
level of fragmentation during a defragmentation run.<br />
Status Report<br />
The status report informs you about the file system <strong>and</strong> the number of files on your drive<br />
as well as about the dynamic, current status of the defragmentation. It contains the number<br />
of fragmented files before <strong>and</strong> after the defragmentation along with some additional<br />
information.<br />
File Status View<br />
File Status at the bottom of the screen provides an overview of the largest <strong>and</strong> most heavily<br />
fragmented files on your drive. The contents of this file system statistic can also be found in<br />
the status reports.<br />
You have to first analyze the file statistics of a drive in order to have them displayed here.<br />
This will occur after you click Analysis in the Ribbon Bar.<br />
O&O ClusterInspector<br />
O&O Defrag’s ClusterInspector offers you a convenient way of finding individual files within<br />
the Block View. The ClusterInspector can be enabled by clicking on a block in the Block<br />
View. The dialog window shows which clusters are occupied by which files. The File name<br />
can be found next to the cluster.<br />
To choose another cluster or block, enter the Start Cluster number. The list will be immediately<br />
refreshed.<br />
User's Guide for O&O Defrag 11<br />
User Interface (GUI) l 23