You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Online at use-enco.com<br />
Fluids<br />
Delivers extended sump life versus previous generation semisynthetics.<br />
• Dramatically extends useful life without the need for tank-side biocides or fungicides<br />
• Compatible with a very wide range of material, including cast iron, steels, copper,<br />
titanium and aluminum alloys, and many plastics and composites<br />
• Optimized combination of cooling and lubricity for titanium machining applications<br />
• Provides superior corrosion inhibition on cast iron and eliminates “hot chip”<br />
and clinkering problems<br />
• Excellent alternative to chlorinated soluble oils<br />
on high-silica aluminum alloys<br />
• Contains no nitrites, triazines, phenols,<br />
chlorinated or sulfurized EP additives<br />
TRIM ® Metalworking Fluids<br />
E206 Soluble Oil<br />
• Designed as a general-purpose, multi-metal coolant for<br />
general machining of ferrous and nonferrous metals<br />
• EP additive controls built-up edge<br />
• Fine-emulsion particle size reduces carry-off and<br />
facilitates getting fluid to point of cut<br />
• Leaves a fluid, oily, non-gumming film<br />
SOL ® Heavy-Duty Soluble Oil<br />
• Excellent for the machining of aluminum<br />
and aluminum alloys<br />
• Leaves a fluid residue that will not varnish up<br />
• Wide applications range from 3 to 25%<br />
SC200 Semi-Synthetic Cutting &<br />
Grinding Fluid<br />
• Good for ferrous and nonferrous materials<br />
and aluminum<br />
• No smoke under normal conditions<br />
TRIM ® MicroSol ® 585XT<br />
Extended-Life, Nonchlorinated Semisynthetic<br />
Metalworking Fluids<br />
5 Gallon Pails<br />
Recommended starting dilution of 5% for all.<br />
DSS 700 & DSS 800— Semi-Synthetic<br />
• Ideal for general-purpose machining and grinding<br />
• Suited for ferrous and most nonferrous materials<br />
DSS 700 Cutting/Grinding Fluid<br />
• For light- to moderate-duty applications, such as<br />
milling, turning, drilling and surface grinding<br />
DSS Cutting/Grinding Fluid<br />
• Designed for moderate- to heavy-duty applications,<br />
such as deep hole drilling, boring, reaming, tapping,<br />
internal and/or grinding<br />
DSS T-TECH—Synthetic<br />
• Duty range: moderate- to heavy-duty operations<br />
• Recommended for machining and grinding<br />
aluminum, iron and steel<br />
• Excellent lubricity, rancidity and mold control<br />
DSY 4100—Synthetic<br />
• Ideal for roll and surface grinding<br />
• For light- to moderate-duty operations<br />
• Exceptionally good bacteria, mold, foam, and rust control<br />
• Best suited for cast iron, nodular iron, and carbon steels<br />
Reg. Sale<br />
Size Model # Price Price<br />
1 gal. PH404-3030 $32.15 $24.00<br />
5 gal. PH404-3031 136.55 109.00<br />
As Low As<br />
$<br />
19 95<br />
Each Case<br />
Qty.: 4+<br />
Price Each<br />
Case Less Than Case<br />
Description Size Qty. Model # Case Qty.<br />
TRIM ® E206 1 gal. Jug 1 PH319-3910 — $22.00<br />
TRIM ® E206 5 gal. Pail 1 PH319-3911 — 96.89<br />
TRIM ® SOL 1 gal. Bottle 4 PH319-3899 $27.84 25.98<br />
TRIM ® SOL 5 gal. Pail 1 PH319-3900 — 92.95<br />
TRIM ® SC200 1 gal. Bottle 4 PH319-3906 22.77 24.40<br />
TRIM ® SC200 5 gal. Pail 1 PH319-3907 — 79.00<br />
100%<br />
Compatible<br />
with the<br />
Original<br />
VALCOOL ®<br />
OAKWASH ® DSC AL<br />
• Recommended for cleaning individual machine and central system<br />
reservoirs, metalworking fluid lines, premix tanks, machines and parts<br />
• Improves rancidity control by removing dirt, grit,<br />
insoluble soaps and oils<br />
• Removes insoluble soaps from dirty central systems in hard water<br />
areas. Does not redeposit soil<br />
• Can also be used at 4% to 5% for aluminum quenching<br />
• Thoroughly removes chip deposits and tramp oil from<br />
central systems and machines<br />
• Contains corrosion-inhibiting ingredients to protect<br />
machines and parts, both ferrous and nonferrous,<br />
from rusting during cleaning<br />
Starting At<br />
$<br />
52 95<br />
Oak Signature VALCOOL® Reg. Sale<br />
Model No. Equivalent Model # Price Price<br />
DSY 4100 VNT 920 PH893-1987 $61.09 $52.95<br />
DSS 700 VNT 700 PH893-1986 99.35 65.99<br />
DSS 800 VNT 800 PH893-1985 118.59 79.95<br />
DSS T-Tech Turn Tech PH893-1984 110.50 78.99<br />
Sale Price<br />
Model # PH893-1988<br />
$<br />
62 95<br />
Regular Price: $92.62<br />
Vactra ® No. 1, 2, 3<br />
& 4 Way Oil<br />
For all combinations of cast iron, steel<br />
and nonmetallic way materials on<br />
small-to-medium machine tools; flood<br />
application in large machines.<br />
• Additives eliminate stick-slip and chatter<br />
under thin-film lubrication conditions;<br />
allows smooth, uniform motion<br />
even at low table speeds<br />
• Contains no Class 1<br />
ozone-depleting chemicals<br />
As Low As<br />
$<br />
14 99<br />
<strong>SAVE</strong><br />
UP TO<br />
25%<br />
Reg. Sale<br />
Size Model # Price Price<br />
No. 1<br />
5 gal. PH893-2096 $102.44 $75.99<br />
No. 2<br />
1 gal. PH505-1987 20.10 14.99<br />
5 PH505-1988 81.98 65.99<br />
No. 3<br />
5 gal. PH328-1135 88.98 72.95<br />
No. 4<br />
1 gal. PH505-1989 20.10 14.99<br />
5 PH505-1990 82.98 72.00<br />
Cutting &<br />
Tapping Fluid<br />
• Performs extremely well<br />
on all metals, including<br />
aluminum, stainless steel,<br />
Inconel and titanium<br />
• May be used straight or<br />
as an additive to enhance<br />
inexpensive cutting oils<br />
Contains no<br />
1,1,1-Trichloroethane,<br />
methylene chloride, sulfur<br />
or chlorine — Safe<br />
for the ozone layer<br />
Performs<br />
Extremely<br />
Well On All<br />
Metals!<br />
Price Each<br />
Case<br />
Less Than Case<br />
Size Qty. Model # Case Qty.<br />
4 oz. Spout Top 24 PH319-3896 $2.53 $1.99<br />
16 oz. Aerosol 12 PH319-3897* 13.47 9.99<br />
1 pt. Can 12 PH891-4158 8.77 6.49<br />
1 gal. Can 2 PH505-1978 51.98 38.98<br />
5 gal. Pail 1 PH505-2032 149.95 —<br />
*No air shipment<br />
PHONE: 800-USE-ENCO (800-873-3626)<br />
INTERNET: use-enco.com<br />
57