SAVE - Enco

Measuring Tools
V-Block &
Clamp Set
Style A
SAVE
UP TO
26%
Easy, Secure Shopping
3 Pc. Quality Hardened Steel Square Set
Accuracy Class 2 with Straight Edge
Base and blades are accurately ground and lapped. Beam is grooved
at inner corner. Rockwell 55
• Set includes 3 1 ⁄8", 5" & 6 3 ⁄4" squares
Blade lengths are approximate.
Accuracy + L
0.0008" 10,000
Where L = Length of Blade in Inches
SAVE
34%
Sale Price
Model # PH712-0918
$
29 95
Regular Price: $45.98
Made of hardened and ground tool steel.
• 1 ⁄2" Capacity
• 1 1 ⁄2" sq. x 2"L
Set consists of 2 blocks and 1 clamp.
Sale Price
Model # PH422-3390
$
29 95
Regular Price: $40.93
Thread Detective
Precise Nut & Bolt
Thread Identifier
• Used for inch nut and bolt sizes
• Thread sizes are permanently
stamped onto each gauge
Includes:
#6, #8, #10, 1 ⁄4 thru
1 ⁄2" gauges; metric sizes
include M4 thru M12.
Digital Protractor
& Levels
• Instant LCD of level, tilt, true
vertical or any angle in between
• Meas. range: 360° (90° x 4)
• With 9 volt battery
• (2) 3V lithium batteries included
Spindle Square
A simple solution to squaring your machine.
Just zero indicators on flat surface, install in
milling machine spindle, bring the spindle
down to the table and adjust the head until
both indicators read the same.
SAVE
UP TO
37%
Mfr’s Sale
Description Res. Acc. Model # List Price
Protractor ±.1° .1° PH317-0585* $157.26 $98.95
Pro 360 Level ±.1 .1 PH240-0341 239.98 178.00
Pro 3600 w/SPD Level ±.01 .05 PH240-0343 372.85 308.95
* No air shipment
SAVE
19%
• 1 ⁄2" shank • Fully assembled with indicators mounted and ready for
use • No more tramming or split reading, compensating for loose,
worn gears or mirrors
• Can also be used with a sine bar or protractor to set angle
• Heat-treated, ground steel for durability and accuracy
• Furnished in a fitted case
V-Blocks
As Low As
$
15 95
• Close-grained cast iron
• Squareness and parallelism
of V-grooves within .0012"
• 90° V is centered, square with
the sides and parallel to the base
• Supplied in numbered pairs
SAVE
UP TO
31%
6 Pc. Telescoping Hole Gage Set
5⁄16-6" Measuring Range
Sale Price
Model # PH319-3127
$
158 95
Mfr’s List: $197.96
Overall V Wt. Price Per Pair
W x L x H Width Lbs. Model # Reg. Sale
1 5 ⁄16 x 3 x 2 3 ⁄8" 1 3 ⁄4" 3.2 PH990-3317 $21.00 $15.95
1 9 ⁄16 x 4 x 2 9 ⁄16 2 3 ⁄16 5.5 PH990-3318 29.38 21.95
2 x 5 x 3 1 ⁄8 2 7 ⁄16 7.4 PH990-3319 37.78 25.95
2 7 ⁄16 x 6 x 3 1 ⁄2 3 1 ⁄16 14.2 PH990-3320 54.58 39.95
4 x 8 x 5 1 ⁄2 4 1 ⁄2 40 PH990-3321 117.58 92.95
52
Sale Price
Model # PH404-0002
$
23 95
Regular Price: $35.97
• Constant spring tension for uniform contact pressure
• Plunger on gage expands in hole to be measured, locks in
place and gage is removed from the hole. Final hole size
is obtained by measuring over contacts with a micrometer
• Satin-chrome finish • Rigid handle
with self-centering feature
• Contact points are hardened tool
steel and precision ground on the
end measuring radius
• Supplied in fitted case
Sale Price
Model # PH615-6610
$
15 95
Regular Price: $29.38
The RIGHT TOOL at the RIGHT PRICE
SAVE
45%