SAVE - Enco

you select the Right Machine!
3-in-1 Mill-Lathe-Drill Press Machine
• Precision bearings ensure high spindle concentricity
• Milling unit has swivel head
• 7 turning speeds: 160-1360 rpm • 3 MT spindle taper • ±180° swiveling angle
of headstock for milling and drilling • 3 ⁄4 hp, 110v, 1 ph., 1400 rpm motor
Includes: 4" 3-jaw chuck, 1 ⁄2" drill chuck with arbor, 2 dead centers, 4-way tool post, 5" backplate,
9 1 ⁄2" faceplate, 3 MT chuck arbor, drill chuck arbor, drawbar and change gears.
Specifications PH328-1308 PH328-1309 PH328-1310
TURNING
Swing Over Bed: 16 1 ⁄2" 16 1 ⁄2" 16 1 ⁄2"
Distance Between Centers: 15 3 ⁄4" 19 3 ⁄4" 31 1 ⁄2"
Max. Longitudinal Travel: 15" 17 3 ⁄8" 29 1 ⁄8"
Max. Cross Travel: 4 3 ⁄4" 7 7 ⁄8" 7 7 ⁄8"
Spindle Taper: 3 MT 4 MT 4 MT
Spindle Hole: 3 ⁄4" 1 1 ⁄8" 1 1 ⁄8"
Metric Threads: (8) .75-3mm (12) .75-6mm (12) .75-6mm
Inch Threads: (31) 8-20 tpi (36) 4-120 tpi (36) 4-120 tpi
Longitudinal Range of
Automatic Feeding: .002-.007" .002-.014" .002-.014"
MILLING & DRILLING
Table Size: 7 7 ⁄8L x 5 7 ⁄8"W 18 3 ⁄4L x 6 5 ⁄16"W 18 3 ⁄4L x 6 5 ⁄16"W
Spindle Travel: 3 21 ⁄64" 4 21 ⁄64" 4 21 ⁄64"
Spindle Speeds: (14) 117-1300 rpm (16) 120-3000 rpm (16) 120-3000 rpm
Drilling Capacity: 19 ⁄32" 7 ⁄8" 7 ⁄8"
End Mill Capacity: 3 ⁄4" 1 1 ⁄8" 1 1 ⁄8"
Face Mill Capacity: 2 1 ⁄2" 3 1 ⁄8" 3 1 ⁄8"
Machine Dimensions: 38.2W x 23D x 38"H 57.5W x 23D x 38"H 69.25W x 23D x 38"H
Approx. Wt.: 400 lbs. 540 lbs. 606 lbs.
Reg. Price $1,499.98 $1,999.98 $2,499.98
Sale Price $1,119.00 $1,849.98 $2,199.98
Lathes
SAVE
25%
Sale Price
Model # PH328-1308
$
1,119
Regular Price: $1,499.98
1-YEAR LIMITED
WARRANTY
• Headstock with tapered roller bearings
• Hardened and ground ways
• Reversing switch
• Inch dials
• Reinforced cross ribs
9" x 20" Bench Lathes
Quick-change gearbox for easier threading
Wt. Reg. Sale
Lbs. Model # Price Price
Bench Lathe Only
250 PH893-1273 $1,199.98 $969.95
Bench Lathe with Cabinet Stand
328 PH308-0338 1,397.98 1,229.95
1-YEAR LIMITED
WARRANTY
SAVE
UP TO $
230
Starting At
$
929 95
Standard Equipment
• 4" 3-Jaw Chuck • 5" 4-Jaw Chuck • Steady Rest
• Follow Rest • Metric Change Gears • 7" Faceplate
• 2 MT Dead Center • Threading Dial • Toolbox with Tools
• 1⁄2" Capacity, 4-Way Tool Post
Specifications
Swing Over Bed: 9" Swing Over Cross Slide: 5 1 ⁄4"
Distance Between Centers: 20" Carriage Travel: 16" longitudinal, 4 1 ⁄2" cross
2 Longitudinal Feeds: .005, .007" 27 Inch Threads: 8-56 tpi
11 Metric Threads: .5-3mm Tailstock Spindle Travel: 1.57" (40mm)
Compound Travel: 2" Tailstock Taper: 2 MT
Spindle Taper: 3 MT Spindle Bore Dia.: .787" (20mm)
Motor & Electrics: 3 ⁄4 hp, 110v*, 1 ph. 6 Spindle Speeds: 130-2000 rpm
Machine Dimensions: 38L x 18 1 ⁄2W x 16"H Spindle Nose Mounting: 1 1 ⁄2-8"
*Lathe is prewired for 110v, but can be wired for 220v
PHONE: 800-USE-ENCO (800-873-3626) INTERNET: use-enco.com 15