2009 product guide - Irrigation Direct

2 0 0 9 P R O D U C T G U I D E
tel: 877-436-6922 (toll free)
fax: 877-433-2948 (toll free)
www.irrigationdirect.com
©2009 Irrigation Direct

Modular Controllers
Features & Benefits:
D I R E C T M O D U L A R C O N T R O L L E R S
Go Online to Order: www.irrigationdirect.com
• Three programs (A,B,C) with multiple start times
• 4 start times per program - excellent for
repeat scheduling
• Up to 8 hours of run time per station
• 365-day calendar for leap year intelligence, true
odd / even day watering & daylight savings feature
(Patent Pending)
• Water budgeting & seasonal adjustment - adjust
zones from 10% to 150%
• Easy to read seasonal adjustment with incremental
bars on LCD display
• Programmable-event-day-off allows specific day(s)
to always off
• Rain / weather sensor bypass switch on front panel allows to
override active sensor for maintenance or manual watering
$
Starting at only
59 00
VALUE PRICING
DMC-6 Direct
Module Controller
Outdoor 6 Stations
DMC-6i Direct
Module Controller
Indoor 6 Stations
3 to 29
30 to 149
150 or more
$69.00/unit $64.00/unit $59.00/unit
$59.00/unit $54.00/unit $49.00/unit
*Mix & Match Pricing available on DMC’s automatically on our website
VALUE PRICING
DM-3 DMC
Expansion
Module
3 to 299
$14.00/unit
300 or more
$11.00/unit
Additional Features & Benefits:
1
Instruction Manual Holder Inside Door
of Controller
• Reduces call-backs, since spring-loaded design keeps the
manual with the controller
• Pencil and holder for easy recording of programs also
included (Patent Pending)
2
3
5 6
Tabs on Door and Cabinet Make
Opening Easy
• No strain on wall mounting
1
4
3
4
Removable Face Panel for Easy Job Site or
In-Home Programming
• Requires 9-volt battery — Irrigation Direct includes it!
• Easy-to-use face panel hinge design, easy to reconnect
Large LCD Screen Makes it Easy to See
while Programming
5
Easy Access Doors On Circuit Board
to Change Lithium & 9-Volt Alkaline
Batteries
2
6
Excellent Surge Protection for
Primary and Secondary Power
Hot-Swappable Modules
3
Expands to 15 Stations
Using Cost-Effective
3-Station Modules
Base Model Comes
with 6 Stations

Direct Flow Valves
Features & Benefits:
D I R E C T F L O W V A L V E S
Go Online to Order: www.irrigationdirect.com
1
Non-Rising Flow Control Stem
• Easy to access, non-rising stem
• Clearly marked water volume adjustments
• Flow control can be completely shut
off if necessary
• No special tools required
2
3
Strong Four-Bolt Cover Design
• Strongest design available on market with
stainless steel cover bolts in brass inserts
• Four bolt-design instead of multiple screws
• No need to worry about jar top threads stripping
due to sand and dirt
Reverse Flow Diaphragm Design
• Balanced pressure on the diaphragm means
it’s longer-lasting
• Won’t fail in open position
• Self-cleaning dual diaphragm ports won’t clog
VALUE PRICING
DFV-100 Direct
Flow Valve 1" FNPT
DFV-075 Direct
Flow Valve 3/4" FNPT
DFV-100SS
1" Slip x Slip Valve
with flow control
6
10 to 99
$9.95/unit
$9.95/unit
$9.95/unit
100 to 499
$9.00/unit
$9.00/unit
$9.00/unit
500 or more
$8.10/unit
$8.10/unit
$8.10/unit
*Mix & Match Pricing available on DFV Valves automatically on our website
Unique Design Diaphragm: Providing flexibility for all your watering needs.
Irrigation Direct’s DFV Series valves are perfect for just about any volume
irrigation system. With an efficient reverse flow design that works at only
1GPH and will operate at pressures as low as 10 PSI, DFV valves are excellent
for drip irrigation systems. However, it also performs extremely well
for high pressure and high flow systems, up to 150 PSI — and any pressure
range in between. Irrigation Direct’s high-performance valves are the
ideal solution for any residential or commercial application.
4
5
6
Proven Cone-Shaped Diaphragm
Base Design
• Diaphragm base eliminates water hammer
• Shock cone interrupts water flow more
gradually than most diaphragms
Simple Manual Bleed Design
• Easy to access manual bleed lever with clearly
marked on/off switch
• Internal bleed design means no water in
the valve box
• No twisting solenoids or bleed
screws required
• No special tools required
5
High-Quality Industry
Standard Solenoid
• Industry-standard 3/4"-20 threaded solenoid allows for
many choices in service replacement
• Made with high-quality non-corrosive stainless
steel internal components
• Coil is encapsulated in Epoxy for maximum
corrosion protection
• Efficiently designed coil allows for low power consumption
• Long 20" 18-gauge wire for easy installation
$
Starting at only
9 95
3
4
1
2
DFV Product Specifications
DFV Models
• DFV-75 3/4" FNPT Direct Flow Valve with Flow Control
• DFV-100 1" FNPT Direct Flow Valve with Flow Control
• DFV-100SS 1" Slip x Slip for PVC Pipe Direct Flow Valve
with Flow Control
DFV Operating Range
• Pressure: 10 to 150 PSI
• DFV-075 Flow: 0.2 to 22 GPM
• DFV-100T Flow: 0.2 to 40 GPM
• DFV-100SS Flow: 0.2 to 40 GPM
• Water Temperature: Up to 110ºF (43ºC)
• Ambient Air Temperature: Up to 125ºF (52ºC)
DFV Electrical Specs
• 24 VAC 50/60 cycle solenoid power requirement
• Inrush Current: 0.35 Amp (8.4 VA)
• Holding Current: 0.23 Amp (5.5 VA)
• Solenoid Coil Resistance: 24 Ohms
DFV Dimensions
• Height: 4 3/8" (11.1 cm)
• Length: 5" (12.7 cm)
• Width: 3 1/16" (8.1 cm)

Sprinkler Parts
S p r i n k l e r P a r t s & A c c e s s o r i e s
Go Online to Order: www.irrigationdirect.com
DCOR5060 Direct 1/2" x 6" Poly Cut-off Riser
• Cost Effective Riser Solution • Stock Less Parts
1 – 49.............. $0.13 50 – 999 .......... $0.11 1,000 – 9,999.... $0.09 10,000 or more.$0.075
DCOR7560 Direct 3/4" x 6" Poly Cut-off Riser
DCOR7550 Direct 3/4" x 1/2" x 6" Poly Cut-off Riser
DCOR5070MF Direct 1/2" x 7" Poly Cut-off Riser Extender MIP x FIP
• Cost Effective Riser Solution • Stock Less Parts
1 – 49.............. $0.32 50 – 499........... $0.28 500 – 4,999....... $0.22 5,000 or more.... $0.19
DS5060 Direct 1/2" x 6" Swing Assembly
• Pre-Assembled, Super Labor Saver • Easily Adjust Head to Grade
• Maximum Flow: 8 GPM
• Operating Pressure: 80 PSI Maximum
Product Number Product Description 1 - 49 50 - 199 200 - 999 1,000 or more
DS5060 Direct 1/2" x 6" Swing Assembly $0.85 $0.75 $0.60 $0.55
DS507512 Direct 1/2" x 3/4" x 12" Swing Assembly $1.10 $0.91 $0.76 $0.71
DS5012 Direct 1/2" x 12" Swing Assembly $0.99 $0.85 $0.70 $0.65
DS50L Direct Swing 1/2" Spiral 90
• Made with Hard Acetal Plastic for Sharper Grooves
• Barb Design means no Glue or Tools
• Operating Range: Up to 80 PSI
• For .490" I.D. Swing Pipe only. Not for Drip Irrigation.
1 – 49.............. $0.20 50 – 199........... $0.14 200 – 1,499....... $0.10 1,500 or more.. $0.085
DS75L Direct Swing 3/4" Spiral 90
• Made with Hard Acetal Plastic for Sharper Grooves
• Barb Design means no Glue or Tools
• Operating Range: Up to 80 PSI
• For .490" I.D. Swing Pipe only. Not for Drip Irrigation.
Product Number Product Description 1 - 49 50 - 199 200 - 999 1,000 or more
DS75L Direct Swing 3/4" Spiral 90 $0.20 $0.15 $0.11 $0.095
DS50C Direct Swing 1/2" Spiral Coupling $0.23 $0.16 $0.13 $0.11
DS50T Direct Swing 1/2" Spiral Tee $0.65 $0.50 $0.40 $0.33
DS50MA Direct Swing 1/2" Male Adapter $0.25 $0.18 $0.14 $0.12
DS75MA Direct Swing 3/4" Male Adapter $0.26 $0.19 $0.15 $0.13
DSP100 Direct Swing Pipe 100' Roll
• High Quality Polyethylene
• Easy to Flex due to Additives
1-99.......$18.50/roll 100+..... $16.50/roll
* Due to fluctuations in raw material cost all pricing is subject to change without notice, for the most up to date
pricing refer to our website: www.IrrigationDirect.com
DMAR75 Direct 3/4" Marlex 90
• Heavy Duty Self-Lubricating Design
• High Quality Cost Effective Solution
1 – 49.............. $0.40 50 – 349........... $0.30 350 – 999......... $0.24 1,000 or more.... $0.18
DMAR100 Direct 1" Marlex 90
• Heavy Duty Self-Lubricating Design
• High Quality Cost Effective Solution
1 – 24.............. $0.90 25 – 99............ $0.70 100 – 499......... $0.50 500 or more...... $0.35
DSSA Direct Spray Shrub Adapter 1/2" NPT x Female Nozzle (RB Type)
• Accepts all Female Threaded Nozzles
• ABS Plastic with Maximum UV Protection
1 – 49.............. $0.40 50 – 249........... $0.25 250 – 1,499....... $0.20 1,500 or more.... $0.15
Mix and match pricing available on Direct Spray Adjustable Nozzles!
DSAN-8 Direct Spray Adjustable Arc Nozzle - 8' Radius – Green
DSAN-10 Direct Spray Adjustable Arc Nozzle - 10' Radius – Blue
DSAN-12 Direct Spray Adjustable Arc Nozzle - 12' Radius – Brown
DSAN-15 Direct Spray Adjustable Arc Nozzle - 15' Radius – Black
DSAN-17 Direct Spray Adjustable Arc Nozzle - 17' Radius – Gray
• Female Threaded Nozzles (RB Style)
• Adjustable Arc from 0 to 360 Degrees
• Right Edge of Arc Easily Marked on top of Nozzle
• Much Easier to Adjust Arc then Most other Brands
• View our Website for more Detailed Performance Specifications
• You can not Beat this Performance at this Price!
1 – 24.............. $0.79 25 – 249........... $0.69 250 – 999......... $0.60 1,000 or more.... $0.52
DS-AB Direct Adjustable Flood Bubbler ½” FPT
• Popular design for flowers, shrubs & trees
• Adjustable flow rate & radius
• Inlet: ½” Female Pipe Thread
• Recommended Operating Pressure: 20 – 40 PSI
• Flow Rate: 0 – 3.3 GPM
• Radius: 0 – 2’
• Made with Heavy Duty ABS plastic
• Screen included
1 – 24.............. $0.80 25 – 99............ $0.75 100 – 499......... $0.70 500................. $0.60
DMAR50 Direct 1/2" Marlex 90
• Heavy Duty Self-Lubricating Design
• High Quality Cost Effective Solution
1 – 49.............. $0.20 50 – 499........... $0.15 500 – 2,499....... $0.12 2,500 or more.... $0.09

Sprinkler Parts cont’d
& Drip Irrigation
S p r i n k l e r P a r t s & A c c e s s o r i e s
WATER SOURCE CONNECTION ITEMS
Go Online to Order: www.irrigationdirect.com
DS-PCB-25 Direct Pressure Compensating Full Circle Bubbler .25 GPM
DS-PCB-50 Direct Pressure Compensating Full Circle Bubbler .50 GPM
DS-PCB-75 Direct Pressure Compensating Full Circle Bubbler .75 GPM
DS-PCB-10 Direct Pressure Compensating Full Circle Bubbler 1.0 GPM
DS-PCB-20 Direct Pressure Compensating Full Circle Bubbler 2.0 GPM
• Built for trees, shrubs & flower areas
• Pressure compensating for consistent output
• Operating Pressure: 20 – 90 PSI
• Flow Rate: .25 – 2.0 GPM
• Spacing: 1’ to 3’
• Inlet: ½” Female Pipe Thread
• Made with Heavy Duty ABS plastic
• Screen included
1 – 24.............. $2.50 25 – 99............ $2.00 100 – 499......... $1.90 500 or more...... $1.70
DS-PCSB-EST Direct Pressure Compensating Spider Bubbler – End Strip
DS-PCSB-CST Direct Pressure Compensating Spider Bubbler – Center Strip
DS-PCSB-H Direct Pressure Compensating Spider Bubbler – Half Circle
DS-PCSB-F Direct Pressure Compensating Spider Bubbler – Full Circle
• Proven spider design for excellent performance
• Operating Pressure: 20 – 50 PSI
• Inlet: ½” Female Pipe Thread
• Made with Heavy Duty ABS plastic
• Screen included
1 – 24.............. $0.90 25 – 99............ $0.85 100 – 499......... $0.80 500 or more...... $0.70
Product #
DS-PCB-25
DS-PCB-50
DS-PCB-75
DS-PCB-10
DS-PCB-20
Product #
DS-PCSB-EST
DS-PCSB-CST
DS-PCSB-H
DS-PCSB-F
Pressure
PSI
Radius
ft
Flow
GPM
20 0.10 0.20
25 0.10 0.23
30 0.10 0.25
35 0.10 0.25
20 0.10 0.45
25 0.10 0.47
30 0.10 0.50
35 0.10 0.50
20 0.60 0.70
25 0.80 0.73
30 1.00 0.75
35 1.00 0.75
20 0.80 0.80
25 0.90 0.90
30 1.00 1.00
35 1.00 1.00
20 0.80 1.80
25 0.90 1.90
30 1.00 2.00
35 1.00 2.00
Pressure
PSI
Radius
ft
Flow
GPM
20 1.30 0.20
25 1.50 0.23
30 2.00 0.25
35 2.00 0.25
20 1.30 0.40
25 1.50 0.46
30 2.00 0.50
35 2.00 0.50
20 1.30 0.40
25 1.50 0.46
30 2.00 0.50
35 2.00 0.50
20 1.30 0.80
25 1.50 0.90
30 2.00 1.00
35 2.00 1.00
DD-PR20LF-75 Pressure Regulator 3/4" FPT x MPT- 20 PSI Low Flow .1 - 8 GPM
DD-PR30LF-75 Pressure Regulator 3/4" FPT x MPT- 30 PSI Low Flow .1 - 8 GPM
• Inlet: 3/4" FPT (Female Pipe Thread)
• Outlet: 3/4" MPT (Male Pipe Thread)
• Flow Rate Range: .1 - 8 GPM (Gallons Per Minute)
• Maximum Operating Inlet Pressure: 100 PSI
• Heavy Duty ABS Plastic with Maximum UV & Oxidizer Protection
• Recommended to be installed after a pipe threaded filter DD-YS75
1 - 5................ $3.75 6 - 39............... $3.25 40 or more........ $2.75
DD-CFP700 Direct Drip 3/4" FPT Swivel Pipe w/ washer x .700" Drip Hose
• Used to connect .600" ID x .700" Drip Hose to a 3/4" FPT (Female Pipe Thread) Connection
• Inlet: 3/4" Female Pipe Thread
• Outlet: .700" OD Compression Fitting for DD-DH700 Drip Hose
• Washer Included DD-HW
• Used to connect on outlet side of a male pipe threaded pressure
regulators DD-PR20LF-75 & DD-PR30LF-75
• Used to connect on outlet side of a pipe threaded Y filter DD-YS75
1 - 9................ $0.65 10-24............... $0.50 25-99............... $0.45 100+............... $0.40
DD-DZ7520LF Direct Drip Zone Kits
• Convenient Pre-Assembled Drip Zone Kits
• Includes: 1 – DFV Electric Valve, 1 – Pressure Regulator & 1 – Y Filter
• Unit Length: 14"
Product Number Product Description 1 - 5 6 - 59 60 or more
DD-DZ7520LF 3/4" 20 PSI Low Flow .1 - 8 GPM $22.00 $17.70 $15.85
DD-DZ7530LF 3/4" 30 PSI Low Flow .1 - 8 GPM $22.00 $17.70 $15.85
DD-YS75 Direct Drip Y Filter 3/4" MNPT w/ 150 Mesh Filter
• Stainless Steel 150 Mesh Screen
• Heavy Duty Plastic with Maximum UV & Oxidizer Protection
• Operating Pressure: Up to 120 PSI
• Recommended Flow Rate: Up to 11 GPM (gallons per minute) or 660 GPH
• MPT x MPT (Male Pipe Thread)
• Not for use with Hose Threaded Products
END SPRINKLER
PARTS & ACCESSORIES
DD-HEDT Direct Drip Battery Operated Hose End Timer - Solid State
• Up to 9 Start Timers Per Day
• Requires 2 - AA Batteries (not included)
• Water Budget Capability
• Excellent for Drip Irrigation
• 1 to 255 Minute Run Time
• Comes with Rubber Boot Cover for Maximum Protection
• Connects to 3/4" Hose Bibb
• Inlet: 3/4" FHT (Female Hose Thread)
• Outlet: 3/4" MHT (Male Hose Thread)
Product Number Product Description 1 - 5 6 - 39 40 or more
DD-YS75 Direct Drip Y Filter 3/4" MNPT w/ 150 Mesh Filter $6.50 $4.25 $3.60
DD-YS100 Direct Drip Y Filter 1" MNPT w/ 150 Mesh Filter $7.50 $4.75 $3.90
DD-YSRS Replacement Filter 150 Mesh SS for DD-YS75, DD-YS100 & DD-YS75HFM $2.00
DD-YSOK O-Ring Kit (3) for DD-YS75 & DD-YS100 $0.50
1 – 5.............. $29.90 6-29.............. $26.90 30 or more...... $24.90

Drip Irrigation
WATER SOURCE CONNECTION ITEMS
Go Online to Order: www.irrigationdirect.com
DD-HVB Direct Drip Hose Vacuum Breaker 3/4" FHT x 3/4" MHT w/ Hose Washer
• Designed to help prevent water from back flowing into water source
• Should not be installed under static (constant) water pressure
• Install after manual or electric control valve
• Inlet: 3/4" FHT (Female Hose Thread)
• Outlet: 3/4" MHT (Male Hose Thread)
• Hose Washer Included DD-HW
• Maximum Inlet Operating Pressure: 100 PSI
1 – 24.............. $2.00 25-99............... $1.75 100+............... $1.50
DD-HIF75 Direct Drip 3/4" FHT x 3/4" MHT Inline Filter w/ 120 Mesh Screen
• Low Cost Inline Filter
• 120 Mesh Poly Screen
• Operating Pressure: Up to 80 PSI
• Maximum Flow Rate: 8 GPM
• Inlet: ¾” FHT (Female Hose Thread)
• Outlet: ¾” MHT (Male Hose Thread)
• Hose Washer Included
1 – 9................ $3.50 10-24............... $2.90 25-199............. $2.50 200+............... $2.25
Product Number Product Description Price
DD-HIFRS Replacement Filter 120 Mesh Poly for DD-HIF75 $1.50
DD-YS75HFM Direct Drip Y Filter Hose Threaded ¾” FHT x ¾” MHT w/ 150 Mesh Filter
• Stainless Steel 150 Mesh Screen
• Heavy Duty Plastic with Maximum UV & Oxidizer Protection
• Operating Pressure: Up to 120 PSI
• Recommended Flow Rate: Up to 11 GPM (gallons per minute) or 660 GPH
• Inlet: ¾” FHT (Female Hose Thread)
• Outlet ¾” MHT (Male Hose Thread)
• For use with Hose Threaded Products only, not to be used with Pipe Threaded Products
• Replacement screen for this product is DD-YSRS and o-ring kit is DD-YSOK
1 – 5................ $9.50 6-39................ $7.25 40+................. $6.60
DD-HPR-20 Pressure Regulator - 20 PSI 3/4" FHT x MHT Low Flow .1 - 8 GPM
DD-HPR-30 Pressure Regulator - 30 PSI 3/4" FHT x MHT Low Flow .1 - 8 GPM
• Inlet: 3/4" FHT (Female Hose Thread)
• Outlet: 3/4" MHT (Male Hose Thread)
• Flow Rate Range: .1 - 8 GPM (Gallons Per Minute)
• Maximum Operating Inlet Pressure: 100 PSI
• Heavy Duty ABS Plastic with Maximum UV & Oxidizer Protection
• Recommended to be installed after a filter DD-HIF75 or DD-YSHFM
1 – 5................ $3.75 6-39................ $3.25 40+................. $2.75
DD-CHS700 Direct Drip 3/4" FHT Swivel Hose Adapter w/ washer - 700 Tubing
• Inlet: 3/4" FHT (Female Hose Thread)
• Outlet: Compression Fit for .600" I.D. (inside diameter) x .700" O.D.
(outside diameter) Drip Hose Main Line DD-DH700
• This is how you connect Drip Hose to your Hose Bibb fittings
• This part swivels for easy installation
• Hose Washer Included DD-HW
• Maximum Operating Pressure: 60 PSI
1 – 9................ $0.65 10-24............... $0.50 25-99............... $0.45 100+............... $0.40
DD-CHS250 Direct Drip ¾” FHT Swivel x ¼” (250) Barb Hose Adapter w/ washer
• Inlet: 3/4" FHT (Female Hose Thread)
• Outlet: 1/4" (250) Barb which will connect to our 1/4" Drip Hose
DD-DH250-100 or DD-DH250V-100
• Swivel Design makes it really easy to install
• Hose Washer DD-HW included
• The following filters will work with this part: DD-HFW Hose Filter Washer
or DD-HIF75 Hose Inline Filter 120 Mesh
1 – 9................ $0.75 10-24............... $0.60 25-99............... $0.50 100+............... $0.40
DD-BV75 Direct Drip 3/4" FHT x 3/4" MHT Ball Valve
• Hose Threaded Ball Valve for turning water on and off
• Inlet: 3/4" FHT (Female Hose Thread)
• Outlet: 3/4" MHT (Male Hose Thread)
• Hose Washer DD-HW included
• Maximum Operating Pressure: 60 PSI
1 – 9................ $1.50 10-24............... $1.20 25-99............... $1.10 100+............... $0.90
DD-YBV75 Direct Drip 3/4" FHT x 3/4" MHT Y Ball Valve (2 outlets)
• Y Ball Valve allows you to install a Drip Irrigation System on your hose
bibb and still use your garden hose
• Inlet: 3/4" FHT (Female Hose Thread)
• 2 Outlets: 3/4" MHT (Male Hose Thread)
• Individual shut off valve for each outlet
• Hose Washer DD-HW included
• Maximum Operating Pressure: 60 PSI
1 – 9................ $1.90 10-24............... $1.60 25-99............... $1.25 100+............... $1.10
DD-HEC Direct Drip 3/4" FHT Hose End Cap w/ washer
• 3/4" FHT (Female Hose Thread) Cap
• Comes with Hose Washer (DD-HW)
• Used to cap off 3/4" MHT (Male Hose Fitting)
1 – 9............ $0.30 10-24........... $0.25 25-99........... $0.16 100+............ $0.14

Drip Irrigation
WATER SOURCE CONNECTION ITEMS
DRIP EMITTERS & BUBBLERS
Go Online to Order: www.irrigationdirect.com
DD-HFW Direct Drip 3/4" Hose Filter 60 Mesh Screen
• For Use with Hose Fittings
• All in One Washer & Screen
• 60 Mesh Stainless Steel Screen
• Designed to be installed on inlet FHT (Female Hose Thread) side of any hose threaded item
1 – 9................ $0.50 10-24............... $0.40 25-99............... $0.35 100+............... $0.30
DD-HW Direct Drip 3/4" Hose Washer
1 – 24.............. $0.25 25-99............... $0.20 100+............... $0.15
Adapter Fittings
Product Number Product Description 1 - 24 25 or more
DD-FH2 Direct Drip ¾” FHT* Swivel w/ washer x ¾” Female Slip Adapter $1.50 $1.35
DD-FH3 Direct Drip ¾” FHT* Swivel w/ washer x ½” MPT* Adapter $1.50 $1.35
DD-FH4 Direct Drip ¾” FHT* Swivel w/ washer x ¾” MPT* Adapter $1.50 $1.35
DD-FH6 Direct Drip ¾” FHT* Swivel w/ washer x ¾” FPT* Adapter $1.50 $1.35
DD-FH7 Direct Drip ¾” FHT* Swivel w/ washer x ¾” FHT* Adapter $1.50 $1.35
DD-MH2 Direct Drip ¾” MHT* x ½” FPT* Adapter $1.10 $1.00
DD-MH6 Direct Drip ¾ MHT* x ¾” MPT* Adapter $0.50 $0.45
DD-MH7 Direct Drip ¾” FPT* x ¾” MHT* Adapter $1.00 $0.90
DD-MH8 Direct Drip ¾” MHT* x ½” Female Slip Elbow Adapter - Black $1.20 $1.00
DD-MH9 Direct Drip ¾” MHT* x ¾” Female Slip Elbow Adapter - Black $1.20 $1.00
DD-MH10 Direct Drip ¾” MHT* x ½” FPT* Elbow Adapter - Black $1.20 $1.00
*FHT = Female Hose Thread
MHT = Male Hose Thread
FPT = Female Pipe Thread
MPT = Male Pipe Thread
END WATER SOURCE CONNECTION ITEMS
DD-TAE10 (BLACK) Direct Drip 1 GPH (4 LPH) Non-Compensating Take Apart Flag Emitter
DD-TAE20 (BLUE) Direct Drip 2 GPH (8 LPH) Non-Compensating Take Apart Flag Emitter
DD-TAE40 (GREEN) Direct Drip 4 GPH (16 LPH) Non-Compensating Take Apart Flag Emitter
• Has 1/4" Inlet & Outlet, for Mainline or Distribution Tubing Installation
• Easy to Take Apart & Clean
• Non-Pressure Compensating Emitter, must Operate at 15 – 20 PSI
• Very Economical Popular Design
1 – 99.............. $0.13 100 – 999......... $0.10 1,000 – 2,999.... $0.09 3,000 or more.. $0.075
DD-TTE5 Direct Drip 1/2 GPH Non Pressure Compensating Emitter - Turbo Style
DD-TTE10 Direct Drip 1 GPH Non Pressure Compensating Emitter - Turbo Style
DD-TTE20 Direct Drip 2 GPH Non Pressure Compensating Emitter - Turbo Style
• Non-Pressure Compensating Emitter, must Operate at 15 – 20 PSI
• Very Economical Solution 1/4" Barb
• Removable Top & Labyrinth for Easy Cleaning
1 – 99.............. $0.13 100 – 999......... $0.10 1,000 – 2,999.... $0.09 3,000 or more.. $0.075
DD-SR180B Direct Drip Adjustable Stream Bubbler 1/2 Circle (180) – Barb
DD-SR360B Direct Drip Adjustable Stream Bubbler Full Circle (360) – Barb
• Replacement for Shrubbler Style Emitter
• Operating Pressure: 10 to 30 PSI
• Minimal Filtration Required
• Flow Rate: 0 to 10 GPH
• DD-SR360B - Adjustable Diameter: 6" to 3'
• DD-SR180B – Adjustable Radius: 3” to 18”
• Use DD-HP250 Hole Punch for making 1/4" hole in Drip Hose
1 –24............... $0.30 25 – 99............ $0.25 100 – 999......... $0.19 1,000 or more.... $0.16
DD-PCE5 Direct Drip 1/2 GPH Pressure Compensating Emitter
DD-PCE10 Direct Drip 1 GPH Pressure Compensating Emitter
DD-PCE20 Direct Drip 2 GPH Pressure Compensating Emitter
• Self Flushing & Cleaning Pressure Compensating Emitter
• Extra Large Water Pathways, 1/4" Barb Inlet
• Consistent Flow Rates at 14.58 to 58 PSI
• Two Piece Casing & Double Labyrinth Design
1 – 99.............. $0.22 100 – 999......... $0.18 1,000 – 2,999.... $0.17 3,000 or more.... $0.16
DD-TC5 (Yellow) Direct Drip 1/2 GPH Pressure Compensating Emitter - Turbo Style
DD-TC10 (BLACK) Direct Drip 1 GPH Pressure Compensating Emitter - Turbo Style
DD-TC20 (BLUE) Direct Drip 2 GPH Pressure Compensating Emitter - Turbo Style
• Removable Top for Easy Cleaning
• Affordable Pressure Compensating Emitter, 1/4" Barb
• Recommended Operating Pressure 10 – 40 PSI
• Large Diaphragm Reduces Clogging
DD-SR360T Direct Drip Adjustable Stream Bubbler Full Circle (360) - 10-32 Thread
• Replacement for Shrubbler Style Emitter
• Operating Pressure: 10 to 30 PSI
• Minimal Filtration Required
• Flow Rate: 0 to 10 GPH
• DD-SR360T – Adjustable 6” to 3’ Diameter
• DD-SR180T – Adjustable 3” to 18” Radius
• 10-32 Thread Allows for Installation on our Micro Stake Assemblies & Threaded
Riser Stakes (DD-MJSA12, DD-MJSA20, DD-MJRE8, DD-MJRE12 & DD-MJRE18)
located in our Micro Jets & Sprayers section.
Product Number Product Description 1 - 24 25 - 99 100 - 999 1,000 or more
DD-SR360T Direct Drip Adjustable Stream Bubbler Full Circle (360) - 10-32 Thread $0.30 $0.25 $0.19 $0.16
DD-SR180T Direct Drip Adjustable Stream Bubbler 1/2 Circle (180) - 10-32 Thread $0.30 $0.25 $0.19 $0.16
1 – 99.............. $0.16 100 – 999......... $0.12 1,000 – 2,999.... $0.11 3,000 or more.... $0.10

Drip Irrigation
DRIP EMITTERS & BUBBLERS
DRIP EMITTER TUBING
Go Online to Order: www.irrigationdirect.com
DD-SR360S Direct Drip Adjustable Stream Bubbler Full Circle (360) - 6" Spike
• Replacement for Shrubbler Style Emitter
• Operating Pressure: 10 to 30 PSI
• Minimal Filtration Required
• Flow Rate: 0 to 10 GPH
• Comes with a Transfer Barb (Coupling)
• DD-SR360S - Adjustable Diameter: 6" to 3'
• DD-SR180S – Adjustable 3” to 18” Radius
• 1/4" Barb Connection (250 Tubing)
Product Number Product Description 1 - 24 25 - 99 100 - 399 400 or more
DD-SR360S Direct Drip Adjustable Stream Bubbler Full Circle (360) - 6" Spike $0.40 $0.35 $0.26 $0.23
DD-SR180S Direct Drip Adjustable Stream Bubbler 1/2 Circle (180) - 6" Spike $0.40 $0.35 $0.26 $0.23
DD-SM360B Direct Drip Adjustable Spectrum Spray Full Circle (360) – Barb
• Adjustable Umbrella Pattern Sprayer
• Replacement for Spectrum style sprayer
• Operating Pressure: 15 - 30 PSI
• Flow Rate: 0 - 24 GPH
• Adjustable up to 5.5' Diameter
• 1/4" Barb for easy installation
• Use DD-HP250 Hole Punch for making 1/4" hole in Drip Hose
1 – 24.............. $0.40 25 – 99............ $0.35 100 – 999......... $0.25 1,000 +............ $0.20
DD-SM360T Direct Drip Adjustable Spectrum Spray Full Circle (360) - 10-32 Thread
• Adjustable Umbrella Pattern Sprayer
• Replacement for Spectrum style sprayer
• Operating Pressure: 15 - 30 PSI
• Flow Rate: 0 - 24 GPH
• Sprays Up to 5.5' Diameter
• 10-32 Thread Allows for Installation on our Micro Stake Assemblies & Threaded
Riser Stakes (DD-MJSA12, DD-MJSA20, DD-MJRE8, DD-MJRE12 & DD-MJRE18)
located in our Micro Jets & Sprayers section.
1 – 24.............. $0.40 25 – 99............ $0.35 100 – 999......... $0.25 1,000 +............ $0.20
DD-PCBP-5 Direct Drip ½ GPH Pressure Compensating Emitter - ½” FPT x ¼” (250) Barb
DD-PCBP-10 Direct Drip 1 GPH Pressure Compensating Emitter - ½” FPT x ¼” (250) Barb
DD-PCBP-20 Direct Drip 2 GPH Pressure Compensating Emitter - ½” FPT x ¼” (250) Barb
• Great for converting existing sprinkler systems, easily threads onto existing ½” riser
• Inlet: ½” FPT (female pipe thread)
• Outlet: ¼” (250) barb
• Operating Pressure: 10 – 40 PSI
• Made with High Impact ABS plastic
1 – 24.............. $0.60 25 – 99............ $0.50 100 – 499......... $0.45 500 +............... $0.40
DD-6BP-6 Direct Drip 6 GPH (per outlet) Pressure Compensating - Bubbler – ½” FPT x 6 – ¼” (250) Outlets (Black)
DD-6BP-10 Direct Drip 10 GPH (per outlet) Pressure Compensating - Bubbler – ½” FPT x 6 – ¼” (250) Outlets (Red)
DD-6BP-20 Direct Drip 20 GPH (per outlet) Pressure Compensating - Bubbler – ½” FPT x 6 – ¼” (250) Outlets (Green)
• Great for converting existing sprinkler systems to drip irrigation products
• Adjustable from 1 to 6 - ¼” (250) outlets, comes with one outlet open
• Easily open additional outlets with wire cutter
• Operating Pressure: 10 – 40 PSI
• Screen Included
• Each outlet will put out specified GPH (gallons per hour)
• To install unit on its side simply use a ½” marlex elbow (DMAR50)
1 – 24.............. $2.00 25 – 99............ $1.80 100 – 499......... $1.60 500 +............... $1.40
END DRIP EMITTERS & BUBBLERS
1/4" (250) Drip Emitter Tubing (Soaker Line)
This is an extremely popular and versatile product, this 1/4" tubing has small 1/2 GPH (Gallon per Hour) emitters extruded into
it at 6" or 12" spacing. This Drip Emitter Tubing is non-pressure compensating which means as the water pressure varies so will
the volume of water it emits. This product is great to wind around trees, shrubs, borders & flower beds; it works well to run in
rows for small vegetable gardens and raised planter boxes. It is also perfect for window boxes, planter boxes as well as gravity
fed and low pressure systems.
Photo of Emitter extruded into
1/4" (250) Drip Tubing
DD-SM360S Direct Drip Adjustable Spectrum Spray Full Circle (360) - 6" Spike
• Adjustable Umbrella Pattern Sprayer
• Replacement for Spectrum Sprayer
• Spike Length 6"
• 1/4" (250) Transfer Barb Included
• Operating Pressure: 15 - 30 PSI
• Flow Rate: 0 to 24 GPH
• Up to 5.5' Diameter
1 – 24.............. $0.50 25 – 99............ $0.45 100 – 399......... $0.33 400 +............... $0.29
• Works with all 1/4" (250) fittings
• Maximum Operating Pressure: 30 PSI
• Maximum Run Per Circuit/Branch: 6" = 19' & 12" = 33'
• When being fed off of DD-DH700 Drip Hose, the maximum total of this
tubing is: 6" = 200' (19' per branch) & 12" = 400' (33' per branch)
Pressure Flow Rate per Emitter
10 PSI 0.39 GPH (Gallons per Hour)
15 PSI 0.47 GPH
20 PSI 0.56 GPH
25 PSI 0.63 GPH
30 PSI 0.69 GPH
Product Number Product Description Less than 5 Units 5-9 Units 10 or more
DD-DET250-6-100 1/4" x 100' Drip Emitter Tubing 1/2 GPH Emitters Spaced 6" Apart $25.00 $20.00 $18.00
DD-DET250-12-100 1/4" x 100' Drip Emitter Tubing 1/2 GPH Emitters Spaced 12" Apart $18.00 $15.00 $14.00
* Due to fluctuations in raw material cost all pricing is subject to change without notice, for the most up to date pricing refer to our website: www.IrrigationDirect.com

Drip Irrigation
DRIP EMITTER TUBING
SOLID TUBING, FITTINGS & ACCESSORIES
Go Online to Order: www.irrigationdirect.com
1/2" 700 Drip Emitter Tubing .700" O.D x .600" I.D.
This product has become extremely popular and widely accepted, it has 1/2 or 1 GPH (gallon per hour) Pressure Compensating
emitters extruded right into the drip tubing, because it is pressure compensating this means you can operate it between 10
to 50 PSI and it will emit the same amount of water, this also makes it perfect for applications with changes in elevation (hills,
slopes, etc.). We offer this Drip Emitter Tubing in 12" & 18" spacing and roll lengths of 100' & 400', the reason we sell a
400' roll instead of 500' is this is the maximum amount we can fit in a box without incurring any extra fees from UPS.
• Uses same fittings as our 700 series Drip Hose
• Pressure Compensating Emitters are self flushing & clog resistant
• Will last 8 years in direct sunlight and longer if you mulch over it (recommended)
• All emitters emit same amount of water regardless of pressure
• Operating Pressure: 10 to 50 PSI, if you have higher pressure install a pressure regulator
• 120 to 150 mesh filter is recommended
• Maximum run per circuit:
- ½ GPH 12” spacing = 450’
- ½ GPH 18” spacing = 500’
- 1 GPH 18” spacing = 350’
Product Number Product Description 1 or 2 Rolls 3 or more
DD-DET700-512-100 1/2" x 100' Drip Emitter Tubing (.700" OD) 1/2 GPH PC Emitters Spaced 12" Apart $30.00 $28.00
DD-DET700-518-100 1/2" x 100' Drip Emitter Tubing (.700" OD) 1/2 GPH PC Emitters Spaced 18" Apart $25.00 $22.50
DD-DET700-1018-100 1/2" x 100' Drip Emitter Tubing (.700" OD) 1 GPH PC Emitters Spaced 18" Apart $25.00 $22.50
Product Number Product Description 1-4 Rolls 5-9 Rolls 10 or more
DD-DET700-512-400 1/2" x 400' Drip Emitter Tubing (.700" OD) 1/2 GPH PC Emitters Spaced 12" Apart $104.00 $98.80 $93.60
DD-DET700-518-400 1/2" x 400' Drip Emitter Tubing (.700" OD) 1/2 GPH PC Emitters Spaced 18" Apart $87.20 $82.84 $78.48
DD-DET700-1018-400 1/2" x 400' Drip Emitter Tubing (.700" OD) 1 GPH PC Emitters Spaced 18" Apart $87.20 $82.84 $78.48
1/2" 700 Polyethylene Solid Mainline Tubing
Product Number Product Description Price
DD-DH700-100
1/2" x 100' (.700" OD x .600" ID) Polyethylene Solid Mainline Tubing
(No holes or emitters in tubing)
$11.800/unit
Product Number Product Description Less than 5 Units 5-9 Units 10 or more
DD-DH700-500
Picture of Pressure Compensating
Emitter extruded into tubing
1/2" x 500' (.700" OD x .600" ID) Polyethylene Solid Mainline Tubing
(No holes or emitters in tubing)
The most common Main Line Drip Hose is .700" OD (outside diameter) by .600" ID
(inside diameter), and is referred to as "700" tubing or hose. This tubing is used as the
main feeder line to your Drip Irrigation System; you can create manifolds and branch
lines using this tubing:
• Used for Main Line of Drip Irrigation System
• .600" Inside Diameter & .700" Outside Diameter
END DRIP EMITTER TUBING
$55.00/unit $49.50/unit $47.00/unit
• Commonly called 1/2" or 5/8" Drip Hose
• Use 700 Series Compression fittings with this tubing, do not use 710 series fittings
• 240 GPH (Gallons Per Hour) Maximum Flow Rate per Circuit
• Operating Pressure: 10 - 60 PSI
• Recommended Pressure: 30 PSI
• High Quality PE (Polyethylene) Drip Tubing
• Manufactured with Finger Print PE Resign
• Blank Black Drip Tubing for Professional Installation
• This Drip Hose does not have holes in it
• This Drip Hose does not have emitters built into it
• This Drip Hose is not a soaker hose
1/4" Polyethylene or Vinyl Solid Micro Tubing
• 50' Maximum Run Length per Circuit
• 30 GPH (Gallons Per Hour) Maximum Flow Rate per Circuit
• Vinyl (v) is heavier + more flexible and is easier to work with
• Use with 1/4" (250) Fittings
Product Number Product Description 1-4 Rolls 5 or more
DD-DH250-100
DD-DH250V-100
1/4" x 100' (.250" OD x .170" ID) Polyethylene Solid Micro Tubing
(No holes or emitters in tubing)
1/4" x 100' (.250" OD x .170") ID Vinyl Solid Micro Tubing
(No holes or emitters in tubing)
$4.90 $4.50
$5.90 $5.50
Product Number Product Description 1-2 Rolls 3 or more
DD-DH250-1000
DD-DH250V-1000
1/4" x 1,000' (.250" OD x .170" ID) Polyethylene Solid Micro Tubing
(No holes or emitters in tubing)
1/4" x 1,000' (.250" OD x .170") ID Vinyl Solid Micro Tubing
(No holes or emitters in tubing)
DD-C250 Direct Drip 1/4" (250) Connector Barb X Barb
• Made of High Quality Plastic with Maximum UV Protection
• Operating Pressure: 10 - 40 PSI
• Designed for .170" ID (Inside Diameter) x .250" OD
(Outside Diameter) Drip Tubing DD-DH250
• Used to connect 2 pieces of 1/4" (250) Drip Tubing together
• Used to connect 1/4" (250) tubing to main line DD-DH700 Drip Hose
$39.50 $37.50
$52.00 $49.50
Product Number Product Description 1 - 24 25 - 99 100 - 999 1,000 or more
DD-C250 Direct Drip 1/4" (250) Connector Barb X Barb $0.10 $0.08 $0.052 $0.042
DD-CS250 Direct Drip 1/4" (250) Cross Barb x Barb x Barb x Barb $0.23 $0.18 $0.15 $0.13
DD-T250 Direct Drip 1/4" (250) Tee Barb x Barb x Barb $0.13 $0.10 $0.065 $0.055
DD-L250 Direct Drip 1/4" (250) Elbow Barb x Barb $0.11 $0.08 $0.06 $0.05

Drip Irrigation
SOLID TUBING, FITTINGS & ACCESSORIES
Go Online to Order: www.irrigationdirect.com
DD-GP Direct Drip Dual End Goof Plug
• Has a Small End for Plugging 1/4" Tubing
• Plug holes to correct mistakes
• Larger End for Plugging Larger Holes in Main Line Tubing
• Maximum UV Protection
1-24................ $0.05 25-99............... $0.04 100 – 999......... $0.03 1,000 or more.. $0.025
DD-RC700 Direct Drip Ratchet Clip Trellis Hanger for 700 Drip Hose
• UV Resistant Plastic Hanger
• To Hang 700 Drip Hose from Trellis Wire
• Designed for Vineyards & Orchards
1-9.................. $0.12 10-99............... $0.10 100 – 999......... $0.07 1,000 or more.... $0.06
DD-BP250 Direct Drip Bug Plug for ¼” (250) Tubing
• Install on the end of 1/4" (250) Drip Tubing 700 DD-DH250
• Allows Water to Still Come Out, but Keeps the Bugs from getting in your tubing!
• Also called an “Insect Plug”
1-24................ $0.08 25-99............... $0.07 100 – 999......... $0.05 1,000 or more.... $0.04
DD-KP Direct Drip Economical Hole Punch for 1/4" Barb
• Cost Effective Hole Punch
• Easy to put on a Key Ring
• High Quality Plastic
1-9.................. $0.40 10-24............... $0.30 25 – 99............ $0.25 100 or more...... $0.20
DD-FCV250 Direct Drip 1/4" (250) Flow Control Valve Barb x Barb
• Flow Control Valve easily connects to 1/4" (250) Drip Tubing DD-DH250 (.170" ID x .250" OD)
• 1/4 Turn Knob allows you to adjust the flow of water through 1/4" Drip Tubing
• Great for isolating individual flower pots or plantings
1-24................ $0.50 25-99............... $0.40 100 – 999......... $0.30 1,000 or more.... $0.25
DD-HP250 Direct Drip Deluxe Hole Punch for 1/4" Barb
• Designed to Fit Very Comfortably in your Hand
• Made of Heavy Duty Plastic
1-9.................. $3.60 10-24............... $2.90 25 – 99............ $2.30 100 or more...... $2.00
DD-S1 Direct Drip Tubing Hold Down Plastic Stake for 700 Tubing
• Best Way to Secure Drip Tubing
• High Quality Plastic with Maximum UV Protection
1-24................ $0.25 25-99............... $0.18 100 – 499......... $0.15 500 or more...... $0.13
DD-S2 Micro Tubing Holder Stake 6" - Multiple sizes .167" to .350" OD
• Used to Secure Emitters Near Plants
• Holds 1/8" & 1/4" Tubing in Place, 6" Length
• High Quality Strong Plastic with Maximum UV Protection
1-24................ $0.15 25-99............... $0.11 100 – 999......... $0.07 1,000 or more.... $0.06
DD-S8 8" Drip Tubing Hold Down Wire Stake fits 1/8" to 1/2" tube
• Made with Corrosion Resistant Steel
• Used for Securing 1/8" to 1/2" Drip Tubing
1-99................ $0.15 100 or more.... $0.079
DD-MC250 Direct Drip 1/4" (250) Drip Tubing Mounting Clip w/ Nail
• Used to Secure Tubing to Wood Surfaces
• Excellent for Clean Professional Installations
Product Number Product Description 1-24 25-99 100-999 1,000 or more
DD-MC250B Direct Drip ¼” (250) Drip Tube Mounting Clip - with Nail - Black $0.08 $0.07 $0.05 $0.03
Drip Hose US Dimensions - Inches
Compression
Commonly Called Fitting
Tubing # Size Inner Diameter Outer Diameter Wall Thickness Ring Color
185 1/8" 0.125 0.185 0.030 n/a
220 7/32" 0.160 0.220 0.030 n/a
250 1/4" 0.170 0.250 0.040 Orange
307 5/16" 0.250 0.307 0.028 Grey
350 11/32" 0.250 0.350 0.050 n/a
455 3/8" 0.375 0.455 0.040 Red
580 1/2" 0.500 0.580 0.040 Yellow
620 Raindrip 1/2" 0.520 0.620 0.050 Green
700 1/2" or 5/8" 0.600 0.700 0.050 Black
710 1/2" or 5/8" 0.620 0.710 0.045 Blue
830 3/4" 0.720 0.830 0.055 Grey
940 3/4" 0.820 0.940 0.060 Black
940 3/4" 0.830 0.940 0.055 Black
1200 1" 1.060 1.200 0.070 n/a
The most popular tubing used in the United States is 1/2" (700) Tubing for mainline applications and 250 for Micro Tubing,
which is what Irrigation Direct manufactures and sells. However over the years a variety of manufactures have marketed
different sizes of mainline tubing (455, 580, 620 & 710) so we therefore offer an assortment of adapters and fittings for other
sizes of tubing. An easy way for you to tell what size mainline tubing you have is by looking at the inner compression ring of
the fitting as they are color coded. Compression fittings fit over the outside diameter of the tubing. All of our mainline tubing
is 700 series so please make sure to use only 700 fittings.
Product Number Product Description 1-49 50-99 100-999 1,000 or more
DD-MC700B Direct Drip ½” (700) Drip Hose Mounting Clip - with Nail - Black $0.18 $0.15 $0.10 $0.08

Drip Irrigation
SOLID TUBING, FITTINGS & ACCESSORIES
Go Online to Order: www.irrigationdirect.com
1/2" 700 Series Compression Fittings
• Compression Fittings for 700 series Mainline Drip Tubing with .700" OD
(Outside Diameter) x .600” ID (Inside Diameter)
• Quick & Easy Installation
• High Quality Plastic with Maximum UV Protection
• Recommended Operating Pressure: 10 to 30 PSI
• Maximum Operation Pressure: 60 PSI
• Black Compression Ring
Product Number Product Description 1 - 9 10 - 24 25-99 100 +
DD-C700 Direct Drip Compression Coupling - ½” 700 Tubing (Black) $0.40 $0.35 $0.30 $0.26
DD-T700 Direct Drip Compression Tee - ½” 700 Tubing (Black) $0.55 $0.50 $0.45 $0.40
DD-L700 Direct Drip Compression Elbow - ½” 700 Tubing (Black) $0.55 $0.50 $0.45 $0.40
DD-CST700 Direct Drip Compression Swivel Tee - ½” 700 Tubing x ¾” FHT w/ washer (Black) $1.00 $0.85 $0.70 $0.63
DD-EC700 Direct Drip Compression End Cap - ½” 700 Tubing (Black) $0.50 $0.45 $0.40 $0.36
DD-CHS700 Direct Drip ¾” FHT Swivel Hose Adapter w/ washer x ½” 700 Tubing (Black) $0.65 $0.50 $0.45 $0.40
DD-CMH700 Direct Drip ¾” MHT x ½” 700 Compression Fitting (Black) $0.45 $0.40 $0.33 $0.30
DD-CFP700 Direct Drip ¾” FPT Swivel Hose Adapter w/ washer X ½” 700 Tubing (Black) $0.65 $0.50 $0.45 $0.40
DD-CMP700 Direct Drip ¾” MPT x ½” 700 Compression Fitting (Black) $0.45 $0.40 $0.33 $0.30
DD-FCV700 Direct Drip Flow Control Valve ½” 700 Tubing x ½” 700 Tubing (Black) $1.70 $1.50 $1.20 $1.08
Adapter Fittings – Connect existing Drip Tubing to our 700 Series Tubing
DD-CCA700-710 Direct Drip Compression Coupling Adapter 700 (black) x 710 (blue)
DD-CCA700-620 Direct Drip Compression Coupling Adapter 700 (black) x 620 (green)
DD-CCA700-580 Direct Drip Compression Coupling Adapter 700 (black) x 580 (yellow)
DD-CCA700-455 Direct Drip Compression Coupling Adapter 700 (black) x 455 (red)
1-9.................. $0.45 10-99............... $0.40 25 – 99............ $0.35 100 or more...... $0.30
620 Series Compression Fittings – Replacement for RainDrip ½”
• Compression Fittings for 620 series Mainline Drip Tubing with
.620" OD (Outside Diameter) x .520” ID (Inside Diameter)
• Do Not Use on our 700 Series Mainline Drip Tubing
• Replacement for “Green” Ring Raindrip compression fittings
• Quick & Easy Installation
• High Quality Plastic with Maximum UV Protection
• Recommended Operating Pressure: 10 to 30 PSI
• Maximum Operation Pressure: 60 PSI
Product Number Product Description 1 - 9 10 - 24 25-99 100 or more
DD-C620 Direct Drip Compression Coupling - 620 Tubing (Green) $0.40 $0.35 $0.30 $0.26
DD-T620 Direct Drip Compression Tee - 620 Tubing (Green) $0.55 $0.50 $0.45 $0.40
DD-L620 Direct Drip Compression Elbow - 620 Tubing (Green) $0.55 $0.50 $0.45 $0.40
DD-EC620 Direct Drip Compression End Cap - 620 Tubing (Green) $0.50 $0.45 $0.40 $0.36
DD-CHS620 Direct Drip ¾” FHT Swivel Hose Adapter w/ washer x 620 Tubing (Green) $0.65 $0.50 $0.45 $0.40
DD-CMH620 Direct Drip ¾” MHT x 620 Compression Fitting (Green) $0.45 $0.40 $0.33 $0.30
DD-FCV620 Direct Drip Flow Control Valve .620” x .620” Compression (Green) $1.70 $1.50 $1.20 $1.08
Compression Adapters – ½” Slip PVC Fitting x Compression Fitting Ring
• Convert from 1/2" Female Slip PVC Fitting to Compression Fit
for mainline tubing
• Allows you to connect mainline tubing to any ½” PVC fitting
• With all of the PVC Fittings available on the market this gives you
unlimited possibilities for connecting your Drip Irrigation System
to any existing Irrigation System
• Use with any PVC Glue
• Maximum UV Protection
710 Series Compression Fittings
• Compression Fittings for 710 series Mainline Drip Tubing with .710" OD
(Outside Diameter) x .620” ID (Inside Diameter)
• Do Not Use on our 700 Series Mainline Drip Tubing
• Quick & Easy Installation
• High Quality Plastic with Maximum UV Protection
• Recommended Operating Pressure: 10 to 30 PSI
• Maximum Operation Pressure: 60 PSI
Product Number Product Description 1 - 9 10 - 24 25-99 100 +
DD-C710 Direct Drip Compression Coupling - 710 Tubing (Blue) $0.40 $0.35 $0.30 $0.26
DD-T710 Direct Drip Compression Tee - 710 Tubing (Blue) $0.55 $0.50 $0.45 $0.40
DD-L710 Direct Drip Compression Elbow - 710 Tubing (Blue) $0.55 $0.50 $0.45 $0.40
DD-EC710 Direct Drip Compression End Cap - 710 Tubing (Blue) $0.50 $0.45 $0.40 $0.36
DD-CHS710 Direct Drip ¾” FHT Swivel Hose Adapter w/ washer x 710 Tubing (Blue) $0.65 $0.50 $0.45 $0.40
DD-CMH710 Direct Drip ¾” MHT x 710 Compression Fitting (Blue) $0.45 $0.40 $0.33 $0.30
DD-CFP710 Direct Drip ¾” FPT Swivel Hose Adapter w/ washer X 710 Tubing (Blue) $0.65 $0.50 $0.45 $0.40
DD-CMP710 Direct Drip ¾” MPT x 710 Compression Fitting (Blue) $0.45 $0.40 $0.33 $0.30
DD-CA700 Direct Drip ½” PVC Male x 700 Compression (Black)
DD-CA710 Direct Drip ½” PVC Male x 710 Compression (Blue)
DD-CA620 Direct Drip ½” PVC Male x 620 Compression (Green)
DD-CA580 Direct Drip ½” PVC Male x 580 Compression (Yellow)
DD-CA455 Direct Drip ½” PVC Male x 455 Compression (Red)
1-24................ $0.15 25 – 99............ $0.12 100 - 999.......... $0.10 1,000 or more.. $0.085
END SOLID TUBING, FITTING & ACCESSORIES

Drip Irrigation
MICRO JETS & SPRAYERS
Go Online to Order: www.irrigationdirect.com
DD-MSF40 Direct Drip 1-Piece Micro Spray Full Circle (360) Blue 0.040" Orifice
DD-MSF60 Direct Drip 1-Piece Micro Spray Full Circle (360) Red 0.060" Orifice
DD-MSH40 Direct Drip 1-Piece Micro Spray 1/2 Circle (180) Blue 0.040" Orifice
DD-MSH60 Direct Drip 1-Piece Micro Spray 1/2 Circle (180) Red 0.060" Orifice
DD-MSQ40 Direct Drip 1-Piece Micro Spray 1/4 Circle (90) Blue 0.040" Orifice
DD-MSQ60 Direct Drip 1-Piece Micro Spray 1/4 Circle (90) Red 0.060" Orifice
• Easy Grip Install, No Tools Required
• Threaded Base Allows for Installation on our Micro Stake Assemblies & Rigid Riser
Extenders (DD-MJSA-12 or 20 & MJRE-8, 12 & 18)
• Refer to our Website for Detailed Performance Specifications
1-99................ $0.15 100-99............. $0.10 1,000 or more.. $0.085
DD-MSB30 Direct Drip Micro Spray Base - Black 0.030" Orifice
DD-MSB40 Direct Drip Micro Spray Base - Blue 0.040" Orifice
DD-MSB50 Direct Drip Micro Spray Base - Green 0.050" Orifice
DD-MSB60 Direct Drip Micro Spray Base - Red 0.060" Orifice
• Easy Grip Install, No Tools Required
• Threaded Base Allows for Installation on our Micro Stake Assemblies & Rigid Riser Extenders
(DD-MJSA-12 or 20 & MJRE-8, 12 & 18)
• Refer to our Website for Detailed Performance Specifications
1-99................ $0.15 100-99............. $0.10 1,000 or more.. $0.085
DD-MCF Direct Drip Full Circle (360) 18 Hole Micro Spray Cap
DD-MCH Direct Drip 1/2 Circle (180) Micro Spray Cap
DD-MCQ Direct Drip 1/4 Circle (90) Micro Spray Cap
• Installs Easily on Micro Spray Bases
• Easy Arc Identification Marked on Top of Cap
1-99................ $0.15 100-99............. $0.10 1,000 or more.. $0.085
DD-MJVF Direct Drip Variable Adjust Micro Spray Full Circle (360) x 10-32 Thread
DD-MJVH Direct Drip Variable Adjust Micro Spray 1/2 Circle (180) x 10-32 Thread
DD-MJVQ Direct Drip Variable Adjust Micro Spray 1/4 Circle (90) x 10-32 Thread
• Easily Adjust Micro Spray Flow
• Threaded Base Allows for Installation on our Micro Stake Assemblies & Rigid Riser
Extenders (DD-MJSA-12 or 20 & MJRE-8, 12 & 18)
• Refer to our Website for Detailed Performance Specifications
DD-MJRE8 Direct Drip Micro Spray 8" Rigid Riser Extension w/ Threaded Adapter
• Easily Extend the Height of Micro Stake Assembly as Landscape Matures
• Can be Installed in Drip Tubing Main Line
• All 10-32 Threaded items can be installed into this item (Micro Sprayers,
Adjustable Emitters & Spectrum Style Sprayers)
Product Number Product Description 1 - 9 10 - 24 25 - 99 100 or more
DD-MJRE8 Direct Drip Micro Spray 8" Rigid Riser Extension w/ Threaded Adapter $0.28 $0.25 $0.23 $0.16
DD-MJRE12 Direct Drip Micro Spray 12" Rigid Riser Extension w/ Threaded Adapter $0.30 $0.28 $0.26 $0.19
DD-MJRE18 Direct Drip Micro Spray 18" Rigid Riser Extension w/ Threaded Adapter $0.33 $0.31 $0.29 $0.23
DD-MJSA12 Direct Drip 12" Micro Stake w/ 18" Vinyl Tubing w/ Adapter
• Labor Saving Pre-Assembled Micro Stake Assembly
• Designed to Accept all 10-32 Threaded Items
(Micro Sprayers, Adjustable Emitters, Spectrum Style Sprayer & Rigid Riser Extenders)
Product Number Product Description 1 - 24 25 - 99 100 or more
DD-MJSA12 Direct Drip 12" Micro Stake w/ 18" Vinyl Tubing w/ Adapter $0.70 $0.50 $0.45
DD-MJSA20 Direct Drip 20" Micro Stake w/ 18" Vinyl Tubing w/ Adapter $0.99 $0.75 $0.63
DD-SAT10 Direct Drip ½” FIPT x 10-32 NFT Adapter for Threaded
• Inlet: 1/2" FIPT (Female Internal Pipe Thread)
• Outlet: 10-32 NFT (Nominal Female Thread)
• This is a great part for retrofitting from a spray head type system to a more
efficient micro spray system
• This will install on any 1/2" male pipe threaded riser
• The following 10-32 threaded micro spray products will screw into this part:
DD-MJVF, DD-MJVH, DD-MJVQ, DD-SR360T, DD-SR180T, DD-SM360T, DD-VRS
1-24................ $0.50 25-99............... $0.45 100 or more...... $0.30
DD-VRS Direct Drip Adjustable Rotary Spray Full (360) Circle w/ 10-32 Thread
• Adjustable Sprayer Emits Fine Droplets of Water
• Flow Rate: 1 – 25 GPH
• Diameter: 4' – 15'
• Threaded Base Allows for Installation on our Micro Stake Assemblies & Rigid Riser
Extenders (DD-MJSA-12 or 20 & MJRE-8, 12 & 18)
1-9.................. $0.65 10-24............... $0.55 25-99............... $0.45 100 or more...... $0.35
1-9.................. $0.55 10-24............... $0.50 25 – 99............ $0.45 100 or more...... $0.32
DD-FCVTT Direct Drip Flow Control Valve - 10-32 Thread x 10-32 Thread
• Threading on both ends allows for Installation on Micro Stake Assemblies & Rigid
Riser Extenders (DD-MJSA-12 or 20 & MJRE-8, 12 & 18)
• High Quality Plastic with Maximum UV Protection
1-24................ $0.50 25-99............... $0.40 100-999........... $0.30 1,000 or more.... $0.25

Free Shipping on $90.00 orders
Same Day Shipping: Orders placed by 4pm PST (California)
Delivery Time - 1 - 5 Days: UPS Ground Service
3 Year Warranty on all Products
Order online 24 hours a day, 7 days a week
www.IrrigationDirect.com Order by phone or fax Monday - Friday 8am - 5pm (PST)
W e a c c e p t
American Express, Discover Card, Master Card & Visa • No Sales Tax on orders shipped outside California
Buy Factory Direct & Save 35-50%
we only sell Irrigation Direct brand products
Irrigation Direct • 266 Lindbergh Ave • Livermore, CA 94551
T: 877-436-6922 • F: 877-433-2948
www.IrrigationDirect.com