HM03145 High Efficiency DC/DC Module

APPLICATION INFORMATION
Timing Chart
The timing chart can be helpful for engineers
to see the operation of each pin of HM03145
and can be used to be the primary basis
during the error detection. The timing chart of
HM03145 during the normal operation is as
follows:
Furthermore, when the protection of HM03145
occurs, its timing chart can be further categorized
into three types. One is that when the output over
voltage occurs, the PGOOD terminal will convert
from the high level to the low level and output will
be turned off if the output voltage is higher than
the protection point. The timing for each pin is as
follows:
Figure 4. Normal Operation
When it comes to start-up, it should be noted
that the internal mechanism of HM03145 does
not allow the startup of PVCC to be faster than
that of the input voltage, so in order to make it
work normally, this problem should be avoided
in applications.
Figure 5. Output Over Voltage
TITLE: SPECIFICATION OF HM03145
PAGE REV:A1
PAGE 17 OF 30