Land Cruiser manual - Advance Adapters

26
KIT NUMBER
P/N 715571
Toyota Toyota Land Land Cruiser Cruiser Cruiser Transfer Transfer Case Case Twin Twin Stick Stick Stick Shifters:
Shifters:
The twin stick shifter was primarily developed to reconnect the transfer case linkage after installing one of our automatic adapter
kits. The transfer case gets relocated further back which required shifter modifications. This is where the development of the twin
stick originated. Once the concept and the first linkages were manufactured, the integration of the twin stick to our entire Land
Cruiser product line along with a stock vehicle was initiated. As we started looking into the various applications, we soon realized
the numerous configurations the twin stick kits would have to have. We currently produce five different versions of our twin stick kit.
Kits exist to fit various drivetrain combinations. The differences in these kits are mainly the shift handle configuration and the rod
lengths that shift the Mode and Range levers on the transfer case. Even though we produce five different kits, some kits will still
require some bending of the shift handles for a proper fit into the vehicle; and once these handles are bent they will also require
some welding. Other kits may also require some shortening of the Mode rod and Range rod. The kits listed below fit both 3 speed
and 4 speed transfer cases. Note that when replacing a vacuum operated shift mechanism with our twin stick linkage, you will be
required to purchase some additional stock components. The following are the most popular conversion applications:
Applications
1) Chevy V8 with a SM420 or SM465 transmission and our transfer case adapter
2) Chevy V8 with the stock 4 speed
Welding req’d.
P/N 715572
1) Stock 6 cylinder with stock 4 speed
NO
P/N 715573
1) Chevy V8 with TH350, 700R, & NV4500 transmission using our transfer case adapter
YES
P/N 715573B
1) Chevy V8 with a TH400 transmission using our transfer case adapter
YES
P/N 715574 1) Stock 6 cylinder with a SM420 or SM465 transmission.
NO
Each kit requires the installation of a new Mode shaft which is part of the kit. These kits include a new pivot shaft and all new
linkage components. The shift handles are not painted to allow you the option to do slight modifications or welding if your kit
requires such.
TWIN STICK BENEFITS:
* No linkage binding
* No shifter gating
* Low 2WD option
* Smooth operation
* Universal fit
The Toyota twin stick kits
come with a set of black knobs
that are not labled. We do
offer aluminum shifter knobs
for the Toyota twin stick kits.
These knobs are sold separately
under Part No. 715584 for
plain Aluminum or P/N 715584-AA
for Black Anodized.
TRANSFER CASE LINKAGES - TWIN STICK SHIFTERS
YES