Lexicon 480L | PDF - Freeverb3

Lexicon 480L | PDF - Freeverb3 Lexicon 480L | PDF - Freeverb3

srtalumni.com
from srtalumni.com More from this publisher
04.04.2015 Views

Lexicon 480L Owner's Manual Program Descriptions 1 The In/Out A bypass program that feeds an input signal unaltered through the processors. This program has no adjustable parameters. 2 Stereo Adjust A digital mixing program designed for mastering applications. The program loads with parameters nulled. 3 PONS Adjust A variation of Stereo Adjust which incorporates psychoacousticaly-optimized noise shaping (PONS) dither. 4 MS Decode A variation of Stereo Adjust that is preset to decode MS recordings. The mid signal is fed to the left input, and side is fed to the right. The Flip & Swap parameter can reverse the channels if a digital source is used. The BAL control provicdes the mix ratio of M and S signals. 5 Invert L-R A variation of Stereo Adjust that has the Flip & Swap parameter presetwith a digital phase inversion. 6 Channel Swap A variation of Stereo Adjust that has the Flip & Swap parameter preset to swap left and right channel input signals. 7 Stereo Parametric EQ 2-Band stereo parametric EQ and mixer with parameters nulled. 8 60Hz Notch A variation of Stereo Parametric EQ preset with a 60 Hz cut. 9 Mono Parametric EQ 4-Band mono parametric EQ and mixer with parameters nulled. 0 Panorama Integral crosstalk cancellation program adds width to stereo image. Use in cascade configurations with reverb or ambience in Machine A, and Panorama in Machine B. 8-12

9 Bank 10: the Compressor Programs This chapter describes the Compressor programs located in Bank 10.

9<br />

Bank 10: the Compressor Programs<br />

This chapter describes the Compressor<br />

programs located in Bank 10.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!