Lexicon 480L | PDF - Freeverb3
Lexicon 480L | PDF - Freeverb3 Lexicon 480L | PDF - Freeverb3
6 Bank 7: the Sampler Programs The Sampler programs located in Bank 7 include a variety of useful features for recording and production work. The programs allow slip syncing, copying, and time shifting of segments. Accurate triggering (response time is under 300 microseconds) allows replacement of drum or cymbal sounds (with full decay times) when tracking or overdubbing. Capture mode and editing features allow precise manipulation of sampled data. The samplers can also be triggered and controlled via MIDI. The variety of samplers available in the 480L can be a bit overwhelming to the uninitiated. To get started, we recommend loading each sampler, and experimenting with the controls. If you are uncertain about the effect of a parameter, look up its description at the end of this chapter.
Lexicon 480L Owner's Manual Introduction The 480L has a number of sampling programs, each with different features and capabilities. The optional Sampling Memory Expander (SME) board can be inserted into the fourth card slot in the 480L, providing 10.9 seconds of true phase-locked stereo sampling time, or 21.8 seconds of mono sampling time at a 48kHz sampling rate. As with all 480L programs, any sampling program can be loaded into either machine. This leaves the other machine free to process signals independently, or in conjunction with the sampling program, as in the following illustrations. Programs 1-8 in Bank 7 do not require the SME option. They are: Program Sampling Time # Name @ 48kHz 1 Stereo 3S 2.7 Sec. 2 Mono 6S 5.4 Sec. 3 Mono 3S 2.7 Sec. 4 Dual Rate Change 2 x 1.4 Sec. 5 Mono Fwd & Rev 1.4 Sec. 6 Stereo 3Sec Drum 2.7 Sec. 7 Dual Rate Change Drum 2 x 1.4 Sec. 8 Mono Fwd/Rev Drum 1.4 Sec. Programs 9 and 0 in Bank 7 require the SME card. Dual Mono L R 9 Stereo Rate Change 10S 10.9 Sec. 0 Mono Rate Change 20S 21.8 Sec. Mach A Sampler Mach B Reverb Note: All samplers record slightly longer times when the 480L sampling rate is set to 44.1 kHz. Cascade L L R L R R Mach A Doppler Mach B Sampler After capturing Doppler in Sampler, program can be changed and used independently of Sampler with recorded effect. L R Mach A Dual Rate Change Drum Mach B Dual Rate Change Drum L R L R MIDI Trigger 4-Voice Drum Replace with MIDI playback trigger. Note value changes playback rate and pitch. 6-2
- Page 11 and 12: Installation and Audio Connections
- Page 13 and 14: Installation and Audio Connections
- Page 15 and 16: Installation and Audio Connections
- Page 17 and 18: Installation and Audio Connections
- Page 19 and 20: 2 Basic Operation This chapter desc
- Page 21 and 22: Basic Operation Operating Modes The
- Page 23 and 24: Basic Operation Checking Your Syste
- Page 25 and 26: Basic Operation Using Two LARCs to
- Page 27 and 28: Basic Operation Level Calibration A
- Page 29 and 30: Basic Operation Setting Analog Inpu
- Page 31 and 32: Basic Operation Using Digital Signa
- Page 33 and 34: Basic Operation Storing and Naming
- Page 35 and 36: Basic Operation MIDI SysEx Program
- Page 37 and 38: Basic Operation A dumped register b
- Page 39 and 40: Lexicon 480L Owner's Manual Before
- Page 41 and 42: Lexicon 480L Owner's Manual Page On
- Page 43 and 44: Lexicon 480L Owner's Manual Page Tw
- Page 45 and 46: Lexicon 480L Owner's Manual Program
- Page 47 and 48: Lexicon 480L Owner's Manual Program
- Page 49 and 50: Lexicon 480L Owner's Manual Program
- Page 51 and 52: Lexicon 480L Owner's Manual Program
- Page 53 and 54: Lexicon 480L Owner's Manual Page On
- Page 55 and 56: Lexicon 480L Owner's Manual WANDER
- Page 57 and 58: Lexicon 480L Owner's Manual Program
- Page 59 and 60: Lexicon 480L Owner's Manual Page On
- Page 61: Lexicon 480L Owner's Manual Program
- Page 65 and 66: Lexicon 480L Owner's Manual How to
- Page 67 and 68: Lexicon 480L Owner's Manual Time Va
- Page 69 and 70: Lexicon 480L Owner's Manual Stereo
- Page 71 and 72: Lexicon 480L Owner's Manual HEAD TR
- Page 73 and 74: 7 Bank 8: the Pitch Change and Dopp
- Page 75 and 76: Bank 8: the Pitch Change and Dopple
- Page 77 and 78: Bank 8: the Pitch Change and Dopple
- Page 79 and 80: 8 Bank 9: the Mastering Programs Th
- Page 81 and 82: Bank 9: the Mastering Programs If s
- Page 83 and 84: Bank 9: the Mastering Programs Page
- Page 85 and 86: Bank 9: the Mastering Programs Page
- Page 87 and 88: Bank 9: the Mastering Programs Page
- Page 89 and 90: Bank 9: the Mastering Programs LFB
- Page 91 and 92: 9 Bank 10: the Compressor Programs
- Page 93 and 94: Bank 10: the Compressor Programs AT
- Page 95 and 96: 10 Banks 11-12: the Random Halls an
- Page 97 and 98: Banks 11-12: the Random Halls and S
- Page 99 and 100: Banks 11-12: the Random Halls and S
- Page 101 and 102: Banks 11-12: the Random Halls and S
- Page 103 and 104: 11 Banks 13-14: the Ambience Progra
- Page 105 and 106: Banks 13-14: the Ambience Programs
- Page 107 and 108: Banks 13-14: the Ambience Programs
- Page 109 and 110: Banks 13-14: the Ambience Programs
- Page 111 and 112: 12 Bank 15: the Prime Time III Prog
<strong>Lexicon</strong> <strong>480L</strong> Owner's Manual<br />
Introduction<br />
The <strong>480L</strong> has a number of sampling programs, each<br />
with different features and capabilities. The optional<br />
Sampling Memory Expander (SME) board can be<br />
inserted into the fourth card slot in the <strong>480L</strong>, providing<br />
10.9 seconds of true phase-locked stereo sampling<br />
time, or 21.8 seconds of mono sampling time at a<br />
48kHz sampling rate.<br />
As with all <strong>480L</strong> programs, any sampling program can<br />
be loaded into either machine. This leaves the other<br />
machine free to process signals independently, or in<br />
conjunction with the sampling program, as in the following<br />
illustrations.<br />
Programs 1-8 in Bank 7 do not require the SME option.<br />
They are:<br />
Program<br />
Sampling Time<br />
# Name @ 48kHz<br />
1 Stereo 3S 2.7 Sec.<br />
2 Mono 6S 5.4 Sec.<br />
3 Mono 3S 2.7 Sec.<br />
4 Dual Rate Change 2 x 1.4 Sec.<br />
5 Mono Fwd & Rev 1.4 Sec.<br />
6 Stereo 3Sec Drum 2.7 Sec.<br />
7 Dual Rate Change Drum 2 x 1.4 Sec.<br />
8 Mono Fwd/Rev Drum 1.4 Sec.<br />
Programs 9 and 0 in Bank 7 require the SME card.<br />
Dual Mono<br />
L<br />
R<br />
9 Stereo Rate Change 10S 10.9 Sec.<br />
0 Mono Rate Change 20S 21.8 Sec.<br />
Mach A<br />
Sampler<br />
Mach B<br />
Reverb<br />
Note: All samplers record slightly longer times when<br />
the <strong>480L</strong> sampling rate is set to 44.1 kHz.<br />
Cascade<br />
L<br />
L R L R<br />
R<br />
Mach A<br />
Doppler<br />
Mach B<br />
Sampler<br />
After capturing Doppler in Sampler, program can be changed<br />
and used independently of Sampler with recorded effect.<br />
L<br />
R<br />
Mach A<br />
Dual Rate<br />
Change Drum<br />
Mach B<br />
Dual Rate<br />
Change Drum<br />
L R L R<br />
MIDI Trigger<br />
4-Voice Drum Replace with MIDI playback trigger. Note<br />
value changes playback rate and pitch.<br />
6-2