Lexicon 480L | PDF - Freeverb3

Lexicon 480L Owner's Manual
Programs — Bank 16: Distression
6 Carbon Mic
DST EXM XOV HFC XOM DGN
208 63 181Hz 5.5k allfx 106
TSL TBR TBM EXP SUS DHP
84 -17 17dB 3 94 304Hz
DLY LSL LFR LMG ATC RTC
5.82m 122 -19 9dB 2 4
GATE
99
7 Saxophone
DST EXM XOV HFC XOM DGN
225 45 430Hz 5.5k 52% 255
TSL TBR TBM EXP SUS DHP
255 14 20 7 68 4.6k
DLY LSL LFR LMG ATC RTC
7.32k 196 -19 10 3 7
GATE
99
8 Horn Blast
DST EXM XOV HFC XOM DGN
255 63 60Hz 6.3k 50% 57
TSL TBR TBM EXP SUS DHP
226 15 9db 94 21 90
DLY LSL LFR LMG ATC RTC
10.3m 206 -23 9dB 2 4
GATE
99
9 Softener
DST EXM XOV HFC XOM DGN
65 63 151 5.5k 64% 0
TSL TBR TBM EXP SUS DHP
190 21 22 115 0 212Hz
DLY LSL LFR LMG ATC RTC
14.9m 82 -13 0 2 8
GATE
77
Program Descriptions
6 Carbon Mic
The sound from 1938. This preset sends a soft amount
of treble gain into the distressor. The treble component
starts at 181Hz. Crossover(XOM) mix is set to all
treble. EXM is also set to max at 63. DHP (Distression
High Pass) rolls off the bottom end. If you reduce XOM,
more of the low frequency component will be audible.
Use this to obtain an old, scratchy sort of sound.
7 Saxophone
This preset is designed as an alternative to reaching for
the EQ knobs.There is a reasonable amount of lowfrequency
compressed energy. Take the result and
send into a Plate program in the Cascade mode machine
B. (Mix the Plate program to something other
than 100%)
8 Horn Blast
This agressive preset is designed to enhance your
horn section. If you want to tone it down, reduce
HFC(High Frequency Cut for distression component)
and/or reduce TSL (treble slope).
9 Softener
Very soft edge on anything. Try it on a vox track. Subtle
effect.
0 Some Fuzz
If you need More Fuzz increase DGN(Distression
Gain), lower XOV and increase XOM.
0 Some Fuzz
DST EXM XOV HFC XOM DGN
255 63 752Hz 6.3 64% 66
TSL TBR TBM EXP SUS DHP
226 15 21 0 0 30Hz
DLY LSL LFR LMG ATC RTC
5.82 206 -23 9 2 4
GATE
99
13-6