Heavy Duty Balanced Opposed Compressors - Ariel Corporation

For Models: JGH:E:K:T Section 1 - Tools
Ariel Separately Purchased Tool Kits
1. Ariel SAE Hand Measurement Tool Kit
a. .0005” needle type dial indicator.
b. .001” 1-inch travel dial indicator.
c. Magnet base for dial indicator.
d. 3/8” drive calibrated torque wrench, 30 to 200 in x lbs.
e. 1/2” drive calibrated torque wrench, 30 to 250 ft x lbs.
f. 3/4” drive calibrated torque wrench, 100 to 600 ft x lbs.
g. 1” drive calibrated torque wrench, 200 to 1000 ft x lbs.
2. Ariel SAE Hand Tool Kit
a. 15-piece combination open/box end wrench set, 5/16” through 1-1/4”.
b. 8-piece slot and Phillips screwdriver set.
c. 3/8" square drive wrench set, including:
• 12-piece, 12-point socket set, 3/8” through 1”.
• 7” ratchet. • Ball type universal joint.
• Speed handle. • 3/8” to 1/2" drive adapter.
• Extensions, 1-1/2”, 3”, 6”, and 12”. • 1/4” hex key socket.
• 8-1/2” breaker bar.
d. 1/2" square drive wrench set, including:
• 14-piece, 12-point socket set, 7/16” through 1-1/4” with clip rail.
• 10-1/4” ratchet. • Ball type universal joint.
• Speed handle. • 1/2” to 3/8" drive adapter.
• Extensions, 1-1/2”, 5”, and 10”. • 1/2” to 3/4" drive adapter.
• 18” breaker bar. • 1/2” and 5/8” hex key sockets.
• 1-1/4” open end crow’s foot adapter.
e. 3/4" square drive wrench set, including:
• 18-piece, 12-point socket set, 3/4” through 2”.
• 24” ratchet. • 3/4” to 1/2" drive adapter.
• Extensions, 3-1/2”, 8”, and 16”. • 3/4” to 1" drive adapter.
• 22” breaker bar. • 1” to 3/4" drive adapter.
f. 1" square drive wrench set, including:
• 14-piece, 12-point socket set, 1-7/16” through 2-5/8”.
• 30” ratchet.
• Extensions, 8”, and 17”.
• 22” sliding T.
g. 12” adjustable wrench.
h. 18” adjustable wrench.
i. One 3 lb. dead blow semi-soft faced hammer.
3/11 PAGE 1-3