Access Virus User Manual - SoundProgramming.Net

8 CHAPTER 2
Safety Remarks
Always pull the actual plug,
never the cord, when you’re
unplugging the device.
Operation
Don’t set beverages or any other
receptacle containing liquids on
the device.
Make sure the device is placed
on a solid base. Set it on a stable
tabletop or mount it to a rack.
Make sure that no foreign
objects fall into or somehow end
up inside the device’s housing. In
the event that this should occur,
switch the device off and pull the
power plug. Then get in touch with
an authorized dealer.
Used on its own and in conjunction
with amps, loudspeakers or
headphones, this device is able to
generate levels that can lead to
irreversible hearing damage. For
this reason, always operate it at a
reasonable volume level.
Memory battery change
The Virus stores its sound programs
in a battery-buffered RAM.
This battery (general type designation:
CR2032) should be replaced
every three to four years. The housing
has to be opened to change the
battery, so take the device to a
qualified service technician. Do
your part in protecting our environment
and take it to a shop that
disposes of batteries properly.
Before you have the battery
changed, save the entire memory
content of the RAM by loading it to
a sequencer via "Total Dump". Be
advised that RAM content is lost
when the battery is swapped (see
“Midi Dump TX” on page 174).
Care
Do not open the device, it is not
equipped with any user-serviceable
parts. Repair and maintenance
may only be carried out by
qualified specialists.
Use only a dry, soft cloth or brush
to clean the device.