Stormwater Pollution Prevention Plan - Phoenix Sky Harbor ...

AZMSG2010-002 ●AZMSG2010-003
NOTICE OF INTENT INSTRUCTIONS
for Stormwater Discharges Associated with
INDUSTRIAL ACTIVITY
under the AZPDES 2010 Multi-Sector Permits
Who Must File A Notice Of Intent (NOI)
Under section 402(p) of the Clean Water Act (CWA) and regulations
in 40 CFR 122, stormwater discharges associated with industrial activity
are prohibited to waters of the United States unless covered under an
authorizing permit. In Arizona, such discharges are covered by Arizona
Pollutant Discharge Elimination System (AZPDES) permits. Coverage
may be obtained under one, or both, Multi-Sector General Permits
(MSGPs) by submitting a completed NOI if you operate a facility that:
● Discharges stormwater associated with industrial activities,
identified in Appendix C of the MSGP;
● Meets the eligibility requirements in Part 1.1 of the permit;
● Develops a stormwater pollution prevention plan (SWPPP) in
accordance with Part 5 of the MSGP; and
● Installs and implements control measures in accordance with
Parts 2 and 8 of the MSGP to meet numeric and non-numeric
effluent limits.
If you are unsure if you need an AZPDES stormwater permit for
discharges associated with industrial activity, contact ADEQ’s stormwater
permitting program at (602) 771-4508.
One NOI must be submitted for each facility for which you are
seeking permit coverage. However, you do not need to submit a
separate NOI for each type of industrial activity present at your facility,
provided your SWPPP covers all industrial activities.
When to File the NOI Form
Do not file your NOI until you have obtained and thoroughly read the
AZPDES 2010 MSGPs, which are located at:
Mining: http://azdeq.gov/environ/water/permits/download/
2010/122010g.pdf.
Non-Mining: http://azdeq.gov/environ/water/permits/download/
2010/122010f.pdf.
The MSGPs describe procedures to ensure your eligibility, prepare
your SWPPP, install and implement appropriate stormwater control
measures, and complete the NOI form questions – all of which must be
done before you sign the NOI certification statement attesting to the
accuracy and completeness of your NOI. You will also need a copy of
the appropriate MSGP once you have obtained coverage so that you can
comply with the implementation requirements of the permit.
Where to File the NOI Form
Notice of Intent forms sent by regular or overnight/express mail:
Arizona Department of Environmental Quality
Surface Water Section / Stormwater Program
1110 West Washington, 5415A-1
Phoenix, Arizona 85007
Notice of Intent forms sent by facsimile:
(602) 771-4528
The SWPPP does not need to be submitted to ADEQ for review
unless the facility is within 2.5 miles of an impaired or outstanding
Arizona water (OAW) or ADEQ specifically requests a copy of the
SWPPP.
Completing the NOI Form
Be certain that you complete all fields. Make a photocopy for your
records before you send or fax the completed form to the location listed
above.
Section A. NOI Revision
This section does not apply to a permit renewal.
Complete this section ONLY if your facility is permitted under one, or
both, of the 2010 MSGPs and information has changed that requires you
to update your NOI.
Section B. Facility Operator Information
Provide the name of the person who will serve as the primary
contact for the facility.
Provide the legal name of the firm, public organization or other
public entity that operates the facility described in this NOI. An operator
is a legal entity that controls the operation of the facility.
Provide the operator’s mailing address, telephone number, fax
number (optional), and email address. All correspondence will be sent
to this address.
Section C. Facility Information
1. Provide the facility’s official or legal name. Unless the name of your
facility has changed, please use the same name provided on prior
NOIs.
2. Provide the street address, city, state, zip code, and county of the
actual physical location of the facility. If the facility does not have
an address, provide driving directions from the nearest
municipality. Do not use a PO Box number.
3. Provide the latitude and longitude of the facility in degrees,
minutes, and seconds. You can obtain these coordinates through
geographic information system tools, topographic maps, or
ADEQ’s web-based GIS mapping system at: http://gisweb.azdeq.
gov/arcgis/emaps/?topic=impaired.
For consistency, take the coordinates from the location of
your facility’s stormwater outfall. Outfalls are locations where the
stormwater exits the facility, including pipes, ditches, swales, and
other structures that transport stormwater. If there is more than
one outfall present, provide the coordinates of the primary outfall
(i.e., the outfall with the largest volume of stormwater discharge
associated with industrial activity).
4. Indicate if industrial stormwater discharges from your facility were
previously covered by a NPDES or AZPDES permit.
If the facility was covered by the 2000 MSGP, include the EPA
tracking number or the ADEQ authorization number, whichever is
applicable. If the facility was covered under an AZPDES individual
permit, include that permit number.
5. Indicate whether the facility is located on Indian Country Lands. If
you answered yes, DO NOT submit this NOI to ADEQ. The
Department does not have permitting authority on Indian County
Lands. You must coordinate with the U.S. EPA for permit coverage
on Indian Country Land within Arizona.
6. Provide the sector and subsector codes, and SIC or Activity Codes
that best describes the primary industrial activities performed by
your facility. Your primary industrial activity includes any activities
performed onsite that are (1) identified by the facility’s SIC code for
which the facility is primarily engaged; and (2) included in the
narrative descriptions of 40 CFR 122.26(b)(14)(i), (iv), (v), or (vii)
and (ix). See Appendix C of the MSGP for a complete list of SIC
codes and Activity Codes. See the footnote in Appendix C, or
Table 1, for how to determine the SIC code.
Enter the area (in acres) of industrial activity at your facility
that is exposed to stormwater.
7. If your facility has co-located industrial activities that are not
identified as your primary industrial activity, identify the sector and
subsector codes, SIC or Activity Codes, and area (in acres) that
describe these other industrial activities. For a complete list of
sector and subsector codes, see Appendix C of the MSGP.
Enter the area of industrial activity (by SIC or AC code) of
all co-located sites exposed to stormwater.
8. Indicate whether the facility is expected to be inactive and
unstaffed at any time during the permit term. If yes, specify the
AZPDES 2010 MSGP Notice of Intent Instructions Page 1 of 2 March 15, 2011-rev