Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 4 >> Initial Settings and Operations<br />
Getting Started<br />
Setting the Clock<br />
1 Select the desired time zone using the Arrow<br />
(▲/▼) buttons<br />
2 Select if you want to use daylight saving time<br />
using the Arrow (▲/▼) buttons. Select between<br />
On and Off<br />
3 Press the blue button to continue.<br />
Antenna Setting Tuner 1<br />
You can set antenna and LNB information for<br />
scanning channels. If antenna is not correctly set,<br />
you cannot scan channels, therefore you cannot<br />
watch any programs.<br />
1 Select Antenna Setting using the Arrow (▲/▼)<br />
buttons and press the OK button.<br />
Antenna setting menu appears.<br />
2 Select satellite for channel scan using the Arrow<br />
(▲/▼) or Page (+/-) buttons and press the<br />
Arrow (◄/►) button to select at option.<br />
3 Select an option using the Arrow buttons.<br />
LNB Power: On or Off (Defaulf: Off)<br />
Longitude: Using Defaultmode<br />
LNB Type: Universal 1, Universal 2 (Default<br />
Universal 1)<br />
LNB Freq: Frequency can be input with<br />
numeric key with RCU<br />
DiSEqC Port:1~4 for 1.0 and Tone Burst 1~2 and Off.<br />
Tone 22kHz: On, Off or Auto (Default: Auto)<br />
Unicable: Press OK Button to choose one IF by Auto detection<br />
Motor: Moving Antenna unsing DiSEqC1.2 or USALS<br />
DiSEqC1.1: Uncommited DiSEqC Command 1-16<br />
English 13