Tempest® Hot Air Drying System Installation Instructions
Tempest® Hot Air Drying System Installation Instructions
Tempest® Hot Air Drying System Installation Instructions
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION<br />
16<br />
Remove one of the two screws that attach the guard prop to the<br />
delivery guard on the NOPS. Install the supplied longer M4 screw<br />
in its place and using the original nut secure the provided cable<br />
clamp (subject arrow) to the underside of the guard. Make sure you<br />
have the exhaust fan cable going through the clamp before securing<br />
it to the guard.<br />
17<br />
Place the larger heat shield in the delivery as shown.<br />
18<br />
Place the small heat shield in the delivery and attach it to the larger<br />
shield, with two 10-32 x 1/4 button head screws and flat washers.<br />
19