AUCTION CATALOGUE

AUCTION CATALOGUE
By order of Pennant Clothing Limited
Due to Closure of their Fine Gauge Knitwear Manufacturing Plant
(Ex Jaeger Manufacturing Facility)
LIVE AND WEBCAST AUCTION SALE
FULLY FASHIONED AND CNC KNITTING MACHINES,
CNC EMBROIDERY MACHINES,
SEWING AND NECK LINKING MACHINES,
COMPRESSORS
AND
GENERAL FACTORY EQUIPMENT
To Be Sold In Lots At:
Pennant Clothing Limited, Penn Street, Belper,
Derbyshire, DE56 1GG, UK
On: Tuesday 8 th June 2004
At: 11:00am
On View: Monday 7 th June 2004 from 9:30am to 4:30pm
and on morning of sale

CONDITIONS OF SALE
1. These Conditions together with those set out in the Notice to Purchasers appearing in this catalogue are
the only terms and conditions subject to which Henry Butcher International Limited (”the Auctioneer”) as
agent for the Vendor will sell goods to a purchaser (“the Bidder”) and all other conditions, whether express,
or implied at common law or by statute as are capable of lawful exclusion are hereby excluded.
2. The Auctioneer may at its discretion or upon the instruction of the Vendor:
(a) Alter or withdraw all or any lots referred to in this auction catalogue up to the moment at which the
hammer falls in relation to such lot(s).
(b) Where a reserve has been placed on any lot, withdraw that lot in the event that the highest bid price
does not meet the reserve.
(c) Where two or more consecutive lots are similar in quantity and description offer a choice on any
subsequent lots to the bidder at the same price.
(d) Bid for any lot or lots offered for sale at the Auction.
3. Each lot shall be sold to the highest bidder and in the event of any dispute arising between bidders
such dispute shall be dealt with in such manner as the Auctioneer may in its absolute discretion
determine.
4. Bidding shall be regulated by the Auctioneer in such manner as it may think fit and, without prejudice to
the generality of the foregoing the Auctioneer may without ascribing any reason therefore, refuse to
accept any bid or may itself bid for the lot in question on behalf of any third party.
5. The Purchaser will pay to the Auctioneer such premium on the “Hammer Price” as stipulated in the
Notice To Purchasers attached hereto, to which will be added Value Added Tax (“VAT”) at the current
rate. The premium is not negotiable and is payable by all purchasers. The Auctioneer, when acting as
agent for the Vendor, may also receive commission from the Vendor.
6. (a) Immediately following the fall of the hammer the Bidder may be required to pay the Auctioneer in
cash or in whatever form the Auctioneer may agree 25 per cent of the price of each lot which it has
purchased and will supply the Auctioneer with whatever information the latter may require concerning
the identity and place of abode/incorporation/centre of main business interest of the Bidder. Deposits
paid hereunder shall be held by the Auctioneer as general deposit for all lots purchased by the Bidder
at the sale;
(b) The balance of purchase monies due will be paid to the Auctioneer on or before the date specified
in the Notice to Purchasers.
(c) All lots will be cleared by the Bidder from the premises at which they are sold (subject to the
conditions set out in Paragraph 7 hereof) not later than the time and date specified in the Notice to
Purchasers and this condition shall be of the essence of the contract.
(d) Should the Bidder fail to comply with any of the foregoing requirements the lot or lots which have
been knocked down to him or any part thereof may be re-offered for sale, destroyed or otherwise
disposed of by the Auctioneer in any manner as it shall in its absolute discretion deem fit, and any
deposits paid shall be forfeit;
(e) Without prejudice to any claims that the Auctioneer and/or the Vendor may have against the Bidder
for breach of contract or otherwise the Bidder will become liable from the expiration of the time referred
to in Paragraph 6(c) hereof for all storage, security and administration expenses and the cost of and
incidental to re-selling and/or otherwise disposing of uncleared items.
7. (a) The Bidder will only remove lots from the Vendor’s premises by previous arrangement with, and
subject to the supervision of, the Auctioneer or its appointed representative(s);
(b) The Bidder will not be permitted to remove any lots it has purchased from the Vendor’s premises
until all sums due in respect thereof have been paid;
(c) If, in the Auctioneer’s opinion, removal of any lot or part thereof will be likely to cause serious
damage to the Vendor’s premises, or any other damage which the Bidder is either unable or unwilling
to rectify, the Auctioneer may by notice to the Bidder rescind the sale of such lot or permit the removal
thereof from the premises to proceed subject to such conditions as it may think fit to impose pursuant
to Paragraph 8 hereof;

(d) Should any party claim possession of or title to all or part of a lot prior to its removal from the
Vendor’s premises, the Auctioneer reserves the right to rescind the sale thereof or to permit the
removal thereof from the Vendor’s premises subject to such conditions as it may see fit to impose.
8. The Bidder will be responsible for all damage that it, its carriers or its agents may do to the property of
any third party (and in particular, to the Vendor’s premises) in removing the lot(s) it has purchased.
Should the Auctioneer consider such damage likely to occur, it may require the Bidder to deposit such
sum of money with the Auctioneer, by way of security for the costs of reinstating that part of the
premises likely to be damaged by the removal of a lot, as the Auctioneer may require. Should the
Bidder refuse to deposit such monies, the Auctioneer may refuse the Bidder access to the Vendor’s
premises for the purpose of collecting all or any of the lots it has purchased, or rescind the sale of such
lot pursuant to Clause 7(c) above.
9. (a) The Bidder is on risk once the hammer falls and is strongly advised to effect insurance at once.
Upon the fall of the hammer the Bidder shall assume all risks in and relating to such lots. The Bidder is
advised to effect in respect of all such risks arising thereafter any insurance it may consider necessary.
The duty of the Auctioneer and/or the Vendor to deliver lots shall be deemed performed upon the fall of
the hammer even if a lot is subsequently damaged and/or part thereof has been lost.
(b) Property in each lot shall not pass to the Bidder until (i) full payment therefore has been made or
(where payment or part payment is made by cheque) until the cheque(s) in question have been cleared
and (ii) each such lot has been removed from the premises in its entirety.
10. The Vendor and the Auctioneer shall not be liable in respect of any claim whether in contract or in tort
(other than claims in respect of injury to persons arising out of the negligence of the Vendor or
Auctioneer) by the Bidder arising out of or in, any way in connection with the sale or purported sale of
all or any of the goods for any sum exceeding the amount of the deposit or purchase price (as the case
may be) paid by the Bidder in respect of the goods which are the subject of the claim.
11. All goods are sold with all faults and imperfections and errors of description. Illustrations in catalogues
are for identification only. The Auctioneer has used its reasonable endeavours to ensure that the
description of each lot(s) appearing in this catalogue are accurate, but the Bidder relies upon such
description at its own risk. Bidders should satisfy themselves prior to the sale as to the condition of the
lot and should exercise and rely on their judgment as to whether the lot accords with its description. No
lots sold in this catalogue are sold as new. Subject to the obligations accepted by the Auctioneer under
these conditions of sale neither the Vendor, the Auctioneer or its servants or agents is responsible for
errors of description or for the genuineness or authenticity of any lot and no warranty whatever is given
by the Auctioneer, its servants or agents or the Vendor to the Bidder in respect of any lot and any
express or implied conditions or warranties are hereby excluded.
12. The price at which the Bidder purchases each lot will be exclusive of the premium (payable under
clause 5) and VAT. Where the Bidder intends any lot to be exported outside the UK a refund of VAT
will (subject to what-ever regulations made from time to time may be in force) be available upon the
production by the Bidder of such proof of the export as the Auctioneer may require.
13. The Vendor and the Auctioneer hereby severally exclude liability for any accident or injury, howsoever
arising, sustained by any person or persons who may attend at the premises for the purpose of the
auction, inspection, purchase, collection or any other business.
14. Certain lots have been included on behalf of other clients in this sale by kind permission of the Vendor.
15. Delivery of lot(s) purchased by the Bidder (which shall be at the sole expense of the Bidder) may not be
required by him outside normal business hours and is to be made within a reasonable time following
payment in full. In determining what is a reasonable time just allowance shall be made for all relevant
contingencies which may arise otherwise than by the negligence of the Vendor or the Auctioneer, and
in particular, but without prejudice to the generality of the foregoing, for any suspension or failure of
material services, civil commotion, strike or other industrial action, or other impediment to normal
delivery outside the control of the Vendor or the Auctioneer. Neither the Vendor nor the Auctioneer
shall be required to incur any expense towards overcoming such impediment unless indemnified there
from and put in funds to meet such expense by the Bidder. The Auctioneer shall not be obliged to take

any legal proceedings for the removal of any such aforesaid impediment to delivery of lot(s) which
might in its own judgement exacerbate the matter or be detrimental to its own reputation or goodwill.
16. It is expressly brought to the Bidder’s attention that, at the time of sale, any item of plant, machinery or
equipment contained in the lot(s) may not necessarily comply with the Health and Safety at Work Etc.
Act 1974, Environmental Protection Act 1990 or any other UK and/or EEC Act or Acts or Regulations
there under governing the use of that plant, machinery or equipment in a working environment.
Successful Bidders for any such plant, machinery or equipment are hereby required to ensure that the
use of any such plant and equipment at a place of work within the UK or EEC does not contravene
such relevant Act or Regulation there under applicable thereto. The Purchaser undertakes to take
steps sufficient to ensure the lot will be safe and without risks to Health & Safety when properly used
and thereby relieves the Vendor and Auctioneer from any Health & Safety duties imposed by sub
section 1A of Clause 6 of the Health & Safety 1974 Act.
17. It is expressly brought to the Bidder’s attentions that certain types of plant or main service installations
could contain blue or white asbestos, dangerous chemicals, etc. which if not handled correctly during
their removal from the site could be in breach of the Health and Safety at Work Etc. Act 1974 Section
2-9 and Control of Substances Hazardous to Health Regulations 1988 (COSHH) or any other current
legislations covering the use of such substances in a working environment.
18. The Bidder must comply with all current legislations and regulations in relation to the removal/disposal
of waste including hazardous waste and may be required to satisfy the Auctioneer in relation to their
disposal/removal procedures. Where waste materials are removed all work must be undertaken by an
approved and licensed contractor.
19. Where the Bidder loads any item of plant, machinery or equipment contained in a lot or lots to remove it
from the site, the Auctioneer shall be under no liability whatsoever to the Bidder or any third party for
any damage however so caused by the removal and the Bidder shall be responsible for and indemnify
the Auctioneer against any damage or loss which the Auctioneer may suffer or incur in respect of loss,
damage or injury suffered by the Bidder’s employees or any third party arising from the removal of the
plant, machinery or equipment. The Bidder shall indemnify the Auctioneer against any loss damage
suffered by the Auctioneer which directly or indirectly is attributable to the nature of the plant,
equipment or machinery acquired by the Bidder whether through breakage rust decay, desiccation,
leakage wastage, inherent or latent defect or vice or nature deterioration.
20. The Bidder acknowledges that any software or intellectual property rights attaching to a lot or lots may
not be the property of the Vendor or capable of transfer by the Vendor and that neither the Vendor nor
the Auctioneer is in any way authorising the use by the Bidder of such software or intellectual property
rights and that according any use of such software or exploitation of such intellectual property rights
shall be at the Bidder’s sole risk.
21. These Terms shall be governed by and construed in accordance with the laws of England and any
disputes will be decided only by the English courts.

NOTICE TO PURCHASERS
1. Useful Tel. No’s Site Manager: John Overton Tel. +44 (0) 7899 833 983
Auction Accounts: Tel +44 (0) 20 7098 3700 Fax +44 (0) 20 7098 3795
2. Directions: From the North:
Exit M1 Motorway at Junction 28 onto the A38 (signposted Derby). Continue until
junction with the A610 (signposted Ripley / Ambergate). At the roundabout take the
A610 signposted to Ambergate. Continue for approximately 1 mile turn left at
excavator public house (signposted Heage / Belper – B6013). At ‘T’ Junction (with
White Hart Public House on the left) take the right turn and follow B6013 to Belper.
After a sharp left hand turn take the left hand slip road into Penn Street. Pennant
Clothing Ltd can be found immediately on your right hand side.
From the South;
Exit M1 Motorway at Junction 26 onto A610 (signposted Ripley). Continue for 7.7
miles until traffic lights in Codnor. Turn right and continue on A610 (signposted Ripley /
Matlock). After 1.4 miles turn right at roundabout and straight on at 3 rd roundabout. At
next roundabout take the A610 signposted to Ambergate (passing under the A38).
Continue for approximately 1 mile turn left at excavator public house (signposted
Heage / Belper – B6013). At ‘T’ Junction (with White Hart Public House on the left)
take the right turn and follow B6013 to Belper. After a sharp left hand turn take the left
hand slip road into Penn Street. Pennant Clothing Ltd can be found immediately on
your right hand side.
3. Viewing: The Lots may be viewed Monday 7 th June 2004 between the hours of 9:30am to
4:30pm and throughout the sale or if necessary by prior appointment.
4. Refreshments Light refreshments will be available at the sale.
5. Sale Procedure: All Attendees must register giving their full United Kingdom address and telephone
number. All attendees will be asked for secondary forms of identification i.e. Driver’s
License, Bank Reference, etc. Following the completion of registration procedures a
bid card will be issued under which purchases will be made. You are responsible for all
bids made under this number. IMPORTANT – Once a bid number is issued you will
have signed to acknowledge the conditions under which your bid is accepted. If in
doubt, these conditions are available in the catalogue, on the sale site or at any of the
Henry Butcher International Limited Offices.
6. Buyers Premium: The Buyer will pay to the Auctioneer a premium of 12.5% on the “Hammer Price” to
which will be added Value Added Tax at the current rate. The Premium is not
negotiable and is payable by all purchasers. The Auctioneer, when acting as Agent for
the Seller, may also receive Commission from the seller. All items purchased through
the Webcast Facility are subject to a Buyers Premium of 16%.
7. Terms: ALL MONIES DUE MUST BE PAID ON OR BEFORE WEDNESDAY 9 TH JUNE 2004
ON SITE OR AT A HENRY BUTCHER OFFICE. LOTS MAY ONLY BE COLLECTED
UPON RECEIPT OF CLEARED FUNDS:
Cheques and Bank Drafts should be made payable to “Henry Butcher
International Ltd”
Cash, Telegraphic Transfer:
Bank details for telegraphic transfer:
Account: Henry Butcher Client Account 3
Account Number: 2042 0603
Sort Code: 20-37-75
Bank: Barclays Bank Plc

Bank Address: Barclays Bank Business Centre
99 Hatton Garden
London EC1N 8DN
International Swift Code: BARCGB22
8. Deposits:
Bankers Draft, Building Society cheque - which will be subject to verification.
Cheques – cheques not accompanied by a letter from your bank stating the amount to
which your cheque will be honoured will be subject to a special clearance surcharge of
£10.00.
WE DO NOT ACCEPT CREDIT OR DEBIT CARDS
In accordance with The Auction Conditions of Sale the Auctioneer reserves the right to
request a deposit to be paid. Non UK buyers must lodge a £500 cash deposit with the
Auctioneer prior to registration. See Notice No. 17 on Motor Vehicles.
9. Buying Order: For the convenience of buyers who may wish to make purchases, but who do not wish
to attend the sale, the auctioneer will arrange to bid on their behalf. Please complete
the form at the rear of this catalogue. The Auctioneer shall not be liable for any
neglect, default or failure in executing bids. There is a minimum bid of £25.00 per lot
and viewing is strongly recommended.
10. Risk: The Bidder is on risk once the hammer falls and is strongly advised to effect insurance
at once.
Purchasers should note that all Henry Butcher lot display boxes are for display
purposes ONLY. They are not intended for transportation of contents.
11. Clearance: All lots to be cleared without fail by Friday 18 th June 2004. Any lots not cleared Friday
11 th June 2004 will be subject to progress chasing. Purchasers of retained lots will be
notified as and when lots become available. You should ensure that any haulier holds
sufficient insurance cover for ‘Public Liability and Goods in Transit.’ Copies of the
insurance cover should be made available to Henry Butcher Site Supervisor before
removal of goods from site.
Note certain Lots may be available for clearance during the auction at the discretion of
the Site Manager upon receipt of funds.
The premises will be open 9.00am to 4.30pm Monday to Thursday and 9.00am to
3.00pm Friday.
Health & Safety
Depending on the size of the removal programme, it may be that certain projects will
come under the Health & Safety Executive (HSE) assuming the role of the client under
Construction, Design, and Management Regulations 1994 (CDM). This will be where
walls, roofs, or major structural movement may take place. Any plant movement
involving more than a “Lift & Shift” situation needs to be referred to Henry Butcher
International Health & Safety Officer before a “Permit to Work” is issued.
Clearance of all Lots must be undertaken in accordance with current Health and Safety
at Work Regulations and, where necessary, Construction, Design, & Management
Regulations 1994 (CDM). You may have to provide a “Work Method Statement” and
“Risk Assessment” approved by a Henry Butcher Health and Safety Officer via the site
supervisor, prior to the removal of any Lots. Henry Butcher reserve the right to halt
clearance if they feel in their opinion, it is being carried out in an unsafe manner or
without an approved “Method statement” and “Risk assessment”, as stated.
Disconnection/ Oil / Liquid Removal
Electrical disconnections from the MAINS supply are the responsibility of the
purchaser, unless stated otherwise, and MUST be carried out by an Approved
Electrician.

Any fluids remaining in the machine at the time of purchase are the responsibility of the
purchaser and MUST be removed from site to conform with “COSHH” (Control of
Substances Hazardous to Health) regulations.
12. Buyers Choice Where similar lots are indicated in the catalogue the Auctioneer may offer Buyers
Choice. This allows the successful bidder to choose which (or all) lots in a given run
they would like on a per lot basis taken either in or out of sequence.
13. Transfer of Lots The Auctioneer will only accept payment from and permit removal of lots purchased by
the Purchaser successfully bidding at the sale or its agent acting for the purchaser.
14. Value Added Tax Purchasers will be charged Value Added Tax at the current rates on the amount of their
purchases and the buyers premium.
15. Recording Please note this sale is recorded and we reserve the right to use the recordings to
assist with resolving disputes or legal issues as appropriate.
16. Conditions of sale The attention of Purchasers is drawn to the Conditions of Sale included in this
Catalogue
17. Motor Vehicles Purchasers must satisfy themselves and make their own arrangements to ensure
that any vehicles purchased comply with the 1991 Road Traffic Act as well as
any current Road Traffic Legislation. All purchasers will sign an indemnity form
prior to removal and Henry Butcher make no claim or warranty as to the
roadworthiness of any vehicle.
Recorded mileage’s are only given for information purposes and must not be relied
upon as indicating the actual mileage run by any vehicle.
Unless prior arrangements are made with the auctioneers a deposit, the greater of
£250 or 10% of the bid price will be required from the purchaser at the fall of the
hammer.
No vehicles can be collected until the auctioneers receive cleared funds in full.
18. Purchase of The Auctioneers draw to the attention of buyers contemplating purchasing goods
goods through a through a finance company that arrangements should be made well in advance
Finance Company of the Sale so they may make payment in accordance with the Conditions of Sale.
19. Indivisible Loads Successful Purchasers must obtain the necessary permission (i.e. Police, Ministry of
Transport, Local Authority) to transport off site loads (long/wide loads) within sufficient
time prior to the commencement of clearance of those items, in order to comply with
the clearance period as stated in the Notice to Purchasers.
20. Overseas Purchasers
Overseas Purchasers must register showing or providing details of:
1) Their passport(s).
2) One other method confirming their identity, i.e. drivers licence, name, address, UK
Agent (if any), telephone and fax numbers.
3) Full details of their National Bank and their UK corresponding bank.
4) Details from their bank confirming method of payment etc.
Please also ensure that:
5) Your country, or the country to which the items are destined, holds no import
restrictions on the goods that you wish to purchase.
6) The country has no import licence restrictions or a restriction on currency allocation.
7) The country has no prolonged inspection procedure which might cause excessive
delay in allowing your goods to be imported.
8) You receive a fully-descriptive invoice in order that you may arrange payment as
soon as possible with our bank. Barclays Bank Plc, Barclays Bank Business Centre,
99 Hatton Garden, London EC1N 8DN.

9) You employ a reputable freight-forwarding organisation. Please note that many of
the machinery removal companies in this country are not necessarily freight
forwarders. We will be pleased to advise accordingly.
10) You have read the Conditions of Sale
21. Please Note: a) We cannot allow removal of any Lot from the Auction Site until our Accounts
Department has received notification from our bankers a) that your payment has been
properly cleared in full. Monies must be transferred to ourselves within the time stated
in the “Notice to a) Purchasers” on the preceding page.
b) If there are any special arrangements that you wish to make with us, you must
contact us at least three days before the Sale date.
c) VAT PAYMENT AND RETURNS
Non EEC Purchasers:
All non EEC Purchasers will be charged VAT at the current rate on each Lot
purchased. This will be refunded to you as soon as we receive a copy of the bill of
lading as proof of export. We are unable to refund the VAT on the Buyers Premium
EEC Registered Companies:
Non United Kingdom based companies registered in the European Economic
Community are exempt from VAT except on the Buyers Premium element, subject to
receipt of the following information:
i.. Company name and address.
ii. Telephone / Fax Number
iii. Contact Name / Position
iv. VAT Number
v. The number allocated to you for intra-EC trade (where applicable)
vi. A letter of assurance from a freight forwarder confirming that they will provide
satisfactory documentation proving export.
The above information must be supplied in writing to our office: New London Bridge
House, 25 London Bridge Street, London, SE1 9BQ. For the attention of Miss Vicky
Thomas on your official Company notepaper and signed by the contact name quoted.
FAILURE TO CONFORM TO ALL OF THE ABOVE WILL RESULT IN VAT BEING
LEVIED AND REFUNDS ONLY BEING MADE UPON RECEIPT OF SATISFACTORY
EXPORT DOCUMENTATION.
If you intend to export your purchases using your own transport (either by Sea or Air)
then VAT will be levied and refunded upon receipt of satisfactory documentation.
Henry Butcher reserve the right to refuse to accept the bid of any attendee
should they be unable to satisfy Henry Butcher on any of the above.

WEBCAST BIDDING
REGISTRATION
1. Go to www.goindustry.com. You will see the “Pennant Clothing Limited” sale listed on the home
page.
2. Click the link for “Pennant Clothing Limited” sale and you will be transferred to the auction list.
3. Select the ‘‘register here’’ option and then complete the registration form. Please ensure that you
read and accept the Terms and Conditions of sale.
4. As part of the approval process you are requested to fax the fully completed ‘’Payment Details’’ form
to Henry Butcher at the following no: +44 (0) 207 098 3796.
5. Upon approval you will receive an email confirming your participation and containing instructions for
the bidding via the GoIndustry Webcast
PROXY BIDS/ABSENTEE BIDS
Once you have been approved you will have the opportunity to place proxy bids. To do this, please
follow these instructions:
1. Click on the link for proxy bidding that is contained in your approval e-mail.
2. Login using your username and password.
3. Go through the list of lots and enter your bid in the field to the right of the lot description.
4. Activate the ‘’Save’’ button to save your entries before moving on to the next page of lots.
5. When you are finished entering your proxy bids activate the ‘’Submit Proxy Bids’’. This information
will then be sent to GoIndustry.
6. Please note proxy bidding will be available until 18.00pm BST on the day prior to the start of auction.
ON THE DAY OF SALE
1. Go to www.goindustry.com you will see the “Pennant Clothing Limited” listed on the home page.
2. Click on the link for the “Pennant Clothing Limited” sale and you will be transferred to the auction list.
3. Select the ‘’Login’’ option. This will take you to the login page where you should enter your
username and password.
4. Following from this, a small Java applet (a computer application needed to run WebCast) will be
downloaded onto your computer.
5. Before the Java applet begins to download, you will be asked to accept a certificate of authenticity
from GoIndustry. This assures you that the applet has been sent directly from GoIndustry and is
safe to run on your computer. After clicking on ‘’accept”, the applet will be downloaded and started.
6. You will now see the bidding applet on your screen.
7. There are 2 ways to place a bid:
a. Activate the ‘’Place Bid’’, to place a bid in relation to the auctioneer’s increment.
b. Enter your bid amount in the field and then activate the ‘’Place Bid’’ button.
8. For more detailed bidding instructions we recommend you read the Webcast instructions that you
will find on www.goindustry.com on the auction-listing page in the section ‘’WebCast Instructions’’.
AFTER THE SALE
You will receive your invoice confirming your purchases by fax on the day after the sale. All items
purchased through the Webcast Facility are subject to a Buyers Premium of 16%.
IMPORTANT NOTE:-
The Internet is not foolproof and a number of factors such as the speed of your modem, the
amount of traffic being carried by your service provider and even the integrity of the telephone
connection can affect how you are able to view the sale.
Whilst all efforts have been made to ensure fast data transfer from the site neither Henry
Butcher or GoIndustry can accept responsibility for equipment failure or loss of connection from
the site.
For all other technical enquiries relating to Internet bidding contact:
Henry Butcher IT Support: +44 (0) 20 7098 3793
Webcast Payment Enquiries: +44 (0) 7775 697 533

FORTHCOMING ONLINE SALE – SALE ENDS TUESDAY 20 TH JULY 2004
ASSETS TO INCLUDE:
CUP SEAMING MACHINES
Bonis SK51 “Never Stop” Cup Seaming Machine
Rimoldi COV/Gro Cup Seaming Machine
Rimoldi 053/00/03 Cup Seaming Machine
Rimoldi 155/00/02 Cup Seaming Machine
Rimoldi Cup Seaming Machine (Qty 3)
Rimoldi 33-Cup Seaming Machine
OVER LOCKING MACHINES / BAR TACKING MACHINES
Rimoldi ‘327’ Over Locking Machine (Qty 2)
Brother ‘EF4 B438-7’ Over Locking Machine
Brother ‘EF4 B531’ Over Locking Machine
Brother ‘LK3 B430-4’ Bartack Machine (Qty 3)
Brother ‘LK3 B438-2’, ‘LK3 B826’ & ‘LK3 B432’ Bartack Machines (Qty 3)
BUTTON SEWING MACHINES / TABBING MACHINES
Brother LK3 B438-2 Button Sewing Machine
Brother LK3 B438-7 Button Sewing Machine
Union Lewis ‘160-20’ Tabbing Machine (Qty 7)
BUTTON HOLER MACHINES
Juki ‘LBH783’ Button Holer Machine (Qty 4)
PROGRAMMABLE LOCKSTITCH MACHINES / BLINDSTITCH MACHINES
Juki ‘DDL-5550-4’ Programmable Lockstitch Machine with Juki E.C. 121. Pattern Control (Qty 5)
American ‘G615’ Blindstitch Machine
Strobel ‘K170Y1FD’ Blindstitch Hemming Machine
Lilliput Cording Machine on stand (Qty 4)
LINKING MACHINES
ARNDT Technic Mock Linking Machine with Rimoldi 264/00/1Ma-25 Head (Qty 2)
ARNDT Technic Mock Linking Machine with 264/00/1MA 24 Head.
ARNDT Technic Mock Linking Machine with 261/38/2MD07 Head.
ARNDT Technic Mock Linking Machine with Rimoldi 261/30/3mr/27 Head.
STEAM PRESSES
IBIS ‘HF59’ Steam Press with ‘T460’ Timer, 900mm & 1800 mm (Qty 3)
IBIS ‘18/8’ Steam Table
Veit Ironing Table and Iron with ‘2335’ Steam Boiler
IBIS Ironing Tables with Irons (Qty 2)
INOX ‘1199’ Ironing Tables with Electrolux Orton Steam Boiler and Irons (Qty 2)
Large Quantity of Garment Stretching Frames
Dromack Spot Cleaning Table With Extraction
Superlite Illuminated Full Garment Examining Machine with Rise and Fall Centre Panel (Qty 7)
CAB ‘ Apollo 3’ Label Printer with Keyboard
Kennett Lasser Size 12 Tailors Dummy

MISCELLANEOUS
Large Quantities of Operators Mobile Work Piece Stands, Packing and Inspection Benches, Mobile Fibre
Body Work Bins, Mobile Garment Rails, Operators Chairs etc.
COMPRESSOR
Fluid Air ‘Rotopak 47’ Packaged Air Compressor
Ingersoll Rand ‘TMS’ Air Drier
OFFICE FURNITURE / BUSINESS EQUIPMENT
Range of Desks, Filing Cabinets, Meeting Room and Reception Furniture, Personal Computers and
Printers
For Further Information visit our website www.henrybutcher.com
Or contact – Jonathan Saville +44 (0) 7774 652404 – jonathan.saville@henrybutcher.com

CANTEEN
1 A Double Door Steel
Storage Cabinet 900 x 450
and a Glass Fronted Notice
Board 1240 x 940mm High
2 A Proline Refrigerator and
One Other
3 A Vestfrost Chest Freezer
1550 x 600 x 840mm High
4 A Moorwood & Vulcan
'6510670' Grey Enamel
Gas Heated Grill on a
Stand
5 A Moorwood & Vulcan
'COL07' Gas Heated 10
Burner Double Oven
Stainless Steel Cooking
Range
6 A Casio 'CE3410' Cash
Register with Change
Display, Receipt Print Out
and a Wrapmaster '3000'
Film Dispenser
7 Two Mobile Stainless Steel
Kitchen Trolley's
8 A Quantity of Cooking
Utensils, Crockery, Cutlery,
Wall Clock, etc.
9 Five Canteen 4 Seater
Units (Located Backwinder
Room)
10 A Classic 'Tribune'
Unvented Hot Water
System and a Redring
Hand Drier
11 A Double Sink, Double
Drainer Stainless Steel
Sink Unit with Undershelf
1740 x 610 x 900mm High
12 A Preparation Table
Stainless Steel Top with
Can Opener 1830 x 610 x
750mm High
13 A Potato Peeling Machine
and a Scarbrow Potato
Chipper on a Stainless
Steel Table
14 A Moorwood & Vulcan
'AMV/4920' Gas Heated
Six Pan, Two Door
Stainless Steel Serving
Unit
15 A Imperial Gas Heated
Twin Basket Stainless
Steel Deep Fat Fryer 400 x
760 x 1200mm High
16 - 19 Blank Lot
SEWING MACHINES
20 A Juki 'LBH783' Button
Holer Machine S/n
XD45619
21 A Brother 'LK3 B430-4'
Bartack Machine S/n
44590380
22 A Brother 'LK3 B438-2'
Button Sewing Machine
S/n 148582897
23 A Brother 'EF4 B531'
Overlocking Machine S/n
531302
24 A Similar Lot
25 A Brother 'LK3 B826-5'
Bartack Machine S/n
229969
26 A Brother 'LT2 B832-405'
Twin Needle Flat Stitch
Machine S/n A2570876
27 A Union Lewis '160-20'
Tabbing Machine S/n
1757378
28 - 31 A Similar Lot
32 A Union Lewis '160-20'
Tabbing Machine (Spares)
S/n 1496410
33 A Union Special '39500AW'
Overlocking Machine S/n
1269193
34 A Rimoldi 'COV1GRD' Cup
Seaming Machine S/n 864
35 A Rimoldi '155/00/02' Cup
Seaming Machine S/n 426
36 A Rimoldi Cup Seaming
Machine S/n 18
37 A Similar Lot
38 A Rimoldi '155/00/01' Cup
Seaming Machine S/n
415329
39 A Similar Lot
40 Blank Lot
41 A Rimoldi Cup Seaming
Machine S/n 218947

42 A Rimoldi '055/COV' Cup
Seaming Machine S/n
86632
43 A Rimoldi '263-46-3MD-05'
Twin Needle Flat Stitch
Machine S/n 646127
44 A Juki 'DDL5550-4'
Programmable
Lockstitch Machine with
Juki 'EC-121' Pattern
Control S/n 23137
45 A Mathbirk 14 Point, 21
Gauge Single Needle Neck
Linker
46 A Similar Lot
47 A Mathbirk 20 Point, 30
Gauge Single Needle Neck
Linker S/n 7962
48 - 56 A Similar Lot
57 A Mathbirk 20 Point, 30
Gauge Single Needle Neck
Linker (Heads Only) S/n
7974 & 7963
58 A Complett '66' 22 Point,
30 Gauge Single Needle
Neck Linker
59 A Similar Lot
60 A Complett '66' 20 Point,
30 Gauge Single Needle
Neck Linker
61 A Complett '66' 14 Point,
21 Gauge Single Needle
Neck Linker
62 A Complett '66' 20 Point,
30 Gauge Single Needle
Neck Linker
63 - 66 A Similar Lot
67 A Complett '66' 20 Point,
30 Gauge Single Needle
Neck Linker (Incomplete)
68 A Complett '66' 14 Point,
21 Gauge Single Needle
Neck Linker
69 - 71 A Similar Lot
72 A Quantity of Neck Linking
Machines (Spares and
Repairs)
73 An ARNDT-Technic Mock
Linking Machine S/n 277
With Rimoldi '264/00/1MA-
25' Head
74 A Similar Lot
75 An ARNDT-Technic Mock
Linking Machine S/n 298
With Rimoldi '261/30/3MR-
27' Head
76 An ARNDT-Technic Mock
Linking Machine With
Rimoldi Head
77 - 78 A Similar Lot
79 A Fusion Press
CNC EMBROIDERY
MACHINES
80 A TAJIMA 'TMEF-HC912'
12 HEAD, 9 THREAD
CNC EMBROIDERY
MACHINE WITH DROP
TABLE S/n 1017-2-1D
(1992)
81 A BARUDAN 'BEJM
U.F.8' 8 HEAD, 5 THREAD
EMBROIDERY MACHINE
WITH UNITECH
CONTROLLER (1982)
FULLY FASHIONED
KNITTING MACHINES
82 A Bentley Cotton 'AE'
Fully Fashioned Knitting
Machine, 12 Section, 30"
x 30g, Welt, 3 Colour
Stripe With PC Control
S/n 1663
83 A Bentley Cotton 'AE'
Fully Fashioned Knitting
Machine, 12 Section, 32"
x 30g, Welt, 3 Colour
Stripe, Lace and Cable
With PC Control S/n 2672
84 A Bentley Cotton 'AE'
Fully Fashioned Knitting
Machine, 12 Section, 32"
x 30g, 3 Colour Stripe
With PC Control S/n 2618
85 A Bentley Cotton 'AEF'
Fully Fashioned Knitting
Machine, 12 Section, 32"
x 30g, Welt, 3 Colour
Stripe With PC Control
S/n 20132

86 A Bentley Cotton 'AE'
Fully Fashioned Knitting
Machine, 12 Section, 32"
x 30g, Welt, 3 Colour
Stripe With PC Control
S/n 2150
87 A Bentley Cotton 'F' Fully
Fashioned Knitting
Machine, 6 Section, 32" x
21g, Welt, 3 Colour
Stripe, Lace, Cable With
PC Control S/n 7230
88 A Bentley Cotton 'AET'
Fully Fashioned Knitting
Machine, 8 Section, 32" x
21g, Welt, 3 Colour Stripe
With PC Control S/n 3134
89 A Bentley Cotton 'AET'
Fully Fashioned Knitting
Machine, 16 Section, 32"
x 21g, Welt, 3 Colour
Stripe With PC Control
S/n 3533
90 A Monk Fully Fashioned
Knitting Machine, 16
Section, 32" x 21g, Welt,
3 Colour Stripe, Lace and
Cable With PC Control
S/n 10081
91 A Monk Fully Fashioned
Knitting Machine, 12
Section, 32" x 21g, Welt,
3 Colour Stripe, Lace,
Cable With PC Control
S/n 10069
92 A Monk Fully Fashioned
Knitting Machine, 12
Section, 34" x 21g, Welt,
3 Colour and Asemetrics
S/n 10062
93 - 94 Blank Lot
95 A Scheller Fully
Fashioned Knitting
Machine, 4 Section, 36" x
18g Intarsia, Welt, Tartan
With PC Control S/n 2696
96 A Similar Lot
RIB LOADING MACHINE
97 A PROTTI 'P500D' RIB
LOADING MACHINE,
100CM BED, 30GG/18 S/n
43037783 (2001)
98 - 101 Blank Lot
KNITTING MACHINES
102 A Protti 'P222' CNC Flat
Bed Knitting Machine, 18
Gauge, 218cm Bed S/n
75368682 (2000)
103 A Protti 'PT242' Flat Bed
Knitting Machine, 5
Gauge, 218cm Bed S/n
07744351 (1999)
104 A Protti 'PT221' Flat Bed
Knitting Machine, 12/10
Gauge, 213cm Bed S/n
24451952 (1995)
105 A Similar Lot
106 A Protti 'PT22' CNC Flat
Bed Knitting Machine, 12
Gauge, 203cm Bed S/n
82151922 (1992)
107 - 108 A Similar Lot
109 A Protti 'PT22' CNC Flat
Bed Knitting Machine, 14
Gauge, 203cm S/n
86451903 (1990)
110 A Similar Lot
111 A Protti 'PT22' CNC Flat
Bed Knitting Machine, 12
Gauge, 203cm Bed S/n
82051922
112 A Steiger Vesta '3.120'
Flat Bed Knitting
Machine, 10 Gauge,
120cm Bed S/n 4346
(1995)
113 A Steiger Vesta '3.120'
Flat Bed Knitting
Machine, 5 Gauge, 120cm
Bed S/n 3729 (1994)
114 A Steiger Vesta '120' Flat
Bed Knitting Machine, 8
Gauge, 120cm Bed S/n
3796 (1992)
115 A Steiger Vesta '1+1 130'
Flat Bed Knitting
Machine, 12 Gauge,
130cm Bed S/n 5763
(1999)
116 A Steiger Vesta '2x3'
Twin V Flat Bed Knitting
Machine, 12 Gauge,
115cm x 2 S/n 4573
(1996)
117 - 122 A Similar Lot

123 A Steiger Vesta '2x3'
Twin V Flat Bed Knitting
Machine, 10 Gauge,
115cm x 2 S/n 3596
(1996)
124 - 126 A Similar Lot
127 A Steiger Vesta '2x3'
Twin V Flat Bed Knitting
Machine, 8 Gauge, 115cm
x 2 S/n 4057 (1995)
128 A Similar Lot
129 A Computer Programming
System (For Steiger Vesta)
130 - 131 A Similar Lot
132 A Steiger Electra '6FF'
CNC Twin V Flat Bed
Knitting Machine, 8
Gauge, 2 x 150cm Bed
S/n 351691
133 - 134 A Similar Lot
135 A Steiger Electra '4' CNC
V Flat Bed Knitting
Machine, 12 Gauge,
228cm Bed S/n 2131
(1987)
136 A Computer Programming
System (For Steiger
Electra)
137 A Computer Programming
System Tester
138 Blank Lot
139 A Shima Seiki '122CS'
CNC V Flat Bed Knitting
Machine, 5 Gauge, 122cm
Bed S/n 51425 (1994)
140 A Similar Lot
141 A New Super Micro
Complete Programming
System with a Tablet (For
Shima Seiki)
142 A Stoll 'DSTRI Selectaknit'
CNC V Flat Bed Knitting
Machine, 7 Gauge,
2000mm Bed S/n 2709662
143 A Stoll 'DSTR 200/10' V
Flat Bed Knitting Machine,
2700mm Bed, 10 Gauge
S/n 330750
144 A Stoll '220' V Flat Bed
Knitting Machine, 12
Gauge S/n 6806621
145 - 146 A Similar Lot
147 A Dubied 'DRC2' V Flat
Bed Knitting Machine, 14
Gauge, 170cm Bed S/n
345796
148 A Dubied 'NHF2' Hand
Flat, 12 Gauge, 100cm
Bed S/n 546045
149 Blank Lot
STRAPPING MACHINES
150 A Scomar 'BC' Strapping
Machine, 36cm Bed, 5
Gauge S/n 4210 (1987)
151 A Steiger 'TMA4' Strapping
Machine, Twin Bed, 8
Gauge, 20cm x 2 S/n 1809
152 A Steiger 'TM4' NPI 12
Strapping Machine S/n
91777
153 A Steiger 'TM9' NPI 8
Strapping Machine S/n
78977
154 A Tortex Engineering
Strapping Machine
155 A Dubiet 'MRF10' 2.T.J25
Strapping Machine
156 - 157 A Similar Lot
158 A Universal '12/21'
Strapping Machine
159 A Hosiery Equipment
Limited Air Tensioner S/n
1008
160 - 163 A Similar Lot
164 Four Lilliput Roulo Machine
165 Ten Operators Mobile
Work Piece Stands
166 - 190 A Similar Lot
191 Six Rolls of Woven Cotton
and 1 Roll of Black Velour
192 A Superlite Illuminated Full
Garment Examining
Machine with Rise and Fall
Centre Panel
193 Ten Mobile White Garment
Rails
194 - 195 A Similar Lot
196 An Electronic LED
Production Target Board

197 A 56 Drawer Steel Storage
Unit
198 A Wooden Operators
Bench with a Lightbox
199 - 201 A Similar Lot
202 Four Wooden Operators
Benches
203 - 204 A Similar Lot
205 A 24-Compartment Glass
Fronted Yarn Storage
Cabinet
206 A Tardis Style Wooden
Phone Booth
MECHANICS ROOM -
KNITTING ROOMS
207 A Wooden Bench with a
Record No.3 Vice and a
Wolf Double Ended
Grinder
208 A 90-Drawer Steel Storage
Unit with a Large Quantity
of Knitting Machine Spares
209 Two 2-Door Steel Lockers
and a Eighteen Hole
Storage Rack with
Contents
210 A Maier & Sohne 'UTT68'
Needle Grinding Machine
S/n 8653
211 Blank Lot
BACKWINDING SHOP
212 An Avery 'L101' Digital
Platform Scale to Weigh
150kg (55cm x 50cm
Platform)
213 Blank Lot
214 A Moss 4-End Backwinder
S/n 032 (1982)
215 A Similar Lot
216 A Moss Single End
Backwinder S/n 067 (1985)
217 A Motocono 16-End
Backwinder
218 A 16-End Backwinder
219 A Diffused Fan
220 A Pakseal 'AS210' Parcel
Strapping Machine S/n
1447
221 Blank Lot
222 An Avery Mobile Dial Type
Scale to Weigh 50kg
(110lbs)
BACKWINDING STORES
223 - 224 A Similar Lot
225 A Vacuum Pump
226 A DCE 'Unimaster
UMA154K3' Dust
Extraction Unit with
Memrex Explosion
Membrane
227 A Strobel 'KL70-11F0'
Blindstitch Hemming
Machine with Erka
'Variostop Motor' S/n
147029-8
228 - 231 Blank Lot
ENGINEERS WORKSHOP
232 A Jones & Shipman '540'
Surface Grinder with
Magnetic Chuck
233 A G.V.A '1.A Series 3'
Centre Lathe, 30" Between
Centres, 3 Jaw Chuck and
Accessories
234 A Manchester Mechanical
Hacksaw, 18" Blade
235 A 4" Bandfacer Single
Phase
236 A Denbigh Pedestal Drill,
1½" Chuck Cap (Belt
Driven)
237 A Slotter with 10" Rotary
Table v 3 Jaw Chuck
238 A Startrite 'Mercury Mark II'
Pillar Drill S/n 20915
239 A Denbigh Milling Machine
(Belt Driven)
240 A Selecta 8" Double Ended
Grinder S/n BEC53537/95
241 A Master-Mover 'MM5-100'
Battery Operated
Pedestrian Controlled
Towing Vehicle
242 A Key Hydraulic Pallet
Lifter (Cap 34")
243 Blank Lot
244 Three Various 5 Ton Toe
Jacks

245 A Hilmor Pipe Vice Stand
and an Osaki '1202'
Cordless Drill
246 A Gas Bottle Trolley, Pipes
and Gauges
247 A Broomwade Receiver
Mounted Air Compressor
S/n 66796/89 (1956)
248 A Clarke 'Pioneer' Portable
Compressor, 240 Volts
249 - 251 Blank Lot
ENGINEERS WORKSHOP
- STORES
252 A Wooden Glass Fronted
Multi Compartment Multi
Drawer Cabinet, including
Contents, Various
Bearings, etc, 2700 x 160 x
80mm High
253 A Set of Extending Ladders
and a Set of Steps
254 Blank Lot
255 A 60-Drawer Steel Storage
Unit
256 A Similar Lot
257 Three Works Trolleys
258 A Quantity of Bentley
Knitting Machine Spares
on a Trolley
259 A Williams Cotton
Controller
260 A Quantity of Bentley and
Monk Spares on Two
Racks
261 A Quantity of Electrical
Spares on a Rack
262 Two Racks and Contents
including Steel Bar / Rod
etc
263 Two Racks of Fully
Fashioned Knitting
Machine Spares
264 Two Racks and Contents
265 Three Manual Spray Units
266 A 1XL 'Capital' Belt Driven
Lathe with Drive Shaft
267 Blank Lot
268 A Kardex 4-Drawer Safe
File
269 A Kardex 3-Drawer Safe
File
270 A Similar Lot
271 A Lips of London Key
Operated Safe
272 A Similar Lot
273 A Chubb Key and
Combination Operated
Safe
274 A Dudley Key Operated
Safe
275 A Salter '236' 30kg 50g
Hanging Scale
276 An Avery 50kg (110lb)
Platform Scale
277 An Avery 12kg Platform
Scale
278 A Shirley General Purpose
Yarn Fraction Recorder S/n
3369
279 - 281 Blank Lot
COMPRESSOR HOUSE
282 An Ingersoll Rand
'SSR.MH.II' Packaged Air
Compressor S/n 2160116
(1996)
283 A Similar Lot
284 A Fluid-Air 'RotoPak
RP67' Packaged Air
Compressor S/n 31263
285 An Ingersoll Rand 'TMS20'
Air Dryer
286 A Wall Mounted Air Dryer
287 An Abbot Air Receiver
Tank S/n 33995
288 A Similar Lot
289 A Fluidair Rotosave
'RP45L23' Packaged Air
Dryer S/n 18923
GENERATOR HOUSE

290 An E.C.C 'Type BRF 400'
330 KVA Standby
Generator with Rolls-
Royce 8 Cylindrical
Diesel Engine '5500-115'
3 Phase, 400/230 Volt,
476 Amp with Remote
Control Panel by Deep
Sea Electronics Limited
Model 607 S/n A06828/1
291 Blank Lot
YARD
292 A Steel Secure Storage
Jackleg Storage Container
293 A Similar Lot
294 - 299 Blank Lot
END OF SALE

PURCHASERS BUYING ORDER
For the convenience of Buyers who may wish to make purchases, but who do not wish to attend
the sale, the Auctioneer will arrange to bid on their behalf if the orders are sent in on the subjoined
form. A prior inspection on the specified View Days is, however, advised.
The Auctioneers shall not be liable for any neglect, default or failure in executing bids nor any
liability arising thereto.
Date .........................................
To: Henry Butcher
New London Bridge House
25 London Bridge Street
London, SE1 9BQ
Tel: +44 (0) 20 7098 3700
Fax: +44 (0) 20 7098 3795
e-mail: sales@henrybutcher.com
Please bid on our behalf at the below-named sale for any undermentioned lots, at or under the limit
marked against them.
We enclose a cheque for £ ............... being 25% of the estimated amounts of the purchase money,
and in event of you buying any lots for us we undertake to pay for, and remove, the goods in
conformity with the Conditions of Sale and Notice to Purchasers.
Location Town of Sale
Belper, Derbyshire
Date of Sale
Tuesday 8 th June 2004
Lot Description Limit of Price
This order is given on the understanding that a 12½% Buyer's Premium plus Value Added Tax will
be levied on the "Hammer Price" and will be charged over and above the limit placed by you on
this order.
Name .................................................................................
Address .................................................................................
.................................................................................
Telephone ........................................ Signature ...............................................
Fax ……………………………… E-mail: ……………………………......……
A MINIMUM BID OF £25.00 PER LOT WILL ONLY BE ACCEPTED ON THE ABOVE FORM

NOTES
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________
______________________________________