THE HIGH TEMPERATURE ADVANTAGE - Da Miano & Graham

®
®
®
INDUSTRIAL PRODUCTS
CATALOG
THE HIGH
TEMPERATURE
ADVANTAGE

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
THE HIGH TEMPERATURE ADVANTAGE
Since 1978, Zetex and ZetexPlus fabrics, tapes and ropes have been recommended world-wide for shipbuilding,
petro-chemical, power generation, mining, metal refining, and many other industrial applications.
Zetex and ZetexPlus are proven, time-tested textiles:
Zetex products are used for applications up to 1100˚F
(593˚C) and ZetexPlus products are used for applications
to 2000˚F (1093˚C). Materials have an average
K-value of 0.3399 BTU/inch/hr/sq ft/˚F.
Zetex and ZetexPlus are not only high temperature
resistant, but can also withstand cold temperatures
to -100˚F (-73˚C).
High dielectric strength and low constant of 5.9 to 6.4.
Zetex and ZetexPlus fabrics are chemical resistant ~
resisting most acids, alkalies and solvents. The fabrics
are also mildew resistant.
Most fabrics are made from durable texturized
amorphous silica yarns that are twice as strong
as steel wire of same diameter.
Expanded line of coated fabrics have low smoke
emissions and are designed for fabrication.
Aluminized Zetex fabric reflects 90% of radiant heat.
Wide selection of weights, thicknesses, and widths.
Fabrics are UL listed and exceed European EN407
industrial standards.
Made in USA.
ZetexPlus resists burn-through by a continuous
flame. The temperature of the fabric on opposite side
of flame measures only 179˚F (82˚C) with the probe
1 inch from the material.
1
Zetex and ZetexPlus Thermal
Conductivity Vs. Mean Temperature
K Value
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
-100 0
Zetex 2200
ZetexPlus 2200
Zetex 800
100 200 300 400 500 600 700 800 900 1000 1100
Mean Temperature (˚F)
Average Physical Properties
of Zetex Filament
Specific Gravity 2.54
Moh Hardness 6.5
Contact angle with water,
Degrees 0
Coefficient of Friction
with Glass 1.0
Moisture Absobency
(surface), percent
up to 0.3
Moisture Regain
none
Tensile Strength, psi
@ 72˚F 500,000
@ 700˚F 380,000
@ 1000˚F 250,000
Tensile Modulus of
Elasticity,
psi, @ 72˚F 10.5 x 10 6
Hysteresis
none
Creep
none
Elongation at Break,
percent 4.8
Elastic Recovery, percent 100

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
FABRICS Industrial Applications
Newtex Industries offers an expanded line of fabrics for
high temperature applications:
• Zetex and ZetexPlus fabrics are available in a wide
range of weights, widths, and fabric treatments
• Silicone, PTFE, and other coatings
• Aluminum foil and aluminized fabrics
• Wire reinforced fabrics in 3 weights
Newtex makes a wide variety of fabrics
Zetex Fabrics
Product MIL Spec Weight Thickness Width
Description MIL-C-20079 oz./sq yd (inches) (inches)
Zetex 300 HC Class 3 8.5 .020 40, 60
Zetex 400 HC Class 7 12 .030 40, 60
Zetex 600 HC Class 9 18 .035 40, 60
Zetex 800 24 .060 40, 60
Zetex 1000 30 .065 40, 60
Zetex 1200 35 .080 40, 60
Zetex 1350 40 .085 40, 60
Zetex 2200 64 .130 40, 60
Zetex 3400 100 .250 60
Zetex fabrics are available: untreated, heat cleaned/heat treated, and with one-sided treatment
for fabrication.
Zetex fabrics can be dyed orange, red, green, blue or black.
Zetex fabrics are also made in Industrial Grade.
ZetexPlus Fabrics
Product Weight Thickness* Width
Description oz./sq yd (inches) (inches)
ZetexPlus 300 9 .020* 40, 60
ZetexPlus 400 13 .030* 40, 60
ZetexPlus 600 19 .035* 40, 60
ZetexPlus 800 26 .060* 40, 60
ZetexPlus 1000 32 .065* 40, 60
ZetexPlus 1200 37 .080* 40, 60
ZetexPlus 1350 43 .085* 40, 60
ZetexPlus 2200 68 .130* 40, 60
* For base material only.
Above fabrics are also made with Hi-Temp coating.
Zetex 3400 Zetex 600 HC
ZetexPlus 2200 & 1200
2

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
FABRICS Industrial Applications
Silicone Coated Fabrics
Product Weight Thickness Width
Description oz./sq yd (inches) (inches)
Zetex 500 S/S 15 .016 60
Zetex 575 S/S 17 .017 60
Zetex 1085 S/S Gray, Red 32 .035 60
Mats
Product Weight Thickness Width
Description oz./sq ft (inches) (inches)
Zetex Glass Mat 250 3 .250 60
Zetex Glass Mat 500 6 .500 60
Zetex Glass Mat 1000 15 1.00 60
Z-Sil Silica Mat 10 .70 24
Newtex can now supply a full range of insulation
products including 3 weights of silicone fabric.
Newtex now has a glass mat in 3 weights and a
new silica mat for high temperature applications.
PTFE Fabrics
Product Weight Thickness* Width
Description oz./sq yd (inches) (inches)
Zetex 578-1 (PTFE one side) 17 .016 60
Zetex 617-2 (PTFE two sides) 18 .017 60
Zetex 600 Sintered PTFE Coated 19 .035* 60
Zetex 1100 Sintered PTFE Coated 50 .070 60
*For base material only.
Zetex Silicone 500, Zetex Glass Mat, Zetex 600 HC.
Rewettable Adhesive Fabrics
Product Mil Spec Weight Thickness Width
Description Mil-C-20079 oz./sq yd (inches) (inches)
Zetex 300 RW Class 4 or 6 14.5 .035 60
Zetex 400 RW Class 8 22.0 .040 60
Zetex 600 RW 30.6 .048 60
Tacky Gasket Fabric
Product Approx. Weight Thickness Width
Description lbs./linear yd (inches) (inches)
Zetex 1000 5 .065 40
Also available is Zetex 1000 W/Wire tacky gasket fabric.
Zetex 1100 Sintered PTFE and Zetex 617-2 PTFE.
3

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
Aluminum Foil/Aluminized Fabrics
Product Mil Spec Weight Thickness* Width
Description Mil-C-20079 oz./sq yd (inches) (inches)
Zetex 600 Aluminum Foil Class 10 20 .035* 60
Zetex 600 Aluminized 22 .035 40, 56
Zetex 800 Aluminized 28 .060 40
Z-Temp 1000 SCI Liquid Alum. Coating 32 .065* 60
Z-Temp 1200 W/Wire Liquid Alum. Coating 38 .080 60
*For base material only.
Zetex Aluminum Foil and Aluminized
fabrics reflect 90% of radiant heat.
Wire-Reinforced Fabrics
Product Weight Thickness* Width
Description oz./sq yd (inches) (inches)
Zetex 800 W/W 24 .041 60
Zetex 1200 W/W 35 .080 60
Zetex 1400 W/W 44 .090 60
ZetexPlus 800 W/W 26 .041* 60
ZetexPlus 1200 W/W 37 .080* 60
ZetexPlus 1400 W/W 47 .090* 60
*For base material only.
Zetex 800 W/Wire conforms to Federal Specification HH-P-31F. (Each yarn contains two .0045" dia.
wires of 304SS).
Zetex 800 Aluminized
APPLICATIONS
Fabrics Zetex Zetex ZetexPlus Zetex Zetex Zetex Zetex Zetex Zetex Zetex Z-Temp Zetex
Heat Treated ZetexPlus Rewet. Tacky Silicone PTFE Aluminized Alum. Liq. Alum. Z-Sil
Cleaned w/wire Gasket Foil Coating Mat
Expansion Joints, Flue Ducts ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Piping Insulation ■ ■ ■ ■
Elastomer Reinforcements ■ ■
Folded and Rubberized Gaskets
■
Turbine Insulation ■ ■ ■ ■
Laminating
■
Reflective Protection ■ ■ ■
Gas and Liquid Filtration ■ ■ ■
Acoustical Insulation ■ ■ ■ ■
Removable Pads ■ ■ ■ ■ ■ ■ ■ ■
Lagging
■
Insulation Pads ■ ■ ■ ■ ■ ■ ■ ■
Standard roll length is 50 yards. Standard weight and thickness is + or - 10%.
4

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
FABRICS Welding Applications
Newtex introduces an expanded line of fabrics for welding protection and fabrication into
safety blankets, curtains, and shields. These fabrics are designed to protect personnel
and equipment from sparks and molten metal splash for shipbuilding, power generation,
petro-chemical and many other industrial applications.
Z-SIL
Z-SIL is a high silica fabric treated with a proprietary
coating. With a melting point of 3000˚F (1650˚C) and
continuous operating temperatures of up to 1800˚F (980˚C),
it is an ideal material for stress relief and equipment
protection. Z-Sil 600 and 1100 are made from continuous
filament yarns; Z-Sil 1600 is made from texturized yarns.
Z-PRO
Z-PRO fabrics feature an abrasion resistant coating for
tough welding applications that also helps to prevent
wicking. Z-Pro is also available as glass/aramid fabric.
ZetexPlus ®
ZetexPlus is a texturized glass fabric with a proprietary
high temperature treatment.
Z-Shield
Z-Shield fabric is excellent for fabrication. The most
popular color is gold; also available in other colors.
Z-Shield fabric helps to prevent wicking.
Zetex ®
Zetex 800 with bright safety orange color and
Zetex 600, an 18 oz. fabric, are the most
common Zetex fabrics used for welding.
Zetex Salmon
Zetex Salmon is an economical 15 oz. fabric
available in salmon (pink) and black. Other
colors also are available.
Welding Fabrics
Product Weight Thickness* Width Tucked Edges
Description oz./sq yd (inches) (inches) Available
Z-Sil 600 18 .030 35
Z-Sil 1100 34 .050 35
Z-Sil 1600 36 .080 40
Z-Pro 720 25 .035 40, 60, 72 Yes
ZetexPlus 600 19 .035* 40, 60
ZetexPlus 800 26 .060* 40, 60
ZetexPlus 1000 32 .065* 40, 60
ZetexPlus 1200 37 .080* 40, 60
ZetexPlus 2200 68 .130* 40, 60
Z-Shield 730 26 .040 40, 60, 72 Yes
Zetex 600 HT, TR 18 .035* 40, 60 Yes
Zetex 800 TR, Orange 24 .060* 40, 60
Zetex 1000 TR 30 .065* 40, 60
Zetex 1200 TR 35 .080* 40, 60
Zetex 2200 TR 64 .130* 40, 60
Zetex Salmon 15 .017 38, 60
*For base material only.
5

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
ZETEX
Z-SIL Z-PRO Z-SHIELD SALMON
Z-Sil 600 and Z-Sil 1100.
Z-Shield in gold with tucked edges.
Fabrics Welding Spark, Spray Protection Fire, Flame Stress Stress
Curtains Shield Protection Protection Relief Relief
Blankets Arc Flash Barrier to 1100˚F to 1800˚F
Grinding Shield (593˚C) (980˚C)
Z-Sil ■ ■ ■ ■ ■
Z-Pro ■ ■
ZetexPlus ■ ■ ■ ■ ■ *
Z-Shield ■ ■
Zetex ■ ■ ■ ■
Zetex Salmon ■ ■
*ZetexPlus 800 or heavier fabric
APPLICATIONS
6

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
TAPES
Newtex has a wide selection of Zetex and ZetexPlus
tapes for lagging, insulation, and encapsulation. Zetex
tapes can be used up to 1100˚F (593˚C) and ZetexPlus
tapes up to 2000˚F (1093˚C).
Zetex Tape
Product Weight Thickness Width
Description oz./sq yd (inches) (inches)
Zetex 550 13 .030 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 4, 5, 6
Zetex 1000 30 .062 3
⁄4, 1, 1 1 ⁄2, 2, 3, 4, 5, 6
Zetex 2500 60 .125 1
⁄2, 3 ⁄4, 1, 1 1 ⁄2, 2, 3, 4, 5, 6
Zetex 3900 105 .250 3
⁄4, 1, 1 1 ⁄2, 2, 3, 4, 5, 6
Zetex 1000 tape also available in wider widths: 7 1 ⁄2", 8", 9", 10", 11", 12", 13".
Zetex tape in all styles available with pressure sensitive adhesive backing.
Roll length is 100 ft. except for Zetex 3900 which is 50 ft. roll length.
ZetexPlus Tape
Product Weight Thickness* Width
Description oz./sq yd (inches) (inches)
ZetexPlus 550 14 .030* 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 4, 5, 6
ZetexPlus 1000 33 .062* 3
⁄4, 1, 1 1 ⁄2, 2, 3, 4, 5, 6
ZetexPlus 2500 66 .125* 1, 1 1 ⁄2, 2, 3, 4, 5, 6
ZetexPlus 3900 112 .250* 3
⁄4, 1, 1 1 ⁄2, 2, 3, 4, 5, 6
* For base material only.
▲
Zetex and ZetexPlus Tapes
ZetexPlus 1000 tape also available in wider widths: 7 1 ⁄2", 8", 9", 10", 11", 12", 13".
Zetex tape with Hi-Temp coating is also available.
Zetex tape with Hi-Temp coating and ZetexPlus tape are available with pressure sensitive adhesive backing.
Roll length is 100 ft. except for ZetexPlus 3900 which is 50 ft. roll length.
Bolt Hole Tape
Product Weight Thickness* Width
Description oz./sq yd (inches) (inches)
Zetex 700 22 .062 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3
Zetex 1350 39 .125 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3
ZetexPlus 700 24 .062* 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3
ZetexPlus 1350 42 .125* 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3
* For base material only.
Zetex bolt hole tape is also available with pressure sensitive adhesive backing.
Zetex Industrial Grade bolt hole tape is also available.
Roll length is 100 ft.
▲ Zetex 1000 Tape in wider widths
▲
Zetex Tadpole Tape
7
Tadpole Tape
Bulb Diameters (in.): 3
⁄8
1
⁄2
5
⁄8
3
⁄4 1
Overall Widths (in.): 1 1 1 — —
1 1 ⁄4 1 1 ⁄4 1 1 ⁄4 1 1 ⁄4 —
1 3 ⁄8 1 3 ⁄8 1 3 ⁄8 1 3 ⁄8 —
1 1 ⁄2 1 1 ⁄2 1 1 ⁄2 1 1 ⁄2 —
1 3 ⁄4 1 3 ⁄4 1 3 ⁄4 1 3 ⁄4 1 3 ⁄4
2 2 2 2 2
2 1 ⁄2 2 1 ⁄2 2 1 ⁄2 2 1 ⁄2 2 1 ⁄2
ZetexPlus tadpole tape also available.
Roll length is 100 ft.

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
TAPES
Industrial Grade Tape
Style Weight Thickness Width
No. oz./sq yd (inches) (inches)
Zetex 1000 21 .047 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 4, 5, 6
Zetex 2500 39 .110 1, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 4, 5, 6
Zetex 1000 and 2500 Industrial tape also available in wider widths: 7 1 ⁄2", 8", 9", 10", 11", 12", 13".
Zetex Industrial 1000 and 2500 with Hi Temp coating also available.
Roll length is 100 ft.
Rewettable Tape
Style Weight Thickness Width
No. oz./sq yd (inches) (inches)
Zetex 550 16 .035 1, 2, 3, 3, 4, 5, 6
Roll length is 100 ft.
Industrial Grade Bolt Hole Tape
Style Weight Thickness Width
No. oz./sq yd (inches) (inches)
Zetex 700 22 .060 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 4, 5, 6
Zetex 1350 32 .110 1, 1 1 ⁄4, 1 1 ⁄2, 2, 2 1 ⁄2, 3, 4, 5, 6
Roll length is 100 ft.
Wire Reinforced Tape
Style Weight Thickness* Width
No. oz./sq yd (inches) (inches)
Zetex 1400 W/W 44 .090 1, 1 1 ⁄2, 2, 3
ZetexPlus 1400 W/W 47 .090* 1, 1 1 ⁄2, 2, 3
* For base material only.
Zetex tape w/wire is also available with pressure sensitive adhesive backing.
Roll length is 100 ft.
Zetex Industrial Tapes
APPLICATIONS
Zetex ZetexPlus Zetex Zetex
Rewettable ZetexPlus
Wire Reinf.
TAPES
Water and steam piping ■ ■
Hydraulic line protection ■ ■ ■ ■
Boiler tadpole gasket insulation
■
Gasketing or door seals
■
Lagging ■ ■ ■
Electrical insulation
■
BOLT HOLE TAPES
Boiler gaskets ■ ■ ■
Flange gaskets ■ ■ ■
Oil refining, bubble tray gasket ■ ■
8

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
ROPES & TUBING
Twisted, braided, and square braided ropes are used for oven door seals, high
temperature joint packing, hot top seals, and pipe insulation.
Zetex and ZetexPlus tubing is used for high temperature applications to protect
hydraulic or electrical lines and as cable and wire insulation.
Rope
Diameter (inches)
Product 1
⁄4" 3
⁄8" 1
⁄2" 5
⁄8" 3
⁄4" 7
⁄8" 1" 1 1 ⁄4" 1 1 ⁄2" 2" 3"
Twisted Rope
Zetex Approx. Ft./Spool 1275 969 523 305 168 144 114 75
ZetexPlus Approx. Ft./Spool 100 100 100 100 100 100 100 77
Z-Sil Approx. Ft./Spool 969 523 305 168 144 114 80
Braided Rope
Zetex Approx. Ft./Spool 1462 638 426 262 179 110 99 58 37 20 9.5
ZetexPlus Approx. Ft./Spool 100 100 100 100 100 100 100 58 37 20 9.5
Square Braided Rope
Zetex Approx. Ft./Spool 650 459 225 166 128 101 86 36 20
ZetexPlus Approx. Ft./Spool 100 100 100 100 100 100 86 36 20
Knitted Rope
Z-Sil Approx. Ft./Spool 600 400 260 160 120 100 70 60 45
Zetex Rope is sold in 25 lb. spools. ZetexPlus and Z-Sil Rope are sold by LF.
Zetex and ZetexPlus Ropes
Tubing
Diameter (inches)
Product 1
⁄8" 1
⁄4" 3
⁄8" 1
⁄2" 5
⁄8" 3
⁄4" 1" 1 1 ⁄4" 1 1 ⁄2" 2" 3"
Braided Tubing: 1 ⁄16" Wall Thickness
Zetex Approx. Ft./Spool 2525 1275 760 526 435 321 280 240 226 189 104
ZetexPlus Approx. Ft./Spool 100 100 100 100 100 100 100 100 100 100 100
Braided Tubing: 1 ⁄8" Wall Thickness
Zetex Approx. Ft./Spool 631 363 269 250 159 121 100 89 81 54
ZetexPlus Approx. Ft./Spool 100 100 100 100 100 100 100 89 81 54
Zetex Tubing is sold in 25 lb. spools. ZetexPlus Tubing is sold by LF.
APPLICATIONS
Ropes Zetex ZetexPlus Z-Sil
Coke oven door seals ■ ■ ■
Expansion joint packing ■ ■ ■
Furnace door insulation and seals ■ ■ ■
Hot top seals ■ ■ ■
Joint packing ■ ■ ■
Tubing Zetex ZetexPlus
Hydraulic or electrical line protection ■ ■
Severe abrasion applications
■
Cable and wire insulation ■ ■
Hose cover protection ■ ■
9
Zetex and ZetexPlus Tubing
For higher temperature applications, contact
Newtex for twisted and braided ceramic ropes.

UP TO 1100˚F (593˚C)
BELTING
Zetex high temperature belts are used for the transportation
of high temperature glass, plastics, metals, and minerals.
The most popular are aramid belts, with and without
wire. Also available are PTFE coated glass belts with
two types of edges: aramid selvage edge and aramid/
wire selvage edge.
Zetex Belts
Product Thickness Width
Description (inches) (inches)
Zetex 1100 Aramid w/wire .187 1 to 48
Zetex 1200 Aramid w/wire and PAN .187 1 to 48
Zetex 1300 Aramid .187 1 to 48
Zetex 1500 PTFE coated glass, Aramid edge .250 1 to 48
Zetex 1600 PTFE coated glass, Aramid/wire edge .250 1 to 48
APPLICATIONS
Zetex 1500 Zetex 1100 Zetex 1200
Zetex 1600 Zetex 1300
Temperatures 600˚F to 1000˚F ■
Temperatures 800˚F to 1000˚F
■
Temperatures 800˚F to 1200˚F
■
Temperatures are material temperatures, subject to size of hot object and length of belt.
Zetex Belting
YARN & THREAD
Newtex offers an expanded line of texturized yarns as
well as threads.
Zetex Yarn & Thread
Style Number
Description
Yarn
Texturized yarn
8-Cut
Any yield from 3700 yds./lb. to 175 yds./lb. without overspray
With two 304 S.S. wires .0045" diameter (800 yds./lb.)
Thread
N30/3 Aramid Sewing thread (8000 yds./lb.)
N18-PTFE PTFE coated fiberglass sewing thread (2150 yds./lb.)
N24-PTFE PTFE coated fiberglass sewing thread (1600 yds./lb.)
Zetex Yarns and Threads.
10

UP TO 1100˚F (593˚C)
UP TO 2000˚F (1093˚C)
Zetex and ZetexPlus fabrics meet or
exceed one or more of the following
specifications:
■
UL 214 and
NFPA Spec No 701
U®
L
■ UL 723 Flame Spread is 0, Smoke
Density is 0, Fuel Contributed is 0
■ US Coast Guard Spec No 164.009
■
■
■
■
US Military Spec MIL-C-20079
US Military Spec MIL-I-24244 and
NRC 1.36 Spec
European BS EN407 standards
UBC 43-1, NFPA 252, and
California State Fire Marshall
UL Listed
Newtex makes a complete line of high temperature safety
products. Call us for Safety Products Catalog
or visit our web site.
Newtex Industries is a leading integrated manufacturer of high-tech, heat resistant products for industrial and safety markets.
Newtex products, under the Zetex and ZetexPlus brand names, include: heat resistant fabrics, welding fabrics, tapes, ropes, tubings,
high temperature belting, and mat; fire entry, kiln, proximity, and approach suits; gloves, and mitts; aluminized safety clothing; and
theater curtains. Newtex distributes its products to more than 60 countries.
Headquarters: 8050 Victor-Mendon Road, Victor, NY 14564 USA
Tel: 800/836-1001 • Fax: 716/924-4645
E-mail: sales@newtex.com • Internet: www.newtex.com
Western U.S. Office and Distribution Center: 34016 Ninth Avenue South, Building D, Suite 3, Federal Way, WA 98003
Tel: 888/NEWTEX 1 • Fax: 253/838-5603
Asia/Pacific Office and Distribution Center:
Newtex Asia Pacific PTE LTD
BLK 120 Richfield Industrial Centre 01-03
Eunos Ave 7, Singapore 409574
Tel: 65-7481138 • Fax: 65-7480848 • E-mail: thintern@mbox4.singnet.com.sg
Newtex, Zetex, and ZetexPlus are registered trademarks of Newtex Industries, Inc.
Z-Sil, Z-Pro, Z-Shield, and Zetex Salmon are trademarks of Newtex Industries, Inc.
Made In USA
10/98