Kodiak Literature-560kb - Da Miano & Graham

Kit Includes:
(2) Strut 27” to 42”
(2) 15” Extensions
(2) 30” Extensions
(2) Ratchet Straps W/Hook
(2) End Attachments
(1) Carrying Case
P/N: ART.500.100.1
Quick: The Kodiak strut stores in a ready-to-go configuration. Simply add the appropriate extension, set
the positive lock pin after extending the rod, and attach the hook to the vehicle then tighten the ratchet
strap. Each Kodiak strut can be in place and stabilizing the vehicle in less than one minute.
Simple: The end attachment and extensions can quickly be added or removed. Each Kodiak strut has
only one pin making it simple to set up. Each strut can be adjusted from 27” up to 87”. Kodiak struts
are designed to be easy to use and quick to set up.
Lightweight: Kodiak struts are made of a lightweight aluminum alloy. The entire kit weighs less than 50
lbs. Similiar steel kits can weigh up to 140 lbs.
Distributed By:
240 Warren Street
Dayton, Ohio 45402
Tel. (937) 228-2200 Fax (937) 228-3300
http://www.art4rescue.com
e-mail: amres@erinet.com

The Kodiak Vehicle Stabilization System is a tensioned buttress system
for stabilizing side lying and overturned vehicles. The simple design and
rugged construction ensures that the Kodiak VSS will operate under the
worst conditions. Mud, dirt, sand or water will not effect the tool’s operation.
The aluminum and steel construction make the struts durable and
lightweight. In fact, so lightweight that the entire two strut system with
extensions and carrying bag weighs only 49 lbs. Compare that to systems
weighing as much as 140 lbs.
The Kodiak System is designed for quick deployment and set up. Simply
remove a strut from the carrying bag, add an extension if necessary,
extend the adjusting rod, place the
preconnected ratchet belt and hook
and tighten. The entire set up can be
done in less than one minute. The
The Kodiak Vehicle
Stabilization System
Kodiak Vehicle Stabilization System
comes with two 27” to
will allow rescuers to stabilize a vehicle
quickly and efficiently.
with 2” ratchet straps
42” adjustable struts
and hooks. These are
used in conjuction
with 2-15” extensions,
2-30” extensions
and 2 multi-use
heads. These are
used to create the “tensioned buttress” used to stabilize the
vehicle.
The multi-use head is designed to fit into frame holes, along
flat edges and grip into sheet metal. This aluminum head is
anodized red to highlight the contact point of the tensioned
buttress. This head takes the place of the many optional
heads of other systems. With the Kodiak System one head
does the job every time. There is no need to debate over
which head should be used. The multi-use head works in all
situations.
Lightweight Aluminum Construction The positive lock pin on the Kodiak System is designed to
prevent accidental removal. A button on the pin must be
Compact Storage
pushed in order to remove it from the adjusting rod. The pin
is easy to use even with gloves. The positive lock pin is connected
to the strut housing with a PVC coated, stainless
Stores Ready-To-Use
steel lanyard.
Positive Lock Pin for Safety
8”x 8” Non-Slip Base
Contact Your Local Dealer for a Video Demonstration
of the Kodiak Vehicle Stabilization System.
2” Heavy Duty Ratchet Strap with “C” Hook
Each Strut Extends from 27” to 87”