Powermat 1200_EN.pd - Weinig
Powermat 1200_EN.pd - Weinig Powermat 1200_EN.pd - Weinig
Greater utility: All-round machining and sawing in one workstep 36 1 2 1. T slot milling – T slots and other high precisions grooves can be profiled in one operation. With a universal spindle and a PowerLock cutterhead which can be positioned over a range of 360°. 2. Universal spindle – �����������������������������������������duce? In that case the universal spindle would be a useful addition to your spindle arrangement. The universal spindle can be positioned over a range of 360° and can be used as an additional spindle on each side. It is excellently suited for grooves, kerfs and separating work pieces (savings in wood!). 3. Ripping – Planing, profiling and sawing in one operation? Not a problem for the Powermat 1200. The bottom spindle turns your machine into a multi-blade rip saw. The first bottom spindle creates a flat reference surface. The work piece is guided smoothly and accurately during ripping. This increases the service life of the sawblades. 3
Splitting unit – �������������������������������������������������������ability, short setup times and maximum wood yield. The Powermat ����������������������������������������������������������������������� ���������������������������������������������������������������������� ������������������������������������������������������������������������ flat against the guiding surfaces, resulting in significant savings in material. In addition, the rigid design of the PowerLock system ensures excellent �������������������������������������������������������������������� �������������������������������������������������������������������� integrated spray unit the sawblades are kept clean and cool running. This allows the use of thin kerf sawblades to increase the material yield. The splitting wedge is also available as a separate unit. For more information, ��������������������� 37
- Page 3: With wood into the future Solid woo
- Page 7: WEINIG offers more �����
- Page 11: ...when profiling Profitability is
- Page 14 and 15: Profiling: ��������
- Page 16 and 17: Profiling: Expertise in in a big wa
- Page 18 and 19: Window production: Quality begins w
- Page 20 and 21: Window production: A large variety
- Page 23 and 24: Operator-friendly workstation Ultim
- Page 25 and 26: Spindles ��������
- Page 27 and 28: The drive unit of the Powermat 1200
- Page 29 and 30: �����������
- Page 31 and 32: combines the two components into a
- Page 33 and 34: A range without limits: A solution
- Page 35: WEINIG Durofer steel roller, smooth
- Page 39 and 40: The high tech electrics in our moul
- Page 41 and 42: �����������
- Page 43 and 44: as easy to produce an undercut or a
- Page 45 and 46: PowerCom according to the particula
- Page 47 and 48: 6. Operating panel separate from sw
- Page 49 and 50: The control systems: ����
- Page 51 and 52: ation on optimization Setup optimiz
- Page 53 and 54: Memory Plus: Machine management in
- Page 55 and 56: PowerLock: Flexible and fast for hi
- Page 57 and 58: PowerMech: Tailor-made performance
- Page 59 and 60: WEINIG service: Very close to custo
- Page 61 and 62: 026 ����������
- Page 64: MICHAEL WEINIG AG Weinigstrasse 2/4
Greater utility: All-round machining and<br />
sawing in one workstep<br />
36<br />
1<br />
2<br />
1. T slot milling – T slots and other high precisions grooves can be<br />
profiled in one operation. With a universal spindle and a PowerLock<br />
cutterhead which can be positioned over a range of 360°.<br />
2. Universal spindle – �����������������������������������������duce?<br />
In that case the universal spindle would be a useful addition<br />
to your spindle arrangement. The universal spindle can be positioned<br />
over a range of 360° and can be used as an additional spindle on each<br />
side. It is excellently suited for grooves, kerfs and separating work<br />
pieces (savings in wood!).<br />
3. Ripping – Planing, profiling and sawing in one operation? Not<br />
a problem for the <strong>Powermat</strong> <strong>1200</strong>. The bottom spindle turns your<br />
machine into a multi-blade rip saw. The first bottom spindle creates a<br />
flat reference surface. The work piece is guided smoothly and accurately<br />
during ripping. This increases the service life of the sawblades.<br />
3