ZERO OHM COIL

More documents

Recommendations

Info

MKT FILM CAPACITORS MKT capacitors are metallized polyesther flim capacitors. They range both in price and in quality between the low-loss M-CAP and the inexpensive bipolar electrolytic capacitors. The loss factor of an MKT capacitor is about 20 times that of an M-CAP, but less than a tenth of the loss factor of a bipolar electrolytic capacitor. (Loss factor M- CAP: 0.0002, MKT:
BIPOLAR ELECTROLYTIC CAPACITORS A distinction is made in bipolar electrolytic capacitors between two construction types, "rough" and "smooth". "Rough" and "smooth" refer to the aluminium foil used for the winding of the capacitor. In the rough type the foil is roughened to increase the surface area of the foil. As the capacitance of a capacitor is proportional to the surface area, larger capacitances can be achieved in this way with the same material costs. This material saving is at the expense of slightly poorer electrical values. The construction size of rough electrolytic capacitors is significantly smaller. Thus, capacitances of up to 800 µF are available in the BR63 Series. Bipolar electrolytic capacitors are used where large capacitances are required cheaply (series resonant circuits, impedance linearisation, etc.) or where foil capacitors (M- CAP, MKT) are rejected for cost reasons. The higher dielectric strength of the rough type also permits their use where smooth electrolytic capacitors are not surge-proof enough and more expensive foil capacitors are out of the question. D L Technical Specifications: Tolerance : 5% Loss factor Elko smooth : 0.05 Loss factor Elko rough : 0.08 Electrolytic Capacitor, plain foil 50VDC BG50 µF D*L/mm €/Stk 1,00 10*20 1,50 10*20 2,20 10*30 2,70 10*30 3,30 12*30 3,90 12*30 4,70 12*30 5,60 14*30 6,80 14*30 8,20 14*37 10,00 14*37 15,00 18*38 22,00 25*38 33,00 25*38 37
Page 1 and 2: CROSSOVER NETWORK TUNING 3 COILS 5
Page 3 and 4: Crossover Network Tuning Our experi
Page 5 and 6: AIR CORED COILS COILS Air cored coi
Page 7 and 8: Air cored coils with wire diameter
Page 9 and 10: Air cored coils with baked varnish
Page 11 and 12: COPPER FOIL COILS For some time we
Page 13: CFC12 mH Diameter: 44*0.075 mm=3.3
Page 19 and 20: FERRITE COILS Ferrite coils, of whi
Page 21 and 22: 38 FERRITE DRUM CORE COILS Our high
Page 23: FERRIT CORE COILS 56 mm Ø WITH BAC
Page 26 and 27: Transformer core coils with Core 13
Page 28 and 29: Zero Ohm Coil, Core 106 N106 mH OHM
Page 30 and 31: MCAP-SUPREME CAPACITORS The M-CAP S
Page 32 and 33: CAPZN The M-CAP ZN is a tinfoil cap
Page 34 and 35: MCAP The M-CAP is an audiophile met
Page 38 and 39: Electrolytic Capacitor, plain foil
Page 40 and 41: METAL OXIDE FILM RESISTORS MR4 & MR

ZERO OHM COIL

Create successful ePaper yourself

Delete template?

Save as template?