ZERO OHM COIL

MCAP
The M-CAP is an audiophile metallized polypropylene capacitor. In selection of the materials
used, special attention was given to the sound properties. Great care taken during the
production guarantees constant high quality and minimum electrical and mechanical
tolerances. Thus, in the final inspection, maximum deviations in capacitance of 1.5 % are
measured, so the guaranteed value of 3 % is far exceeded. The practically induction-free type
of construction and the low loss factor of the M-CAP results in a very "quick" capacitor. The
M-CAP forms the basis for vivid music reproduction rich in nuance.
The 630 V DC version with capacitances in the range from 0.1 µF to 0.82 µF is equally
suitable as a bypass capacitor in high quality frequency crossovers or as a coupling
capacitance in valve and transistor amplifiers.
400 VDC (330µ=250VDC!)
D
L
Technical Specifications:
Film: metallized polypropylene
Voltage rating: 400-630 VDC
Tolerance : max.3%, typically. 1.5%
Loss factor: tan δ = 0.0002
(for 1kHz/1μF)
MKP-CAPACITOR 400 VDC 3% mcap
µF VDC D*L/mm €/Stk
0,1-0,82 Siehe mcap 630 VDC
1,00 400 13*23
1,50 400 14*23
1,80 400 15*26
2,20 400 16*26
2,70 400 15*28
3,30 400 17*34
3,90 400 18*34
4,70 400 20*34
5,60 400 21*34
6,80 400 23*34
8,20 400 24*37
10 400 26*37
15 400 29*46
22 400 35*46
33 400 38*53
47 400 43*59
56 400 45*66
68 400 47*66
82 400 54*66
100 400 56*72
150 400 62*85
220 400 63*115
330 250 !!!!! 63*115
34