7-Series Instruction Booklet - CTM Homecare Product, Inc
7-Series Instruction Booklet - CTM Homecare Product, Inc
7-Series Instruction Booklet - CTM Homecare Product, Inc
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
7-<strong>Series</strong><br />
<strong>Instruction</strong> <strong>Booklet</strong><br />
TROUBLESHOOTING<br />
Here are some suggestions about solving problems you may have with your scooter. There<br />
is a Self-Diagnostic Warning Light on the Control Panel. To check the Self-Diagnostic<br />
Warning Light, turn on the key and count the number of blinks on the Warning Light.<br />
Number of<br />
Flashes<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
Problem<br />
Battery needs<br />
recharging<br />
Battery voltage too low<br />
to operate scooter<br />
Battery voltage too high<br />
Short in motor<br />
Brake malfunction<br />
Transmission lever<br />
not in neutral<br />
Transmission lever<br />
malfunction<br />
Motor problems<br />
Other internal errors<br />
Solution<br />
Recharge the batteries soon.<br />
Must recharge before using. Check<br />
battery condition and connections.<br />
Check battery condition and connections.<br />
Contact your authorized dealer to check<br />
your battery charger.<br />
Contact your authorized dealer.<br />
Contact your authorized dealer.<br />
Contact your authorized dealer.<br />
Contact your authorized dealer.<br />
Contact your authorized dealer.<br />
Contact your authorized dealer.<br />
Other Problems<br />
Low tire pressure: pump up tires to 30-40 lbs.<br />
During charging, the light on the charger does not change to green: Contact your authorized<br />
dealer.<br />
Scooter will not move when key is turned on:<br />
1.Check Power Reserve Indicator on the control panel. It should be lit in the green, yellow,<br />
and red zones.<br />
2.Check Self-Diagnostic Warning Light. It should be steady. If it is flashing, see chart on<br />
page 17 for problem identification.<br />
3.Check all electrical connections to be sure they are tight.<br />
4.If none of these correct the problem, contact your authorized dealer.<br />
14