here - Snap-on Equipment
here - Snap-on Equipment here - Snap-on Equipment
Maintenance Master Filter The master filter must be changed after six oil separator service procedures or sooner if the moisture indicator approaches the 50 ppm—pink—indication for R-134a. Refer to the Moisture Indicator Chart below. Complete the Oil Separator Bowl Maintenance Schedule on the following page to track when to change the master filter. Moisture Indicator Moisture Indicator Chart Indicator Color Model Temperature 75°F/24°C 100°F/38°C 125°F/52°C Purple Very Dry R-134a 20 ppm 35 ppm 60 ppm Violet Dry/Caution R-134a 35 ppm 55 ppm 85 ppm Pink Caution/Wet R-134a 90 ppm 120 ppm 150 ppm Orange Very Wet R-134a 130 ppm 160 ppm 190 ppm 3-4
Oil Separator Bowl Maintenance Schedule Maintenance Service # By Whom Date 1st 2nd 3rd 4th 5th 6th CHANGE FILTER NOW Service # By Whom Date 1st 2nd 3rd 4th 5th 6th CHANGE FILTER NOW Service # By Whom Date 1st 2nd 3rd 4th 5th 6th CHANGE FILTER NOW Service # By Whom Date 1st 2nd 3rd 4th 5th 6th CHANGE FILTER NOW Service # By Whom Date 1st 2nd 3rd 4th 5th 6th CHANGE FILTER NOW 3-5
- Page 1: USER’S MANUAL Kool Kare
- Page 4 and 5: Part Number ZEEAC304D Revision A ©
- Page 6 and 7: Safety Information The signal word
- Page 8 and 9: Safety Information Oil (Lubricant)
- Page 10 and 11: Safety Information Risk of injury.
- Page 12 and 13: ii Table of Contents
- Page 14 and 15: Trademark and Copyright Information
- Page 16 and 17: Using This Manual Safety Messages S
- Page 18 and 19: viii Using This Manual
- Page 20 and 21: Introduction Refrigerant Gases Halo
- Page 22 and 23: Introduction Refrigerant Substitute
- Page 24 and 25: Introduction Functional Description
- Page 26 and 27: Introduction Back View Figure 1-2:
- Page 28 and 29: Introduction Particle Filter Assemb
- Page 30 and 31: Introduction Language Selection Wit
- Page 32 and 33: 1-14 Introduction
- Page 34 and 35: Installation and Operation 3. Conne
- Page 36 and 37: Installation and Operation Adding R
- Page 38 and 39: Installation and Operation Operatio
- Page 40 and 41: Installation and Operation Connecti
- Page 42 and 43: Installation and Operation — If t
- Page 44 and 45: Installation and Operation Charge O
- Page 46 and 47: Installation and Operation Removing
- Page 48 and 49: Maintenance Maintaining the Oil Sep
- Page 52 and 53: Maintenance Changing the Master Fil
- Page 54 and 55: Maintenance • Wear safety goggles
- Page 56 and 57: Maintenance Figure 3-4: Particle Fi
- Page 58 and 59: Maintenance Symptom Possible Cause
- Page 60: 3-14 Maintenance
Maintenance<br />
Master Filter<br />
The master filter must be changed after six oil separator service<br />
procedures or so<strong>on</strong>er if the moisture indicator approaches the<br />
50 ppm—pink—indicati<strong>on</strong> for R-134a. Refer to the Moisture<br />
Indicator Chart below. Complete the Oil Separator Bowl<br />
Maintenance Schedule <strong>on</strong> the following page to track when to<br />
change the master filter.<br />
Moisture Indicator<br />
Moisture Indicator Chart<br />
Indicator Color Model Temperature<br />
75°F/24°C 100°F/38°C 125°F/52°C<br />
Purple<br />
Very Dry R-134a 20 ppm 35 ppm 60 ppm<br />
Violet<br />
Dry/Cauti<strong>on</strong> R-134a 35 ppm 55 ppm 85 ppm<br />
Pink<br />
Cauti<strong>on</strong>/Wet R-134a 90 ppm 120 ppm 150 ppm<br />
Orange<br />
Very Wet R-134a 130 ppm 160 ppm 190 ppm<br />
3-4
Change language