here - Snap-on Equipment

Introduction
D — Control Buttons
Five buttons are used to enter information and control your
Kool Kare units operation:
• RESTART cancels any information entered and begins the
program selection sequence as if the tester were just
powered up.
• AMOUNT displays refrigerant quantity in recovery tank and
amount chargeable.
• Three buttons with variable functions depending on the
screen display.
E — Main Power Switch
Turns power on and off. Must be on (I) for unit operation.
F — Oil Charge Hand Valve
For controlling the amount of new oil put into vehicle A/C
system.
G — Oil Charge Bottle
Container for holding new oil.
H — Moisture Indicator
Shows the amount of moisture in the recycled refrigerant.
I — Oil Separator Light/Switch
Used to manually enter the maintenance mode for oil separator
bowl maintenance. For additional information refer to Chapter
3–Maintaining the Oil Separator Bowl.
J — Oil Separator
Removes oil and other contaminant’s from the refrigerant being
recycled.
K — Beeper
Beeps to indicate successful completion of programmed
sequence and other conditions.
L — Tray
Use for tool and adapter storage.
1-7