ToneLab LE's manual - Vox

NOTE: If you haven’t connected an external effect processor to the INSERT RETURN jacks, the
INPUT signal will bypass the insert circuit whether the INSERT button LED is lit or dark.
ACTIVATING OR DEACTIVATING THE KEY LOCK FUNCTION
Here’s how you can use the Key Lock function to disable ToneLab LE’s buttons, selectors, and
knobs so they can’t be accidentally changed during a live performance.
NOTE: While the Key Lock function is activated, you won’t be able to operate any controls except for
the switches, pedals and the EXIT/TUNE button.
NOTE: The Key Lock setting is cancelled when you turn off the power; it will be disabled when you turn
on the power once again.
ACTIVATING THE KEY LOCK FUNCTION
1. If the name display shows anything other than a program name, or if the characters of the
program name are blinking, press the EXIT/TUNE button.
2. With the program name shown in the name display, press and hold the EXIT/TUNE button
for at least one second.
The name display will indicate KEY LOCK for one second, and then the value knob LEDs
will go dark.
Introduction
Panel Tour
Setup
Playing
Creating
and Storing
DEACTIVATING THE KEY LOCK FUNCTION
1. If the name display shows anything other than a program name, press the EXIT/TUNE button.
2. Press and hold the EXIT/TUNE button for at least one second.
The name display will indicate LOCK OFF for one second, and then the value knob LEDs
will light.
23