ToneLab LE's manual - Vox

Playing ToneLab LE
PROGRAM SELECT MODE
ToneLab LE has 120 programs (30 banks x 4 programs), and every one of these programs can
be totally rewritten or “custom tweaked” to your heart’s content. With the factory settings, banks
1–10 contain a total of 40 preset programs. (Banks 11–20 and 21–30 contain the same preset
programs as banks 1–10.)
In order to select programs, you need to be in Program Select mode.
SELECTING A PROGRAM
As an example, here’s how to select program 2-3 (bank 2, program 3).
1. Make sure that ToneLab LE is in Program Select mode.
If the BANK UP switch LED is lit green, you’re in Effect On/Off mode. Press the BANK UP
switch to change to Program Select mode. In Program Select mode, the BANK UP and
DOWN switch LEDs will be dark.
2. Use the BANK UP/DOWN switches (5.1) to select bank 2.
The bank number in the bank display blinks.
3. Press the program select 3 switch (5.2).
Program 2-3 will be recalled instantly. The program select 3 switch LED will light, and the
bank number will light steadily.
HINT: When you’ve selected the Bank but not the Program, the previously-selected program is still
active. So if you’re playing live and your next program change requires you to switch to a different
bank, you can select that bank ahead of time, ensuring a timely, seamless change.
EFFECT ON/OFF MODE
You can use program select switches 1–4 to switch the pedal effect, modulation effect, delay
effect, and reverb effect of the current program on/off individually. Also, you can use the BANK
DOWN switch to switch the signal that is being sent through the external effect processor connected
to the INSERT jacks.
HINT: You can turn the current amp model on or off using the CONTROL switch. (p.49)
HINT: When you want to switch programs, press the BANK UP switch again to return to Program
Select mode.
SWITCHING EFFECTS ON/OFF
As an example, here’s how you can switch the pedal and insert effects on/off for the current program.
1. If the BANK UP and DOWN switch LEDs are dark, the unit is in Program Select mode.
Press the BANK UP switch to enter Effect On/Off mode. The BANK UP switch LED lights up
green.
Program LEDs 1–4 and the BANK DOWN switch LED indicate the on/off status of the pedal
effect, as well as modulation, delay, reverb and insert effects.
2. If program LED 1 is lit, the pedal effect is ON. If you press program select switch 1, the pedal
effect will turn off and LED 1 will go dark.
3. If the BANK DOWN switch LED is dark, your guitar signal is not being sent through the
external effect. When you press the BANK DOWN switch, the external effect send/return will
be turned ON, and the BANK DOWN switch LED will light.
22