b e l l a v i t a t i l e - Longust

Recommendations

Info

Penny Rounds Almond Glossy CHPR-AG Putty Glossy CHPR-PG also in Matt finish CHPR-AM Biscotti Glossy CHPR-BG Red Glossy CHPR-RG Stacked Strips Almond Glossy CHST-SAG Putty Glossy CHST-SPG also in Matt finish CHST-SAM Red Glossy CHST-SRG Biscotti Glossy CHST-SBG Offset Strips Expresso Glossy CHST-OEG Fog Glossy CHST-OFG c h i c a g o Chocolate Glossy CHPR-CG White Glossy CHPR-WG also in Matt finish CHPR-WM Chocolate Glossy CHST-SCG White Glossy CHST-SWG also in Matt finish CHST-SWM Jet BlackGlossy CHST-OJG Offset Strips Expresso Glossy CHPR-EG Chicklets Expresso Glossy CHST-SEG Putty Glossy CHST-OPG Almond Glossy CHST-OAG also in Matt finish CHST-OAM Fog Glossy CHPR-FG Black CHCH-BG White CHCH-WG Fog Glossy CHST-SFG Red Glossy CHST-ORG Biscotti Glossy CHST-OBG Jet Black Glossy CHPR-JG Black & White CHCH-BWG Jet BlackGlossy CHST-SJG White Glossy CHST-OWG also in Matt finish CHST-OWM Chocolate Glossy CHST-OCG
Format (all sizes are nominal) Chicklets ⅝” x ⅝” (mounted on 12”x12” sheet) Thickness - 7mm 18 rows Penny rounds ½” x ½” (mounted on 12”x12” sheet) Thickness - 7mm 22 rows Installation & Maintenance • Inspect all product prior to installation for any visible defects or unacceptable color/ shade variation. Claims are not accepted after installation. • Install using a white thin-set modified with latex or polymer. Do NOT install using mastic and/or epoxy. • A ¼” square-notched trowel is suggested for applying the thin-set. • Allow for a 2mm grout joint between tiles. • To cut, use either a glass cutter with a new cutting wheel or a wet saw with a blade designed specifically to cut glass. • After cutting, smooth any rough edges with a diamond hand pad or similar. • Before grouting, allow the mortar base to dry for 36-48 hours. • Grout only with non-sanded grout. Using a sanded grout may scratch some surfaces. • To clean, use a damp sponge with war water. For heavy cleaning, use a nonabrasive cleaner with a damp sponge. Stacked strips ½” x 6” (mounted on 12”x12” sheet) Thickness - 6mm 18 rows Suggested Uses • Suitable for all wall applications • Suitable for interior and exterior applications • Suitable for wet or dry applications Application Residential Commercial Industrial Floor Wall/backsplash Counter Pool (vertical application only) ASTM Test Results Technical ASTM Test ASTM Test Characteristics Results Methods Water Absorption 0% C373 Frost Resistance Frost Proof C1026 Chemical Resistance Highly Resistant Offset strips ½” x 6” (mounted on 12”x12” sheet) Thickness - 6mm 18 rows C650 c h i c a g o Packaging Scratch Reisitance 5.5 MOHS Scale Size pcs/ carton cartons/ pallet Sq Ft/ carton Sq Ft/ pallet Weight/ ctn Weight/ pallet chicklets 15 72 15.02 1081.43 24.2 lbs 1797 lbs penny rounds 16 72 15.5 1116.01 29.7 lbs 2193 lbs stacked strips 11 72 11.01 793.04 28.6 lbs 2114 lbs offset strips 11 64 11.01 704.64 28.6 lbs 1885 lbs For more information visit www.bellavitatile.com
Page 1 and 2: e l l a v i t a t Welcome to Bellav
Page 3 and 4: Format (all sizes are nominal) Inst
Page 5 and 6: Format (all sizes are nominal) 1”
Page 13 and 14: Format (all sizes are nominal) 1x1
Page 21: Format (all sizes are nominal) Inst
Page 25: Format (all sizes are nominal) Subw

b e l l a v i t a t i l e - Longust

Create successful ePaper yourself

Delete template?

Save as template?