Sales Sheet - Products - Daltile

COLORBODY PORCELAIN
LODGE

LODGE
COLORBODY PORCELAIN
floor • wall • countertop
Lodge ColorBody Porcelain is the perfect fusion of rustic
meets contemporary. With a refined stone visual and smooth
Tru-Edge cut, Lodge offers a compelling visual at an affordable
price. Available in five warm colors and coordinating modern
liner accents, Lodge is sure to complement any project. The
option of four field sizes available in three surface textures
offers a wide range of application uses, including residential and
commercial exteriors.
Photo features Sabi Sabi Light Polished in 24 x 24 field tile on the floor in a grid pattern.

floor • wall • countertop
Field Tile
UNPOLISHED
OCEAN P301
LODGE CLOSE-UP
GLAZED PORCELAIN
OF TILE
ALPIN P300
PAPOOSE P302
PICO BONITO P303
SABI SABI P304
LIGHT POLISHED
ALPIN P300
PICO BONITO P303
CLOSE-UP
OF TILE
OCEAN P301
PAPOOSE P302
SABI SABI P304
TEXTURED
ALPIN P300
PICO BONITO P303
CLOSE-UP
OF TILE
OCEAN P301
PAPOOSE P302
SABI SABI P304

Decorative Accents
ALPIN P300
12 x12 Modern Liner
PICO BONITO P303
12 x12 Modern Liner
OCEAN P301
12 x12 Modern Liner
PAPOOSE P302
12 x12 Modern Liner
SABI SABI P304
12 x12 Modern Liner
CREATIVE IDEAS
Pattern Ideas
DIAMOND CORRIDOR
BLOCK TRELLIS
CHECKERBOARD

SIZES
TRIM
SQ. FT.
CARTON
PIECES PER
CARTON
TYPE NUMBER SIZE
PCS. PER
CARTON
16 x 32 Field Tile
(15-3/4” x 31-1/2”)
(40.0 cm x 80.0 cm)
13.77 4
Bullnose S-43C9 3 x 12 33
24 x 24 Field Tile
(23-9/16” x 23-9/16”)
(60.0 cm x 60.0 cm)
11.62 3
Cove Base S-36C9T 6 x 12 20
12 x 24 Field Tile
(11-3/4” x 23-9/16”)
(30.0 cm x 60.0 cm)
11.62 6
Cove Base Outcorner SC-36C9T 1 x 6 10
12 x 12 Field Tile
12 x 12 Modern Liner
Decorative Accent
RESIDENTIAL USAGE
NOTES
(11-3/4” x 11-3/4”)
(30.0 cm x 30.0 cm)
(11-3/4” x 11-3/4”)
(30.0 cm x 30.0 cm)
FLOORS WALLS COUNTERTOPS
10.65 11
EXTERIOR
PATIOS
- - 11
EXTERIOR
POOL DECKS
F W C EP * ED **
* Unpolished and textured surfaces only.
** Unpolished and textured surfaces only.
COMMERCIAL USAGE
APPLICATION INTERIOR EXTERIOR
RESIDENTIAL
LIGHT
COMMERCIAL COMMERCIAL RESIDENTIAL COMMERCIAL
Floors/Patios * **
Walls/Backsplashes
Countertops
Pool Decking ** ** ** ** **
Pool Lining
*Unpolished and Textured surfaces only.
**Textured surface only.
Textured surface: Suitable for exterior floors (including pool decks) and walls in freezing
and non-freezing climates when proper installation methods are followed.
Unpolished & Light Polished surfaces: Suitable for exterior walls in freezing and
non-freezing climates when proper installation methods are followed.
For proper bonding, medium bed mortar should be utilized in installing tiles with a
dimensional length size greater than 20” x 20”, large rectangles or tiles with greater
dimensional thickness than normal. Back buttering tiles of this nature in the installation
process will also assure proper coverage for bonding.
Special care needs to be given when installing tiles 20” and larger. Please refer to
www.daltileproducts.com/LargeTiles for information.
Special care should be taken when grouting with dark pigmented colors. A grout release
is recommended to prevent finely powdered pigments from lodging in the pores of the
tile surface. Use of a latex modified thin-set is recommended for installation.
Since there are variations in all fired ceramic products, the tile and trim supplied for your
particular installation may not match these samples. Final color selection should be made
from actual tiles and trim and not from tile and trim samples or color reproductions.
Manufactured in accordance with ANSI A137.1 standards.
For additional information refer to “Factors to Consider” at www.daltile.com/CommercialFactors.
Water, oil, grease etc. create slippery conditions. Floor applications with exposure to
these conditions require extra caution in product selection.
SHADE VARIATION
INSTALLATION
THICKNESS
MEDIUM (V2)
Color variation within each tile.
GROUT JOINT RECOMMENDATION
3/8” 1/8”
SLIP RESISTANCE (WET) : 2 & 3
The higher the rating, the higher the slip resistance.
1 < .50
2 .50 - .59 (Light Polished)
3 ≥ .60 (Unpolished & Textured)
TEST RESULTS
(Unpolished and Textured only)
ASTM# UNPOLISHED LT. POLISHED TEXTURED
Water Absorption C373 < 0.5% < 0.5% < 0.5%
Breaking Strength C648 > 450 lbs. > 450 lbs. > 450 lbs.
Scratch Hardness MOHS 8.0 8.0 8.0
Chemical Resistance C650 Resistant Resistant Resistant
Coefficient of Friction
C1028
Wet: ≥ 0.60
Dry: ≥ 0.70
Wet: ≥ 0.50
Dry: ≥ 0.70
Wet: ≥ 0.65
Dry: ≥ 0.80

LODGE
GLAZED PORCELAIN
floor • wall • countertop
By their very design, Daltile products can help make it easier for you to earn LEED points
and/or points towards many industry leading green home building programs. From using
recycled material content to establishing manufacturing facilities within 500 miles of your
project, we help ensure you don’t have to compromise your design to be environmentally
conscious. For detailed information, visit daltilegreenworks.com.
7834 C. F. Hawn Freeway | Dallas, TX 75217 | 214.398.1411 800.933.TILE
For more information about Daltile products and services, visit our website at daltile.com
©2012 Dal-Tile Corporation (6/12) SSDTSSLODGE