NavAid Controller - Hydrosphere UK Ltd.
NavAid Controller - Hydrosphere UK Ltd.
NavAid Controller - Hydrosphere UK Ltd.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Data Sheet<br />
<strong>NavAid</strong> <strong>Controller</strong><br />
Control System<br />
• Control and monitoring for all components of the navigation light system used for marking offshore<br />
wind farms as obstacles to shipping:<br />
5 nautical mile lanterns, close-range marking, additional structure marking<br />
• Monitoring of the power supply and battery status of the <strong>NavAid</strong> UPS 24 V DC integrated into the<br />
system<br />
• Communication via IEC 61850 or MODBUS TCP protocol for monitoring and remote control of navigation<br />
light components<br />
• Embedded web server for settings, software update and diagnostics of the navigation light system<br />
The Sabik <strong>NavAid</strong> <strong>Controller</strong> is part of the control and monitoring system for the marking of offshore wind<br />
farms. The steel plate housing of the controller is designed for indoor wall mounting. The remote access unit of<br />
type Sabik LightGuard Gateway is integrated into the housing. Depending on type and intended use, additionally<br />
components of the LightGuard Bus systems, LightGuard Bus IM-01 and LightGuard Bus LCM-01 are integrated<br />
into the housing.<br />
Mode of operation<br />
The <strong>NavAid</strong> controller system is used for controlling and monitoring of illuminating and marking components on<br />
offshore structures.<br />
Special features<br />
• Activation and generation of the flash code for all of the attached 5 nautical miles lanterns<br />
• Activation and generation of an intensity control signal for spotlights<br />
• Current consumption monitoring for all components of the navigation light system, as well as error<br />
detection and reporting<br />
The <strong>NavAid</strong> <strong>Controller</strong> is provided with two network connectors: LAN#1 und LAN#2.<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 15/01/2013<br />
Page 1
Via LAN#1 the <strong>NavAid</strong> system is connected to the SCADA system, so that all important information can be<br />
retrieved via IEC 61850 or MODBUS TCP.<br />
LAN#2 is the service connector for update and diagnostics, so that service effort in terms of on-site operation<br />
can be kept as low as possible.<br />
The LightGuard Gateway communicates via TCP/IP with the control centre, receives control commands from<br />
the same and provides status information of the individual components.<br />
As required and depending on the <strong>NavAid</strong> controller type, one or two Light Control Modules are used for current<br />
consumption monitoring of the 5 nautical mile lanterns and spotlights and for spotlight brightness control.<br />
Components inside the cabinet<br />
1 LightGuard Gateway<br />
2 Network connectors<br />
LightGuard Gateway<br />
3 User interface with status indicators<br />
4 Surge protection<br />
5 LightGuard Bus modules<br />
(IM-01, LCM-01, depending on type,<br />
see table below)<br />
6 Terminal block<br />
7 Shield connection<br />
8 Cable glands<br />
9 Circuit breaker<br />
Type<br />
Components inside the cabinet<br />
LightGuard Gateway LightGuard Bus IM-01 LightGuard BUS LCM-01<br />
<strong>NavAid</strong> <strong>Controller</strong> Basic 1 0 0<br />
<strong>NavAid</strong> <strong>Controller</strong> Extended 1 1 1 1<br />
<strong>NavAid</strong> <strong>Controller</strong> Extended 2 1 1 2<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 15/01/2013<br />
Page 2
Technical Data<br />
Dimensions and weight<br />
Housing dimensions (width × height × depth)<br />
Weight (<strong>NavAid</strong> <strong>Controller</strong> II with all components inside)<br />
600 mm × 600 mm × 220 mm<br />
33 kg<br />
Environmental conditions<br />
Ambient temperature TA (operation) -25 °C to 50 °C<br />
Ambient temperature (storage / transport) -40 °C to 85 °C<br />
Humidity (operation / storage / transport) max. 95 %<br />
Atmospheric pressure (operation)<br />
80 kPa to 108 kPa<br />
Degree of protection according to IEC 60529 IP54<br />
Protection class<br />
Class III<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 15/01/2013<br />
Page 3
EMC compliance<br />
Static discharge (ESD) IEC 61000-4-2:2008<br />
IEC 61000-6-2:2005<br />
Electromagnetic fields IEC 61000-4-3<br />
IEC 61000-6-2:2005<br />
Fast transients (burst) IEC 61000-4-4<br />
IEC 61000-6-2:2005<br />
High energy transients (Surge) IEC 61000-4-5<br />
IEC 61000-6-2:2005<br />
Conducted interference IEC 61000-4-6<br />
IEC 61000-6-2:2005<br />
Low frequency magnetic fields IEC 61000-4-8<br />
IEC 61000-6-2:2005<br />
Radiated interference emission CISPR 16-2<br />
IEC 61000-6-4:2006<br />
Criterion B<br />
4 kV air discharge<br />
4 kV contact discharge on mounting<br />
plate<br />
Criterion A<br />
Field strength 10 V/m<br />
Criterion B<br />
All connections:<br />
Test voltage 1 kV<br />
Criterion B<br />
All connections:<br />
Test voltage 0.5 kV<br />
Criterion A<br />
All connections:<br />
Test voltage 10 V<br />
Criterion A<br />
30 A/m, 50 Hz<br />
Measuring distance 10 m<br />
Ordering data<br />
Type<br />
Item no.<br />
<strong>NavAid</strong> <strong>Controller</strong> Basic 10002386<br />
<strong>NavAid</strong> <strong>Controller</strong> Extended 1 10002385<br />
<strong>NavAid</strong> <strong>Controller</strong> Extended 2 10002383<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 15/01/2013<br />
Page 4
Change language