NavAid Controller AIS - Hydrosphere UK Ltd.
NavAid Controller AIS - Hydrosphere UK Ltd.
NavAid Controller AIS - Hydrosphere UK Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Data Sheet<br />
<strong>NavAid</strong> <strong>Controller</strong> <strong>AIS</strong><br />
Redundant <strong>AIS</strong> System<br />
• Redundant Automatic Identification System (<strong>AIS</strong>) Type 3 (transmit/ receive)<br />
• Position reporting of beacons and obstacles to navigation (message 21)<br />
• Compliant with IEC62320-2, ITU.RM.1371-3, IALA A-126<br />
• <strong>AIS</strong> Transponder approved by the Federal Maritime and Hydrographic Agency<br />
(BSH/46162/4322015/11)<br />
The Sabik <strong>NavAid</strong> <strong>Controller</strong> <strong>AIS</strong> (Automatic Identification System) is used to ensure the safety of navigation. It<br />
serves for identification of navigational aids. To this purpose a redundant <strong>AIS</strong> system is used. The two devices<br />
of type <strong>AIS</strong> SIB T3 support two channels (A, B, A+B in parallel mode or A+B alternating) and up to 10 virtual<br />
stations. Slot synchronization is realized via the integrated GPS receiver.<br />
The devices can be configured (reporting interval, mode of operation, …) via a terminal menu (PC), via an IEC<br />
61162 compliant interface or via VDL (VHF Data Link).<br />
Mode of operation<br />
The <strong>AIS</strong> transponders periodically broadcast various messages comprising important information. Message 21<br />
is primarily addressed to ships which are ready to receive and provides information concerning type,<br />
geographical position and status of the aid to navigation. Pursuant to IALA Recommendation A-126, virtual<br />
AtoNs are also supported.<br />
If necessary, <strong>AIS</strong> data may be transferred via Ethernet from the installation site to the Vessel Traffic Service<br />
(VTS).<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> <strong>AIS</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 23/01/2013<br />
Seite 1
Components inside the cabinet<br />
1 LightGuard Gateway<br />
2 Network connectors<br />
LightGuard Gateway<br />
3 Redundant system <strong>AIS</strong>-SIB T3<br />
4 VHF antennas<br />
5 Potential equalization<br />
6 GPS antennas<br />
7 Terminal block X01:<br />
Power supply<br />
8 Terminal block X3:<br />
Status <strong>AIS</strong> system<br />
9 Terminal block X4:<br />
UPS control<br />
10 Network connection LAN#2 (Service)<br />
11 Network connection LAN#1 (SCADA)<br />
Error detection<br />
Error detection is made possible by redundancy: Both of the <strong>AIS</strong> transponders in the control cabinet are<br />
configured for a 6-minute reporting interval, with a time offset of 3 minutes between the intervals of the two<br />
devices. For standard operation this staggering will result in an actual message interval of 3 minutes. If one of<br />
the transponders fails, the reporting interval increases to 6 minutes, and this doubling of the reporting interval<br />
enables the base station to detect the malfunction.<br />
The LightGuard Gateway communicates via TCP/IP with the control system, receives control commands and<br />
provides status information for the individual components.<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> <strong>AIS</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 23/01/2013<br />
Seite 2
Technical Data<br />
Dimensions and weight<br />
Housing dimensions (width × height × depth)<br />
Weight<br />
535 mm × 747 mm × 305 mm<br />
40 kg<br />
Environmental conditions<br />
Regulations IEC 60945<br />
Ambient temperature TA (operation) -25 °C to 55 °C<br />
Ambient temperature (storage / transport) -40 °C to 85 °C<br />
Humidity (operation / storage / transport) max. 95 % according to IEC 60945<br />
Atmospheric pressure (operation)<br />
80 kPa to 108 kPa<br />
Degree of protection according to IEC 60529 IP66<br />
Protection class<br />
Class III<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> <strong>AIS</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 23/01/2013<br />
Seite 3
EMC compliance<br />
Static discharge (ESD) EN 60945:2002<br />
IEC 61000-4-2:2008<br />
Electromagnetic fields EN 60945:2002<br />
IEC 61000-4-3:2007<br />
Fast transients (burst) EN 60945:2002<br />
IEC 61000-4-4:2010<br />
Conducted interference EN 60945:2002<br />
IEC 61000-4-6:2008<br />
Voltage dips, interruptions EN 60945:2002<br />
IEC 61000-4-11:2004<br />
Conducted interference emission EN 60945:2002<br />
IEC/CISPR 16-2-1:2008<br />
Radiated interference emission EN 60945:2002<br />
IEC/CISPR 16-2-3:2006<br />
Criterion B<br />
4 kV air discharge<br />
4 kV contact discharge<br />
Criterion A<br />
Field strength: 10 V/m<br />
Criterion B<br />
All connections:<br />
Test voltage 1 kV<br />
Criterion A<br />
All connections:<br />
Test voltage 10 V<br />
Criterion C<br />
DC supply lines and signal lines<br />
(150 terminal shielding)<br />
Measuring distance 3 m<br />
Ordering data<br />
Type<br />
Item no.<br />
<strong>NavAid</strong> <strong>Controller</strong> <strong>AIS</strong> 10002238<br />
SABIK GmbH · Wilhelm-Maybach-Straße 3 · 19061 Schwerin · Germany<br />
Data Sheet <strong>NavAid</strong> <strong>Controller</strong> <strong>AIS</strong> Version 1.01<br />
Fon +49 385 676700-0 · Fax +49 385 676700-99 · info@sabik.de 23/01/2013<br />
Seite 4