Aastra 5370/Aastra 5370ip - This page is no longer valid

Personalizing your phone
Answer
Setting the answering mode:
Scroll to Answer and press the Modify Foxkey.
Select the required setting and confirm with the Ok Foxkey.
➔The setting is stored.
Setting possibilities for answering:
Key to answer the call by pressing the Team key, Handset to answer by picking
up the handset, and Hands-free to answer automatically with hands-free.
Notes:
• The Handset and Hands-free settings only work when the ringing signal is
activated.
• If you select answer using Handset or Hands-free, you must also specify the
Priority, with 1 being the highest priority, and 8 the lowest:
Clearing a key
You want to clear the assignment made to a configurable key.
Select the function No function to delete the function key assignment.
No function
No function
To clear the Foxkey:
Press the Foxkey with a long keystroke.
➔The display shows the key type.
Scroll to No function and confirm with the Ok Foxkey.
➔The key configuration is cleared.
To clear a configurable key:
Press the configurable key and hold it down for a moment.
➔The display shows the key type.
Scroll to No function and confirm with the Ok Foxkey.
➔The key configuration is cleared.
Function selection for configurable key
This section contains a list of all the functions you can store under a configurable key
via the menu. Contact your system administrator for more information.
More information on how to store functions under a configurable key using function
commands and function code can be found in chapter "Formulating functions",
page 112.
Function
No function
Call Forwarding
Description
Select this function to delete the function key assignment.
With this function you forward incoming calls directly to a different destination.
For further information refer to chapter "Forwarding calls (Call forwarding)",
page 55.
Aastra 5370/Aastra 5370ip 107
eud-1281/1.3 – R3.0 – 04.2013