ACCESSORIES - Disab.com
ACCESSORIES - Disab.com
ACCESSORIES - Disab.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ACCESSORIES</strong><br />
YOUR PERFORMANCE IN OUR MIND<br />
Issue 1 Jan 2012
Market organisation<br />
DISAB Vacuum Technology AB,<br />
Eslöv<br />
DISAB-TELLA AB,<br />
Vallentuna<br />
Logiwaste AB<br />
DISAB GmbH,<br />
Ennepetal<br />
Rent-A-Vac GmbH<br />
Gotland Ltd<br />
Reigate<br />
Agents or representatives<br />
The DISAB Group is also represented in<br />
the US, the Middle-East, in northern Africa,<br />
southern America and Asia<br />
Agents & Representatives<br />
Country Company Contact Tel e-mail<br />
Bulgaria Kammarton Martin Staykov +359 2 926 60 60 martin@kammarton.<strong>com</strong><br />
UK DISAB-TELLA UK Ltd Gerry Campbell +44 1235 84 85 44 disabUK@aol.<strong>com</strong><br />
UK DISAB Service Centre Andrew Ainsworth +44 79 18 56 88 01 andrew@gotland.co.uk<br />
Finland MAP OY Mikko Perokorpi +358 (19) 400 460 430 mikko.perokorpi@mapretket.<strong>com</strong><br />
Greece Bearing Distr. Center Costas Nikas +30 6974 75 54 68 knikas@otenet.gr<br />
Middle East Haugen System Karl T Haugen +46 40 30 64 00 info@haugensystem.<strong>com</strong><br />
Norway Skantek Sven Åge Bergum +47 6691 03 00 sven.aa@skantek.no<br />
Poland Semi-Tech Janusz Polec +48 58 665 53 50 semitech@onet.pl<br />
Portugal Certoma S. Pereira +351 963 021 891 certoma@certoma.pt<br />
Russia EROST. Eduard Sitnikov +7 812 346 7349 ved@disab.ru<br />
Serbia Indmec Ltd Deen Williams +386 8 385 62 02 info@indmec.co.uk<br />
Spain IBERMOP Santos Alvaro +34 91 669 71 10 ibermop@arrakis.es
Dear user<br />
DISAB aims to be the turn-key supplier of products within the field of vacuum technology.<br />
This accessory catalogue contains a varied selection of spare parts and DISAFLOW accessories that<br />
you will need in order to use your vacuum loader or central vacuum system in the best way.<br />
Our range of products are based on our long experience gained over the years.<br />
The range and quality is constantly being improved, which means high standards of quality and user<br />
friendliness for you.<br />
Don’t hesitate to contact us on the below numbers for further discussions regarding spare parts and service<br />
of new or old equipment.<br />
Customer Support Manager<br />
Joacim Holmberg<br />
+46 76 863 48 10<br />
mail: joacim.holmberg@disab.<strong>com</strong><br />
Spare parts<br />
Andrea Serler<br />
+46 413 55 43 03<br />
mail: andrea.serler@disab.<strong>com</strong><br />
Mats Klingborg<br />
+46 413 5543 41<br />
mail: mats.klingborg@disab.<strong>com</strong><br />
DISAB Service Centre UK<br />
Andrew Ainsworth GB<br />
+44 (0) 161 775 24 11<br />
mail: andrew@gotland.co.uk<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 3
The DISAFLOW system<br />
DISAFLOW is the optimum coupling system for building a fixed suck/blow tube system. It is easy to<br />
handle, durable and light and ensures a safe and environmentally-friendly material handling. The <strong>com</strong>ponents<br />
<strong>com</strong>e in galvanized steel or stainless steel and are available in dimensions from 3” to 8”.<br />
1. Steel cover 2. Reducer 3. Steel coupling 4. Steel coupling 5. Spanner 6. Hose coupling w. flange<br />
1. Steel cover DFB is used to seal the hose connection, tank inlet etc. at transport<br />
2. Reducer DFU is used to connect different pipe dimensions<br />
3. Steel couplings for welding DFV is used to connect steel pipes and other<br />
equipment eg. fixed pipe installations.<br />
4. Steel coupling DFM is mounted on the aluminium pipes in the suction system<br />
5. Spanner DFK is used to connect different parts of the DISAFLOW system.Is available<br />
in a reinforced design for extreme high load eg. to extend aluminium pipes on the<br />
hoseboom or at blowing material.<br />
6. Hose coupling with flange DFS. Mounted at the end of the hose with a steel or copper<br />
cord connected to the hose coupling to ensure an optimum conductivity. It is secured<br />
with a hose clamp KRK or a PA-RI hose clamp.<br />
Steelcover,spanner and hose coupling<br />
Coupling for water spray<br />
4<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
Suction accessories<br />
SHT-S - Suction handle for hose<br />
Art. Nr. Designation Size<br />
435-674 SHT-S 100 100 mm 4 ’’<br />
435-676 SHT-S 150 150 mm 6 ’’<br />
SHT - Suction handle<br />
Art. Nr. Designation Size<br />
435-572 SHT 76 76 mm 3’’<br />
435-574 SHT 100 100 mm 4’’<br />
435-575 SHT 125 125 mm 5”<br />
435-576 SHT 150 150 mm 6’’<br />
435-578 SHT 200 200 mm 8’’<br />
NEW!<br />
SAR - Suction pipe<br />
For installation in handle<br />
Art. Nr. Designation Size Length<br />
437-742 SAR 76 76 mm 3’’ 1 mtr<br />
437-744 SAR 100 100 mm 4’’ 0,8 mtr<br />
437-745 SAR 125 125 mm 5” 0,8 mtr<br />
437-746 SAR 150 150 mm 6’’ 0,8 mtr<br />
437-748 SAR 200 200 mm 8’’ 1 mtr<br />
SFS - Fluidizing suction nozzle<br />
Art. Nr. Designation Size<br />
435-591 SFS 100 100 mm 4’’<br />
435-590 SFS 150 150 mm 6”<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 5
DSB - Steel bend 90°<br />
Art. Nr. Designation Size<br />
435-631 DSB 200 200 mm 8 ’’<br />
435-632 DSB 150 150 mm 6 ’’<br />
DSB - Steel bend 45°<br />
Art. Nr. Designation Size<br />
435-635 DSB 200-45 200 mm 8 ’’<br />
435-636 DSB 150-45 150 mm 6 ’’<br />
DFU - Reducer<br />
Art. Nr. Designation Size<br />
435-704 DFU 100/76 100mm/76mm 4”/3”<br />
435-703 DFU 125/100 125mm/100mm 5”/4”<br />
435-702 DFU 150/100 150mm/100mm 6”/4”<br />
435-701 DFU 150/125 150mm/125mm 6”/5”<br />
435-700 DFU 200/150 200mm/150mm 8”/6”<br />
DFY - Branch pipe<br />
Art. Nr. Designation Size<br />
435-709 DFY 150-2x100 150mm-2x100mm 6”-2x4”<br />
435-708 DFY 150-2x150 150mm-2x150mm 6”-2x6”<br />
435-707 DFY 200-3x100 200mm-3x100mm 8”-3x4”<br />
435-706 DFY 200-2x150 200mm-2x150mm 8”-2x6”<br />
435-705 DFY 200-1x150-<br />
2x100<br />
200mm-1x150mm<br />
-2x100mm<br />
8”-1x6”-<br />
2x4”<br />
DFU-S - Reducer - Only for suction<br />
Art. Nr. Designation Size<br />
435-720 DFU-S 150/200 150mm/200mm 6”/8”<br />
435-722 DFU-S 100/150 125mm/100mm 4”/6”<br />
Wear ring<br />
Art. Nr. Designation Size<br />
435-841 Wear ring 200 mm 8”<br />
435-842 Wear ring 150 mm 6”<br />
6<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
DFS - Hose coupling with flange<br />
Art. Nr. Designation Size<br />
435-422 DFS 76 76 mm 3”<br />
435-423 DFS 80 80 mm 3’’<br />
435-424 DFS 100 100 mm 4’’<br />
435-425 DFS 125 125 mm 5”<br />
435-426 DFS 150 150 mm 6’’<br />
435-428 DFS 200 200 mm 8’’<br />
435-429 DFS 250 250 mm 10” *)<br />
NEW!<br />
DFS - Hose coupling with flange -<br />
Stainless steel *)<br />
Art. Nr. Designation Size<br />
435-424R DFS 100-R 100 mm 4”<br />
435-425R DFS 125-R 125 mm 5”<br />
435-426R DFS 150-R 150 mm 6”<br />
435-428R DFS 200-R 200 mm 8”<br />
DFK - Spanner<br />
Art. Nr. Designation Size<br />
435-524 DFK 100 100 mm 4’’<br />
435-526 DFK 150 150 mm 6”<br />
435-528 DFK 200 200 mm 8’’<br />
435-530 DFK 250 250 mm 10” *)<br />
435-616 DFK 150R 150 mm 6’’<br />
435-618 DFK 200R 200 mm 8’’<br />
435-619 DFK 250F 250 mm 10” *)<br />
446-504 Spring.zinc 4x75<br />
plated<br />
NEW!<br />
NEW!<br />
DFK - Spanner - Stainless steel *)<br />
Art. Nr. Designation Size<br />
435-524R DFK 100-R 100 mm 4’’<br />
435-526R DFK 150-R 150 mm 6”<br />
435-528R DFK 200-R 200 mm 8’’<br />
DFB - Steel cover<br />
Art. Nr. Designation Size<br />
435-514 DFB 100 100 mm 4’’<br />
435-516 DFB 150 150 mm 6”<br />
435-518 DFB 200 200 mm 8’’<br />
DFA - Adapter M42 - Disaflow<br />
Art. Nr. Designation Size<br />
435-128 DFK 100 100 mm 4’’<br />
435-124 DFK 150 150 mm 6’’<br />
*) to be ordered R= Reinforced<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 7
DFM - Steel coupling incl. o-ring<br />
For Aluminium pipe L=540 for extra strengh in special<br />
application<br />
Art. Nr. Designation Size Length<br />
435-434 DFM 100 100 mm 4’’<br />
435-436 DFM 150 150 mm 6’’<br />
435-438 DFM 200 200 mm 8’’<br />
437-762 DFM 150 150 mm 6” L=540<br />
Reinforced<br />
437-761 DFM 200<br />
Reinforced<br />
200 mm 8” L=540<br />
DFV - Steel coupling for welding incl. o-ring<br />
Art. Nr. Designation Size Length<br />
435-444 DFV 100 100 mm 4’’<br />
435-444R DFV 100 100 mm 4” stainless<br />
435-446 DFV 150 150 mm 6’’<br />
435-446R DFV 150 150 mm 6” stainless<br />
435-448 DFV 200 200 mm 8’’<br />
435-448R DFV 200 200 mm 8” stainless<br />
435-449 DFV 150L 150 mm 6’’ L=50<br />
435-450 DFV 200L 200 mm 8’’ L=50<br />
OAR - Aluminium pipe<br />
Art. Nr. Designation Size Length<br />
437-731 OAR 76 76 mm 3” 6 m<br />
437-733 OAR 100 100 mm 4” 6 m<br />
437-736 OAR 150 150 mm 6’’ 4 m<br />
437-738 OAR 200 200 mm 8’’ 4 m<br />
O-rings for Disaflow couplings<br />
Art. Nr. Designation Size<br />
430-444 O-ring 6 mm - 4”<br />
430-446 O-ring 6 mm - 6”<br />
430-448 O-ring 6 mm - 8”<br />
Various rubber sealing profiles<br />
Art. Nr. Designation Dimension / Type<br />
430-307 Rubber sealing 25 x 25 mm - Grey hard<br />
430-314 Rubber sealing 25 x 25 mm - Black soft<br />
430-325 Hatch sealing <strong>Disab</strong> sealing P-93<br />
8<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
KRK - Hose clamp<br />
Art. Nr. Designation Size<br />
435-809 KRK 82-88 76 mm 3’’<br />
435-807 KRK 106-116 100 mm 4’’<br />
435-805 KRK 131-140 125 mm 5’’<br />
435-803 KRK 160-170 150 mm 6’’<br />
435-801 KRK 226-218 200 mm 8’’<br />
435-821 KRK 231-218 8”+ *)<br />
*) re<strong>com</strong>mended for cyclone hose<br />
PARI - Hose clamp<br />
Art. Nr. Designation<br />
439-050 PA-RI 50<br />
439-055 PA-RI 55<br />
439-060 PA-RI 60<br />
439-065 PA-RI 65<br />
439-085 PA-RI 85<br />
439-115 PA-RI 115<br />
439-120 PA-RI 120<br />
439-140 PA-RI 140<br />
439-150 PA-RI 150<br />
439-160 PA-RI 160<br />
439-170 PA-RI 170<br />
439-180 PA-RI 180<br />
439-190 PA-RI 190<br />
439-210 PA-RI 210<br />
439-220 PA-RI 220<br />
439-230 PA-RI 230<br />
439-240 PA-RI 240<br />
439-250 PA-RI 250<br />
439-260 PA-RI 260<br />
439-270 PA-RI 270<br />
439-290 PA-RI 290<br />
439-320 PA-RI 320<br />
439-360 PA-RI 360<br />
439-400 PA-RI 400<br />
439-420 PA-RI 420<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 9
Band and tools<br />
Band<br />
Art. Nr. Designation Size<br />
439-600 Bandimex 19,1 mm x 30 m<br />
Buckles for Bandimex<br />
Art. Nr. Designation Size Qty<br />
439-601 Buckles 19,1 mm 100 pcs/<br />
package<br />
Tool for Bandimex<br />
Art. Nr. Designation<br />
439-602 Tool<br />
Option to hose arm<br />
Art. Nr. Designation<br />
231-101 hose arm, inlet box, bough protection<br />
10<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
DTL - Airbleeding valve<br />
Art. Nr. Designation Size<br />
435-550 DTL 150 150 mm 6’’<br />
DVR - Coupling for waterspray<br />
Art. Nr. Designation Size<br />
435-564 DVR 100 100 mm 4’’<br />
435-566 DVR 150 150 mm 6’’<br />
435-568 DVR 200 200 mm 8’’<br />
Damping box for blowing<br />
Art. Nr. Designation Size<br />
435-843 Damping box 150 mm 6’’<br />
435-848 Damping box 125 mm 5”<br />
SGA - Floor suction nozzle<br />
1200 mm for 6” / 800 mm for 4”<br />
Art. Nr. Designation Size<br />
435-600 Complete incl pipe and handle 1200 mm<br />
435-601 Complete incl pipe and handle 800 mm<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 11
Inner tube and outer tube for hose boom<br />
Centrally mounted hose boom<br />
Art. Nr. Designation Length<br />
231-011 Outer tube L=1729 mm<br />
138-1152v02 Inner tube L=1935 mm<br />
Side mounted hose boom - long<br />
Art. Nr. Designation Length<br />
138-1106 Outer tube L=2350 mm<br />
138-1152v01 Inner tube L=2560 mm<br />
Side mounted hose boom - short<br />
Art. Nr. Designation Length<br />
138-742 Outer tube L=1729 mm<br />
138-1152v02 Inner tube L=1935 mm<br />
Full Flex Centrally mounted hose boom<br />
Art. Nr. Designation Length<br />
231-085 Outer tube L=1929 mm<br />
231-087 Inner tube L=2124 mm<br />
Inlet<br />
Art. Nr. Designation<br />
435-637 DSB 200-60, inlet bend<br />
221-261 wear plate, above rear inlet, -1812<br />
12<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
Hoses<br />
DISAB is working in close cooperation with the hose manufacturers in order to safeguard optimum<br />
design and material quality of the hoses. We offer working hoses and hoses for transport<br />
ranging from 3” to 10”. No matter what material to be transported, we have the best solution in<br />
one with our DISAFLOW coupling system.<br />
The most <strong>com</strong>mon type of material hoses are<br />
Working hose: flexible, wear resistant, has an acceptable weight and is easy to handle<br />
Transport hose: wear resistant both inside and outside, manageable<br />
Inlet hoses: very wear resistant (rubber pipe)<br />
All hoses can be conductive by connecting the steel cord or copper wire.<br />
TRELLEBORG<br />
Working hose TAS MD<br />
Flexible hose for moderately difficult applications with lower weight and greater bend radio than<br />
HD.<br />
Temp range: -30° - +90° C<br />
Electrical properties: Non-conductive inner rubber. The steel coil can be exposed and connected<br />
to the couplings or wire conduction.<br />
Cover:<br />
Wear and weather resistant SBR, black corrugated<br />
Working hose TAS HD (heavy duty)<br />
Suitable for any job where wear resistance have the priority together with flexibility.<br />
Temp range: -30° - +90° C<br />
Electrical properties: Non-conductive<br />
Cover:<br />
Wear and weather resistant SBR, black corrugated<br />
Working hose TAS HD (heavy duty)<br />
Suitable for very wearing applications.<br />
Temp range: -30° - +90° C<br />
Electrical properties: Conductive<br />
Cover:<br />
Wear and weather resistant SBR, black corrugated<br />
Transport hose TTS HD (heavy duty)<br />
Suitable for transportation of very wearing material such as stone, sand, building waste etc.<br />
Temp range: -40° - +90° C<br />
Electrical properties: Conductive<br />
Cover:<br />
Wear and weather resistant SBR, black, flat<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 13
Working hose MD<br />
Art. Nr. Designation Size<br />
437-610 TAS 76, L=12 m 76 mm 3’’<br />
437-611 TAS 100, L= 12 m 100 mm 4’’<br />
437-612 TAS 125, L= 12 m 125 mm 5’’<br />
437-613 TAS 150, L= 12 m 150 mm 6’’<br />
437-614 TAS 200, L= 12 m 200 mm 8’’<br />
Working hose HD<br />
Art. Nr. Designation Size<br />
437-624 TAS 76, L= 20 m 76 mm 3’’<br />
437-625 TAS 100, L= 20 m 100 mm 4’’<br />
437-626 TAS 125, L= 20 m 125 mm 5’’<br />
437-622 TAS 150, L= 20 m 150 mm 6’’<br />
437-623 TAS 200, L= 12 m 200 mm 8’’<br />
Transport hose HD<br />
Art. Nr. Designation Size<br />
437-627 TTS 76, L=40 m 76 mm 3’’<br />
437-628 TTS 100, L=40 m 100 mm 4’’<br />
437-629 TTS 125, L=40 m 125 mm 5’’<br />
437-630 TTS 150, L=40 m 150 mm 6’’<br />
437-621 TTS 200, L=20 m 200 mm 8’’<br />
14<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
EKONIL<br />
Working hose EAS 1427<br />
Very flexible and light working hose for low and medium abrasive materials and medium<br />
vacuum resistance. Easy to work with and suitable in very narrow places and when transporting<br />
light or medium materials.<br />
Temp range: -40° to +80°C<br />
Electrical properties: Conductive. Supplied with spiral free, soft ends with an antistatic wire<br />
protruding and ready to be assembled.<br />
Cover:<br />
Wear and weather resistant yellow EPDM, corrugated<br />
Working hose EAS 1430<br />
A flexible working hose and with a medium weight. Easy to work with and suitable as the<br />
”every day working hose”. Suitable for transport of large volumes of medium and high abrasive<br />
materials.<br />
Temp range: -40° to +80°C<br />
Electrical properties: Conductive. Supplied with spiral free, soft ends with an antistatic<br />
wire protruding and ready to be assembled.<br />
Cover:<br />
Wear and weather resistant corrugated black cover NR-SBR<br />
rubber <strong>com</strong>pound.<br />
Transport hose ETS 1429 + ETS1414 (plane)<br />
A very flexible and easy to handle transport hose with high vacuum resistance and medium<br />
weight.<br />
Suitable for transport of large volumes of medium and high abrasive materials.<br />
Temp range: -40° - +80°C<br />
Electrical properties: Conductive. Supplied with spiral free, soft ends with an antistatic<br />
wire protruding and ready to be assembled.<br />
Cover:<br />
An abrasion resistant corrugated, black cover in weather resistant<br />
EPDM rubber <strong>com</strong>pound.<br />
Inlet hoses / cyclone hose<br />
An extremely wear resistant Rubber pipe designed for installation on DISAB mobile vacuumloaders<br />
as inlet hose and in the fantastic work saving DISAB hose boom.<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 15
Working hose / yellow / plane / EAS1427<br />
Art. Nr. Designation Size<br />
437-633 EAS 76, L=10 m 76 mm 3 ”<br />
437-634 EAS 102, L=10 m 100 mm 4 ’’<br />
437-635 EAS 127, L=10 m 125 mm 5 ’’<br />
437-636 EAS 152, L= 6 m 150 mm 6 ’’<br />
Working hose HD (heavy duty) /EAS1430<br />
Art. Nr. Designation Size<br />
437-527 EAS 76 L=10 m 76 mm 3”<br />
437-528 EAS 102 L=10 m 102 mm 4”<br />
437-529 EAS 127 L=10 m 127 mm 5”<br />
437-639 EAS 152 L= 6 m 152 mm 6”<br />
437-530 EAS 203 L= 6 m 203 mm 8”<br />
Transport hose /black/plane ETS1414<br />
Art. Nr. Designation Size<br />
437-531 ETS 76 L=40 m 76 mm 3”<br />
437-532 ETS 102 L=40 m 102 mm 4”<br />
437-533 ETS 127 L=20 m 127 mm 5”<br />
Transport hose /black ETS1429<br />
Art. Nr. Designation Size<br />
437-646 ETS 150 L=6 m 150 mm 6”<br />
437-534 ETS 203 L=6 m 203 mm 8”<br />
Cyclone hose<br />
Art. Nr. Designation Size<br />
437-514 ID5300 200 mm 8”<br />
Blow hose<br />
Art. Nr. Designation Size<br />
437-659 Soft, L= 20 m 127 mm 5”<br />
437-660 Soft, L= 20 m 152 mm 6”<br />
16<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
Main filter and safety filter<br />
Our vacuum loaders are equipped with two filter systems. Regular filter changing intervals<br />
safeguards low fuel consumption. Studies made show reduced fuel consumption by as much<br />
as 4000 l fuel/year.<br />
The filter systems also helps preserving the operators’ health and the environment.<br />
Optional main filters<br />
In addition to dry material such as sand/gravel, soil, fly ash, ore and steel shot the vacuum<br />
loader can handle fluids, wet material and sludge.<br />
For an optimum filter function the working environment as well as the material to be handled<br />
should be considered. Not least important is the choice of a proper filter material for the vacuum<br />
loader.<br />
For the main filter you have/there are the following options:<br />
1. DISAB Dry Solution<br />
2. DISAB Moisture Solution<br />
3. DISAB Antistatic Solution<br />
4. DISAB Gore-Tex® Membrane Solution<br />
5. DISAB Spark Solution<br />
6. DISAB Gore-Tex® Antistatic Solution<br />
1. DISAB Dry Solution<br />
For dry material only. With this standard filter you manage easy jobs.<br />
2. DISAB Moisture Solution<br />
For possible wet or oily residues in the material to be handled. The Moisture Solution is Teflon®coated<br />
for minimum absorption of moist and oil.<br />
3. DISAB Dry Antistatic Solution<br />
For dry material and for diverting static electricity when handling dust. By diverting the static<br />
load the dust explosion hazard is minimized. Also a reduced fall of pressure is achieved since<br />
there is no static electricity adhering the particles to the filter material.<br />
4. DISAB Gore-Tex® Membrane Solution<br />
Preventing even the smallest particles from entering the system and for maintaining a high<br />
filtration rating for a very long time. This solution also works in wet material since no particles<br />
will enter the filter.<br />
5. DISAB Spark Solution<br />
For dry material and for applications when there is a risk for sparks formation or warm particles<br />
in the material. The surface is coated with spark-arresting coal fibres.<br />
6. DISAB Gore-Tex® Antistatic Solution<br />
A <strong>com</strong>bination of the Dry Antistatic and the Gore-Tex Membrane Solution.<br />
Safety filter<br />
With a safety filter installed, the emission of microscopic parts is brought down - all for the benefit<br />
of the operator’s working environment. Based on the vacuum loader model there are either<br />
two or three safety filters fitted on top of the vacuum pump as protection of the pump in case of<br />
a leak in the main filters.<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 17
Art. Nr. Type Material Unit<br />
416-138 Filter bag DISAB Spark Solution -1812<br />
416-139 Filter bag DISAB Dry Solution -1812<br />
416-140 Filter bag DISAB Gore-Tex® Membrane Solution -1812<br />
416-155 Filter bag DISAB Moister Solution -1812<br />
416-141 Filter bag DISAB Spark Solution -32XX<br />
416-142 Filter bag DISAB Dry Solution -32XX<br />
416-143 Filter bag DISAB Gore-Tex® Membrane Solution -32XX<br />
416-156 Filter bag DISAB Moister Solution -32XX<br />
419-132 Filter bag DISAB Gore-Tex® Membrane Solution 9st -1513<br />
419-131 Filter bag DISAB Dry Solution 9st -1513<br />
419-136 Filter bag DISAB Gore-Tex® Antistatic Solution 9st -1513<br />
419-134 Filter bag DISAB Dry Solution 6st -1513<br />
419-133 Filter bag DISAB Gore-Tex® Membrane Solution 6st -1513<br />
419-135 Filter bag DISAB Gore-Tex® Antistatic Solution 6st -1513<br />
416-144 Hose filter DISAB Dry Solution<br />
416-153 Hose filter DISAB Moisture Solution<br />
416-145 Hose filter DISAB Spark Solution<br />
416-147 Hose filter DISAB Gore-Tex® Membrane Solution<br />
416-151 Hose filter DISAB Dry Antistatic Solution<br />
416-152 Hose filter DISAB Gore-Tex® Antistatic Solution<br />
Other sizes on request!<br />
18<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
Filter cassettes -1812, DECO<br />
Art.Nr. Designation<br />
417-011 1122 x 970 mm, galvanized<br />
Filter cassettes -32XX<br />
Art.Nr. Designation<br />
417-012 850 x 900 mm, galvanized<br />
Filter cassettes -1513<br />
Art.Nr. Designation<br />
417-014 1140 x 1100 mm, galvanized<br />
417-013 800 x 1110 mm, galvanized<br />
417-015 1140 x 1100 mm, stainless steel<br />
417-016 800 x 1110 mm, stainless steel<br />
-1812, DECO, -32xx, -1513<br />
Support basket for hose filters<br />
Art. Nr. Designation<br />
416-149 Support basket, galvanized<br />
416-150 Support basket, stainless steel<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 19
Air filter<br />
Art. Nr. Designation Type<br />
416-120 Safety/Air cooling filter P210/<br />
DECO<br />
416-130 Safety /Air cooling filter LN200<br />
416-125 Safety/Air cooling filter P210/<br />
DECO<br />
416-130 Safety /Air cooling filter LN200<br />
416-123 Safety/Air cooling filter/HEPA10 P210/<br />
DECO<br />
416-126 Safety/Air cooling filter/HEPA10 LN200<br />
416-137 Safety/Air cooling filter/HEPA13 P210/<br />
DECO<br />
Various filters<br />
Art. Nr. Designation<br />
Filter for Volvo engine<br />
402-104 Main oil filter<br />
402-106 Fuel filter<br />
Filter for Caterpillar engine<br />
402-415 Pre-filter<br />
402-416 Oil filter<br />
402-417 Fuel filter<br />
Hydraulic oil filter<br />
Art. Nr. Designation<br />
474-511 Liner to MHT 302<br />
472-115 Liner to return filter RE 50 CDI<br />
473-429 Return filter Ø 130xL140<br />
472-143 Return filterØ70xL350<br />
472-138 Respiration filter<br />
20<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
Service box to minimize down time<br />
Art. Nr. Designation Qty<br />
490-080 Service box<br />
Containing:<br />
Grease cartridge HI-temp 1<br />
Wet level guard 1<br />
Paddle dry level guard 1<br />
Emergency relay Duelco 1<br />
Solenoid valve 5-2 1<br />
Proximity switch rpm 1<br />
Proximity switch position 1<br />
Angled cable connector 2<br />
Kaeser Omega fluid 5 liter 1<br />
Manometer -1/+3 rear connection 1<br />
Box 575-590-260 mm 1<br />
13 mm open spanner 2<br />
24 mm open spanner 2<br />
30 mm open spanner 1<br />
12” adjustable spanner 2<br />
Grease gun 1<br />
BigBag with filling and emptying pipe - Volume 840 litre<br />
Art. Nr. Designation Size<br />
419-200 Bigbag standard* 90x90x114 cm<br />
* For volume orders, please contact DISAB:s spare parts sale<br />
department<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01 21
Profile products<br />
Cap<br />
Art. Nr. Designation<br />
499-563 Cap<br />
Reflective vest<br />
Art. Nr. Designation<br />
499-710 Reflective vest<br />
T-shirt<br />
Art. Nr. Designation Size<br />
499-564 T-shirt M<br />
499-465 T-shirt L<br />
499-566 T-shirt XL<br />
Windbreaker<br />
Art. Nr. Designation Size<br />
499-542 Windbreaker S<br />
499-538 Windbreaker M<br />
499-539 Wiindbreaker L<br />
499-540 Windbreaker XL<br />
499-541 Windbreaker XXL<br />
Winter jacket<br />
Art. Nr. Designation Size<br />
499-548 Winter jacket M<br />
499-549 Winter jacket L<br />
499-550 Winter jacket XL<br />
499-579 Winter jacket XXL<br />
Thermos mug<br />
Art. Nr. Description<br />
499-581 DISAB mug<br />
22<br />
DISAB Vacuum Technology AB<br />
P.O. Box 170<br />
SE-241 23 Eslöv<br />
e-mail<br />
mobile@disab.<strong>com</strong><br />
www<br />
www.disab.<strong>com</strong><br />
Telephone<br />
+ 46 413 55 43 00<br />
Telefax<br />
+ 46 413 55 43 01
Distributor: