info - Scanrex
info - Scanrex info - Scanrex
HOTMELT SYSTEM HVP 300 HTM 200L The HVP 300 HTM 200 L is a double acting pneumatic piston pump for pumping high viscosity materials out of 200 litre delivery containers. The pump is equipped with heating elements to heat and to keep the material at a temperature up to +150°C. Main areas of use are glue and sealing compounds that needs to be heated during application, i.e. Polyurethane, Epoxy and Butyl. The robust design of the pump provides rugged dependability and ease of maintenance. The base plate of the pump fits EUR standard pallets.
HOTMELT SYSTEM<br />
HVP 300 HTM 200L<br />
The HVP 300 HTM 200 L<br />
is a double acting pneumatic<br />
piston pump for pumping high<br />
viscosity materials out of 200<br />
litre delivery containers.<br />
The pump is equipped with<br />
heating elements to heat and<br />
to keep the material at a<br />
temperature up to +150°C.<br />
Main areas of use are glue<br />
and sealing compounds that<br />
needs to be heated during<br />
application, i.e. Polyurethane,<br />
Epoxy and Butyl. The robust<br />
design of the pump provides<br />
rugged dependability and<br />
ease of maintenance. The<br />
base plate of the pump fits<br />
EUR standard pallets.
Technical data HVP 300 HTM 200 L<br />
Pressure ratio 45:1<br />
Material pressure max<br />
270 bar<br />
Air consumption approx 1.0 m3/min<br />
at 6 bar and 20 double strokes.<br />
Air pressure max<br />
6 bar<br />
Capacity<br />
120 cm3/double stroke<br />
Air hose connection inv R 1/2”<br />
Material hose connection inv R 1”<br />
Shaft sealing<br />
PTFE<br />
O-rings<br />
VITON<br />
Sleeve (pressure plate) VULKOLAN<br />
Pump shaft Hard chromed steel<br />
Valve seat/cone Hardened tool steel<br />
Measurements and Weight<br />
Floor space, width x length 1100x1250 mm<br />
Height max<br />
3000 mm<br />
Height material container max 1000 mm<br />
Weight std pump<br />
ca 500 Kg<br />
Noise level<br />
Change language