specs

PART 1 - GENERAL
SECTION 01740
WARRANTIES AND BONDS
1.01 GENERAL
A. Compile specified warranties and bonds.
B. Compile specified service and maintenance contracts.
C. Co-execute submittals when so specified.
D. Review submittals to verify compliance with Contract Documents.
E. Submit to Architect for review and transmittal to Owner.
F. Related requirements in other parts of the Project Manual:
1. General Warranty of Construction: Conditions of the Contract.
G. Related Requirements Specified in other sections:
1. Warranties and bonds required for specific products: each respective section of the Specifications listed
below.
2. Provisions of warranties and bonds, duration: The respective section of specifications which specifies
product.
1.02 SUBMITTAL REQUIREMENTS
A. Assemble warranties, bonds and service and maintenance contracts, executed by each of the respective
manufacturers, suppliers and sub-contractors.
B. Number of original signed copies required: Two each.
C. Table of Contents: neatly typed, in orderly sequence. Provide complete information on each item.
1. Product or work item.
2. Firm, with name of principal, address and telephone number.
3. Scope.
4. Date of beginning of warranty, bond or service and maintenance contract.
5. Duration of warranty, bond or service maintenance contract.
6. Provide information for Owner's Personnel:
a. Proper procedures in case of failure.
b. Instances which might affect the validity of warranty or bond.
7. Contractor, name of responsible principal, address and telephone number.
1.03 FORM OF SUBMITTALS
A. Prepare in duplicate packets.
B. Format:
1. Size 8 1/2" x 11" punched sheets for three ring binders.
a. Fold larger sheets to fit into binders.
2. Cover: Identify each packet with typed or printed title "WARRANTIES AND BONDS". List:
a. Title of project Section 01740
b. Name of Contractor
C. Binders: Commercial quality, three ring, with durable and cleanable plastic covers.
1.04 TIME OF SUBMITTALS
A. For equipment or components parts of equipment put into service during progress of construction, submit
documents within ten days after inspection and acceptance.
B. Other wise, make submittals within ten days after Date of Substantial completion, prior to final request for
payment.
C. For items or work where acceptance is delayed materially beyond the Date of Substantial Completion, provide
updated submittal within ten days after acceptance, listing the date of acceptance as the start of the warranty
period.
NAPA CENTURY CENTER XD 12
#165582