specs

Section 01410
Page 2
C. The laboratories are not authorized to revoke, alter, relax, enlarge or release any requirements of the Contract
Documents, or to approve or accept any portion of the work. The duty of the laboratories is to test and/or
sample and report on a timely basis.
PART 2 - PRODUCTS
2.01 MATERIALS
A. Materials in conjunction with the work of this Section shall be as required for the various tests.
PART 3 - EXECUTION
3.01 SUBGRADE DENSITY TEST
A. Establish moisture density relationship of subgrade and select fill in accordance with ASTM D-698.
B. Perform in-place density test of completed select fill subgrade beneath building slabs-on-grade and stabilized
sub-grade beneath paving in accordance with ASTM D-2167 as follows:
1. Building Subgrade: one test per lift for each 5,000 s.f. area.
3.02 TESTING OF CONCRETE
A. Refer to Section 03300 for specific requirements. These apply to all concrete placed for Section 03300 and
Section 02514.
3.03 MORTAR, GROUT AND CONCRETE MASONRY UNITS
A. Refer to Section 4100 and Section 4200 for specific requirements.
3.04 STRUCTURAL STEEL
A. Refer to Section 05100 for specific requirements.
END OF SECTION
NAPA CENTURY CENTER XD 12
#165582