specs

C. Review of separate item does not constitute review of an assembly.
D. Affix stamp and initials or signature certifying to review of submittal.
E. Return submittals to Contractor for distribution.
Section 01340
Page 3
1.08 REQUIRED SUBMITTALS
A. Shop Drawings to be returned within 90 days from Contract Award. (also refer to specification section for
submittal requirements). Provide submittals applicable to commissioned systems with Ownder’s
Commissioning Agent.
1. LEED Checklist
2. Construction Waste Management
3. Indoor Air Quality Management
4. General Commissioning Requirements
5. Building Envelope Commissioning
6. Irrigation
7. Planting
8. Earthwork
9. Termite Control
10. Concrete Foundation and Reinforcement
11. Concrete Wall Panels
12. Mortar and Grout
13. Concrete Masonry Units
14. Structural Steel
15. Steel Joists and Joist Girders
16. Metal Decking
17. Metal Fabrications
18. Steel Stairs & Railing
19. Miscellaneous Metals
20. Pre-finished Steel Railings
21. Expansion Joint Cover Assemblies
22. Rough Carpentry
23. Finish Carpentry & Millwork
24. Membrane Waterproofing
25. Building Insulation
26. Exterior Insulation and Finish System
27. Roofing Membrane and Accessories – (also see section for FM Global review requirements)
28. Composite Metal Building Panels
29. Preformed Metal Siding
30. Sheet Metal Flashing and Trim
31. Metal Roof Panels
32. Metal Fabrications
33. Sealants and Caulking
34. Metal Doors and Frames
35. Plastic Faced and Flush Wood Doors
36. Aluminum Entrances and Storefronts
37. Finish Hardware and Hardware Schedule - NO SUBSTITUTIONS
38. Glass and Glazing
39. Glazed Aluminum Curtainwall
40. Lath and Portland Cement Plaster
41. Ceramic Tile - NO SUBSTITUTIONS
42. Acoustical Ceiling - NO SUBSTITUTIONS
43. Vinyl Wallcovering - NO SUBSTITUTIONS
44. Wall Carpets - NO SUBSTITUTIONS
45. Prefinished Panels
46. Resilient Flooring & Base - NO SUBSTITUTIONS
47. Carpet – (By CUSA)
48. Carpet Tile – (By CUSA)
49. Special Coatings
NAPA CENTURY CENTER XD 12
#165582