specs

PART 1 - GENERAL
1.01 GENERAL
A. Designate in Construction Schedule delivery rates for products under each allowance.
B. Designate in Schedule of Values quantities of materials specified under unit cost allowances.
SECTION 01020
ALLOWANCES
1.02 ALLOWANCES FOR PRODUCTS
A. Purchase products under each allowance as directed by Architect.
B. Include following amount in Bid, for inclusion in Contract Sum only for those materials not specified on
the drawings:
C. Amount of each allowance includes the following, unless otherwise indicated above:
1. Net cost of product.
2. Delivery and unloading at site.
3. Applicable taxes.
D. In addition to amounts of allowances, include in Proposal, for inclusion in Contract Sum, Contractor's costs
for:
1. Handling at site, including crating and storage.
2. Protection from elements, from damage.
3. Labor, installation, and finishing.
4. Other expenses required to complete installation.
5. Overhead and profit.
1.03 SELECTION OF PRODUCTS
A. Architect's duties:
1. Consult with Contractor in consideration of products and suppliers.
2. Make selection, designate products to be used.
3. Notify Contractor, in writing, designating:
a. Product, model and finish.
b. Accessories and attachments.
c. Cost, delivered at site.
B. Contractor's Duties:
1. Assist Architect in determining qualified suppliers.
2. Obtain proposals from suppliers when requested by Architect.
3. Make appropriate recommendations for consideration of Architect.
4. Notify Architect of any effect anticipated by selection of product or supplier under consideration on:
a. Construction Schedule
Contract Sum
5. On notification of selection, enter into purchase agreement with designated suppliers.
1.04 DELIVERY
A. Contractor's Responsibility:
1. Arrange for delivery and unloading.
2. Promptly inspect products for damage or defects.
3. Submit claims for transportation damage.
NAPA CENTURY CENTER XD 12
#165582