specs

SECTION 16120
SITE CONDUCTORS AND CABLES
PART 1 - GENERAL
1.01 RELATED DOCUMENTS
A. Drawings and general provisions of the Contract, including General and Supplementary
Conditions and Division 1 Specification Sections, apply to this Section.
1.02 SUMMARY
A. This Section includes building wires and cables and associated connectors, splices, and
terminations for wiring systems rated 600 V and less.
B. Related Sections include the following:
1. Section “Electrical Identification” for color-coding and wire markers.
2. Section “Raceways and Boxes” for conduits, boxes, and cabinets.
1.03 SUBMITTALS
A. Product Data: For each type of product indicated.
B. Field Quality-Control Test Reports: for Contractor’s pre-testing of equipment and
systems.
1.04 QUALITY ASSURANCE
A. Testing Agency: The Contractor will retain the services of an independent testing agency
as defined by OSHA in 29 CFR 1910.7 or a member company of the InterNational
Electrical Testing Association to perform final testing of equipment and systems. The
Contractor is required to perfume pre-testing to ensure compliance with the specifications
prior to turning over to the testing agency for final test.
B. Electrical Components, Devices, and Accessories: Listed and labeled as defined in
NFPA 70, Article 100, by a testing agency acceptable to the Owner, and marked for
intended use.
C. Comply with NFPA 70.
11020 CONDUCTORS AND CABLES
06/21/10: jmy: REV. 07/11 16120 -1 LPAS PROJECT NO.